> On 2018-08-03, Jay Hart <jh...@kevla.org> wrote:
>> Let me add a bit more data:
>>
>> MITAC PD11BICC motherboard (running Intel Indian Bay Trail chipset I think).
>>
>> Link to motherboard manual: https://globalamericaninc.com/manuals/2809056.pdf
>>
>> Has both a DVI-I and VGA port. I have only tried the VGA port but assume
>> same issue if I use the
>> DVI-I port.
>>
>> OpenBSD 6.3 installed just fine, just can't get it boot now, so I don't
>> think its a BIOS setting
>> per se, but don't know this for a fact.
>>
>> I can't get you dmesg, else I'd post it. The info I got below was best I
>> could get with a cell
>> phone.
>
> Are you intending to run it as a graphical workstation? If not, try "b -c"
> at the bootloader prompt, then "disable inteldrm" and "quit". That is likely
> to get it booting - if so, you should be able to get a dmesg. (The on-disk
> kernel can be edited with "config -ef /bsd").
>
That worked and I'm able to boot and reboot box into openbsd, thanks much.
Exactly when will I
have to modify the boot command (to disable inteldrm) in order to continue
booting, assume every
time I upgrade from one release to another, and any time I install a patch that
relinks to another
kernel?
Not intending to run graph workstation, Command line only box.
Have is a layout of my file system (just for S&Gs):
Filesystem Size Used Avail Capacity Mounted on
/dev/sd0a 1005M 99.5M 855M 10% /
/dev/sd0k 49.2G 18.0K 46.7G 0% /home
/dev/sd0l 123G 2.0K 117G 0% /stuff
/dev/sd0d 3.9G 10.0K 3.7G 0% /tmp
/dev/sd0f 7.9G 608M 6.9G 8% /usr
/dev/sd0g 3.9G 163M 3.6G 4% /usr/X11R6
/dev/sd0h 7.9G 26.0M 7.5G 0% /usr/local
/dev/sd0j 9.8G 2.0K 9.3G 0% /usr/obj
/dev/sd0i 9.8G 2.0K 9.3G 0% /usr/src
/dev/sd0e 9.6G 37.4M 9.1G 0% /var
One thing I'm having an issue understanding is why openbsd appears not to see
the full 8GB of RAM
in this box.
Here is the dmesg:
OpenBSD 6.3 (GENERIC.MP) #6: Sun Jul 29 11:50:15 CEST 2018
r...@syspatch-63-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz ("GenuineIntel" 686-class) 2.01
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
real mem = 3103174656 (2959MB)
avail mem = 3032608768 (2892MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/14/12, SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "D7400A04" date 12/21/2016
bios0: AMI Corporation Aptio CRB
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices PS2K(S3) PS2M(S3) XHC1(S4) PXSX(S4) PXSX(S4) PXSX(S4)
PXSX(S4) PWRB(S0)
BRCM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz ("GenuineIntel" 686-class) 2.01
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz ("GenuineIntel" 686-class) 2.01
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz ("GenuineIntel" 686-class) 2.01
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus 2 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: CLK0, resource for CAM1
acpipwrres4 at acpi0: CLK1, resource for CAM0, CAM2
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
"INT3396" at acpi0 not configured
"DMA0F28" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
"BCM2E1A" at acpi0 not configured
"BCM4752" at acpi0 not configured
"INTCF0B" at acpi0 not configured
"INTCF1A" at acpi0 not configured
"INTCF1C" at acpi0 not configured
"SMO91D0" at acpi0 not configured
"ATML2000" at acpi0 not configured
"INT33BD" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
bios0: ROM list: 0xc0000/0xe600!
cpu0: Enhanced SpeedStep 2001 MHz: speeds: 1993, 1992, 1909, 1826, 1743, 1660,
1577, 1494, 1411,
1328 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed
naa.5002538d42080137
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x0e: apic 1 int 16
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address
00:22:4d:d1:48:d4
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: apic 1 int 19
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address
00:22:4d:d1:48:d5
rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 1 int
18
iic0 at ichiic0
iic0: addr 0x2d 00=6b 01=7b 02=d0 03=d5 04=80 05=7b 07=cd 08=cd 0d=ff 0e=ff
0f=ff 10=20 11=21
12=1b 13=48 15=20 17=ff 18=48 19=48 1a=21 1c=20 1d=20 1e=20 20=ff 21=1f 22=ff
23=1f 24=04 25=0d
2a=ae 2b=a1 2c=4d 2d=ff 2e=ff 2f=ff 34=25 35=66 3d=ff 3e=ff 3f=ff 46=ff 47=ff
48=ff 49=ff 4a=ae
4b=a1 4c=4d 4d=ff 4e=80 4f=76 6b=48 6f=ff 76=01 79=01 7d=01 7f=ff 80=ff 81=0f
82=3f 83=3f 84=1f
85=07 86=33 87=ff 88=ff 89=ff 8a=ff 8b=ff 8c=ff 8d=ff 8e=ff 8f=ff 90=da 92=ff
94=ff 96=ff 98=ff
9a=ff 9c=ff 9e=ff a0=ff a2=ff a4=ff a6=ff a8=96 a9=64 aa=96 ab=64 ac=e1 ad=96
ae=ff af=ff b0=01
b1=02 b2=03 b3=0c b4=0d b5=01 b6=01 b7=08 b8=08 b9=08 ba=08 bb=08 bc=08 bd=ff
be=ff bf=ff c0=7f
c1=7f c4=7f c5=7f c6=50 c7=4b c8=7f c9=7f ca=50 cb=4b cc=7f cd=7f ce=50 cf=4b
d0=7f d1=7f d2=50
d3=4b d4=7f d5=7f d6=50 d7=4b d8=ff d9=ff da=ff db=ff dc=ff dd=ff de=ff df=ff
e0=ff e1=1f e2=ff
e3=1f e4=ff e5=1f e6=ff e7=1f e8=ff e9=1f ea=ff eb=ff ec=ff ed=ff ee=ff ef=ff
f0=03 f1=03 f2=03
f3=01 f4=01 f6=2a f7=2d f8=05 f9=ff fa=ff fb=ff fc=ff fd=5c fe=5c ff=c1 words
00=6bff 01=7bff
02=d0ff 03=d5ff 04=80ff 05=7bff 06=00ff 07=ceff
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0xa10/2 not configured
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX/EPT
uhub1 at uhub0 port 3 configuration 1 interface 0 "Alcor Micro product 0x6254"
rev 2.00/1.00 addr 2
uhub2 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.10/32.21 addr 3
uhub3 at uhub0 port 7 configuration 1 interface 0 "vendor 0x05e3 product
0x0612" rev 3.00/32.21
addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6cbe2cb3733c587d.a) swap on sd0b dump on sd0b
