Comments to Strato:
I used Yaifo to install OpenBSD on STRATO.
And I used the Netmask 255.255.0.0.
I forgot to change Yaifo so I had to rename my installsets to *38.tgz. :))
Here`s a DMESG (Server is from an older offer):
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 534552576 (522024K)
avail mem = 480755712 (469488K)
using 4278 buffers containing 26828800 bytes (26200K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/03/04, BIOS32 rev. 0 @ 0xf0010
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6180/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa600 0xca800/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02: aperture at
0xf0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: irq 5,
address 00:00:aa:dd:cc:aa
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 10
iic0 at ichiic0
"unknown" at iic0 addr 0x18 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffcd netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Btw: If you can fuck STRATOs DNS-Failerover (I wont emntion any methods)
you can sniff even their internal Network-Traffic from the 172er LAN
(somebody told me so....).
Anyway STRATO sucks and their Admins are fucke dup...
Example:
arp info overwritten for 81.169.163.106 by 00:0f:35:3b:cf:40 on fxp0
arp info overwritten for 81.169.163.106 by 00:00:5e:00:01:02 on fxp0
arp info overwritten for 81.169.163.106 by 00:0f:35:3b:cf:40 on fxp0
arp info overwritten for 81.169.163.106 by 00:00:5e:00:01:02 on fxp0
arp info overwritten for 81.169.163.106 by 00:0f:35:3b:cf:40 on fxp0
arp info overwritten for 81.169.163.106 by 00:00:5e:00:01:02 on fxp0
arp info overwritten for 81.169.163.106 by 00:0f:35:3b:cf:40 on fxp0
arp info overwritten for 81.169.163.106 by 00:0f:35:3b:cf:40 on fxp0
They can`t even configure their CISCO-Switches.
Realy just retarded morons...
Kind regards,
Sebastian
