On 2018-08-04, Jay Hart <jh...@kevla.org> wrote: >> On 2018-08-03, Jay Hart <jh...@kevla.org> wrote: >>>> On 2018-08-03, Jay Hart <jh...@kevla.org> wrote: >>>>> Let me add a bit more data: >>>>> >>>>> MITAC PD11BICC motherboard (running Intel Indian Bay Trail chipset I >>>>> think). >>>>> >>>>> Link to motherboard manual: >>>>> https://globalamericaninc.com/manuals/2809056.pdf >>>>> >>>>> Has both a DVI-I and VGA port. I have only tried the VGA port but assume >>>>> same issue if I use >>>>> the >>>>> DVI-I port. >>>>> >>>>> OpenBSD 6.3 installed just fine, just can't get it boot now, so I don't >>>>> think its a BIOS >>>>> setting >>>>> per se, but don't know this for a fact. >>>>> >>>>> I can't get you dmesg, else I'd post it. The info I got below was best I >>>>> could get with a cell >>>>> phone. >>>> >>>> Are you intending to run it as a graphical workstation? If not, try "b -c" >>>> at the bootloader prompt, then "disable inteldrm" and "quit". That is >>>> likely >>>> to get it booting - if so, you should be able to get a dmesg. (The on-disk >>>> kernel can be edited with "config -ef /bsd"). >>>> >>> That worked and I'm able to boot and reboot box into openbsd, thanks much. >>> Exactly when will I >>> have to modify the boot command (to disable inteldrm) in order to continue >>> booting, assume every >>> time I upgrade from one release to another, and any time I install a patch >>> that relinks to >>> another >>> kernel? >> >> Whenever you change the kernel. Note that syspatch won't work with a >> modified kernel. >> >>> One thing I'm having an issue understanding is why openbsd appears not to >>> see the full 8GB of >>> RAM >>> in this box. >>> >>> Here is the dmesg: >>> OpenBSD 6.3 (GENERIC.MP) #6: Sun Jul 29 11:50:15 CEST 2018 >>> >>> r...@syspatch-63-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP >> >> That's a 32-bit kernel. Try amd64 instead, bay trail supports 64-bit. >> Whoi knows, maybe video will work without further tweaking there. (It does >> work on other J1900 machines). >> > Ok, got it working on amd64, but with same issue as before on inteldrm, still > have to disable it:
Are you able to try booting a snapshot kernel? If you download one and save to / under a different name, you can do "boot (filename)" at the boot loader prompt. It may not help but is a useful extra datapoint (and you can test quickly that without updating the whole OS to a snapshot). If it still doesn't help, best I can suggest at this point is to send a mail to b...@openbsd.org with the information from sendbug (run as root to get some pci information etc that is only available as root). If mail is setup on the system you can run it directly, but it's often easier to write to a file and move to the mail client that way, use sendbug -P for that. > System now sees 8GB RAM. Awesomeness there... > > #sysctl hw > hw.machine=amd64 > hw.model=Intel(R) Celeron(R) CPU J1900 @ 1.99GHz > hw.ncpu=4 > hw.byteorder=1234 > hw.pagesize=4096 > hw.disknames=sd0:6cbe2cb3733c587d > hw.diskcount=1 > hw.sensors.cpu0.temp0=31.00 degC > hw.sensors.acpitz0.temp0=26.80 degC (zone temperature) > hw.cpuspeed=1993 > hw.setperf=100 > hw.vendor=AMI Corporation > hw.product=Aptio CRB > hw.uuid=00020003-0004-0005-0006-000700080009 > hw.physmem=8455688192 > hw.usermem=8455675904 > hw.ncpufound=4 > hw.allowpowerdown=1 > hw.perfpolicy=manual > > #demsg > OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8455688192 (8063MB) > avail mem = 8192352256 (7812MB) > User Kernel Config > UKC> disable inteldrm > 226 inteldrm* disabled > UKC> exit > Continuing... > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries) > bios0: vendor American Megatrends Inc. version "D7400A04" date 12/21/2016 > bios0: AMI Corporation Aptio CRB > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT MCFG LPIT HPET SSDT SSDT SSDT UEFI > acpi0: wakeup devices PS2K(S3) PS2M(S3) XHC1(S4) PXSX(S4) PXSX(S4) PXSX(S4) > PXSX(S4) PWRB(S0) > BRCM(S0) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.45 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN > cpu0: 1MB 64b/line 16-way L2 cache > acpitimer0: recalibrated TSC frequency 2000005358 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 83MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN > cpu1: 1MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN > cpu2: 1MB 64b/line 16-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN > cpu3: 1MB 64b/line 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins > acpimadt0: bogus nmi for apid 0 > acpimadt0: bogus nmi for apid 2 > acpimadt0: bogus nmi for apid 4 > acpimadt0: bogus nmi for apid 6 > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpihpet0: recalibrated TSC frequency 2000006880 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus -1 (RP03) > acpiprt4 at acpi0: bus 2 (RP04) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PLPE > acpipwrres1 at acpi0: PLPE > acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1 > acpipwrres3 at acpi0: CLK0, resource for CAM1 > acpipwrres4 at acpi0: CLK1, resource for CAM0, CAM2 > acpipwrres5 at acpi0: FN00, resource for FAN0 > acpitz0 at acpi0: critical temperature is 90 degC > "INT3396" at acpi0 not configured > "DMA0F28" at acpi0 not configured > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: SLPB > "BCM2E1A" at acpi0 not configured > "BCM4752" at acpi0 not configured > "INTCF0B" at acpi0 not configured > "INTCF1A" at acpi0 not configured > "INTCF1C" at acpi0 not configured > "SMO91D0" at acpi0 not configured > "ATML2000" at acpi0 not configured > "INT33BD" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826, 1743, > 1660, 1577, 1494, 1411, > 1328 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e > vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct > fixed naa.5002538d42080137 > sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x0e: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address > 00:22:4d:d1:48:d4 > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > ppb1 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi > pci2 at ppb1 bus 2 > re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address > 00:22:4d:d1:48:d5 > rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0 > pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e > ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 1 > int 18 > iic0 at ichiic0 > iic0: addr 0x2d 00=6a 01=7b 02=d0 03=d5 04=80 05=7b 07=cd 08=cc 0d=ff 0e=ff > 0f=ff 10=1f 11=20 > 12=1b 13=48 15=1f 17=ff 18=48 19=48 1a=20 1c=1f 1d=1f 1e=1f 1f=07 20=ff 21=1f > 22=ff 23=1f 24=04 > 25=08 2a=ae 2b=a1 2c=4d 2d=ff 2e=ff 2f=ff 34=26 35=c6 3d=ff 3e=ff 3f=ff 46=ff > 47=ff 48=ff 49=ff > 4a=ae 4b=a1 4c=4d 4d=ff 4e=80 4f=76 6b=48 6f=ff 72=01 76=01 79=01 7d=01 7f=ff > 80=ff 81=0f 82=3f > 83=3f 84=1f 85=07 86=33 87=ff 88=ff 89=ff 8a=ff 8b=ff 8c=ff 8d=ff 8e=ff 8f=ff > 90=da 92=ff 94=ff > 96=ff 98=ff 9a=ff 9c=ff 9e=ff a0=ff a2=ff a4=ff a6=ff a8=96 a9=64 aa=96 ab=64 > ac=e1 ad=96 ae=ff > af=ff b0=01 b1=02 b2=03 b3=0c b4=0d b5=01 b6=01 b7=08 b8=08 b9=08 ba=08 bb=08 > bc=08 bd=ff be=ff > bf=ff c0=7f c1=7f c4=7f c5=7f c6=50 c7=4b c8=7f c9=7f ca=50 cb=4b cc=7f cd=7f > ce=50 cf=4b d0=7f > d1=7f d2=50 d3=4b d4=7f d5=7f d6=50 d7=4b d8=ff d9=ff da=ff db=ff dc=ff dd=ff > de=ff df=ff e0=ff > e1=1f e2=ff e3=1f e4=ff e5=1f e6=ff e7=1f e8=ff e9=1f ea=ff eb=ff ec=ff ed=ff > ee=ff ef=ff f0=03 > f1=03 f2=03 f3=01 f4=01 f6=2a f7=2d f8=05 f9=ff fa=ff fb=ff fc=ff fd=5c fe=5c > ff=c1 words 00=6aff > 01=7bff 02=d0ff 03=d5ff 04=80ff 05=7bff 06=00ff 07=cdff > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52 > wbsio0 port 0xa10/2 not configured > vmm0 at mainbus0: VMX/EPT > uhub1 at uhub0 port 3 configuration 1 interface 0 "Alcor Micro product > 0x6254" rev 2.00/1.00 addr 2 > uhub2 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" > rev 2.10/32.21 addr 3 > uhub3 at uhub0 port 7 configuration 1 interface 0 "vendor 0x05e3 product > 0x0612" rev 3.00/32.21 > addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (6cbe2cb3733c587d.a) swap on sd0b dump on sd0b > >
