thus Robert spake:
Timo Schoeler wrote:
thus Alexander Farber spake:
Do you see any kernel output at all? I believe one
should always see at least the boot> prompt -
unless the serial speed of the console doesn't match
Do you see the boot> prompt and have you tried "verbose"?
On 5/11/06, Robert <[EMAIL PROTECTED]> wrote:
Alexander Farber wrote:
h754815:afarber {103} cat /etc/hostname.fxp0
inet 81.169.186.95 255.255.255.255 NONE
!route add 81.169.186.1 -link \$if: -interface
PS: I wonder if anyone successfully runs OpenBSD
at Strato's SR2, MR2 or LR2 as I'd like to upgrade
On 5/11/06, Dan Farrell <[EMAIL PROTECTED]> wrote:
Geez network setups just shouldn't be that strained... I mean, what
happened to hooking up a server with a /30 connection to the nearest
router? Am I missing something?
I think Strato, 1&1 and co introduced the .255 hack to counter sniffing.
Using .0 netmask works, but won't allow traffic with other hosts in the
same subnet. (Which shouldn't be a problem for most.)
I have not tried any of the new Strato servers, but am experimenting
with one of 1&1's new AMD64 systems.
So far, nothing that i dd to the hd will boot.
(tried 3.9 and current floppy and cd, modified for serial-acc and also
disabling the usual kernel-options like pcibios)
Anyone got one of those systems to run OpenBSD?
For those interested here's the debian-resycue-system dmesg and lspci
output for an 1&1 L64 server. Perhaps someone can see unsupported
hardware i don't.
http://openbsd.pap.st/1und1_L64.txt
Any advice'd be much apreciated.
did anybody into the problem of device timeouts for the NIC itself? i
tried to install OpenBSD on three or few machines at strato, none did
the job. i also tried NetBSD, same problem. it seems to be up to a weird
interrupt routing...
Which kind of servers did you try?
At Strato i had no problems with the Highend SR. That's what they
offered last year. i386/Celeron 2400 running OpenBSD without a problem.
fxp0 at pci2 dev 6 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
address 00:30:48:52:12:34
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 7 function 0 "Intel 82557" rev 0x08, i82559: irq 10,
address 00:30:48:52:12:35
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
-Robert
STRATO HighEnd-Server SR (v3.4)
tried OpenBSD 3.8 and NetBSD 3.0 and -current. no dmesg as i don't
maintain that machine any longer. what i remember is that the MAC
addresses were not the actual addresses of the interfaces. linux,
however, figured them out correctly (which is the main fact i don't
maintain them any longer ;)
--
Timo Schoeler | http://riscworks.net/~tis | [EMAIL PROTECTED]
RISCworks -- Perfection is a powerful message
ISP | POWER & PowerPC afficinados | Networking, Security, BSD services
GPG Key fingerprint = B5F6 68A4 EC45 C309 6770 38C4 50E8 2740 9E0C F20A
There are 10 types of people in the world. Those who understand binary
and those who don't.
