Let me add a bit more data: MITAC PD11BICC motherboard (running Intel Indian Bay Trail chipset I think).
Link to motherboard manual: https://globalamericaninc.com/manuals/2809056.pdf Has both a DVI-I and VGA port. I have only tried the VGA port but assume same issue if I use the DVI-I port. OpenBSD 6.3 installed just fine, just can't get it boot now, so I don't think its a BIOS setting per se, but don't know this for a fact. I can't get you dmesg, else I'd post it. The info I got below was best I could get with a cell phone. Jay > Good afternoon, > > I'm trying to determine the level of support in 6.3 for an i915 chipset. If > it is not supported, > what driver might work? > > I've bought a new server and can't get it to boot. > > Upon startup, the boot up is proceeding normally until these lines are shown: > > pchb0 at pci0 dev 0 function 0 "Indian Bay Trail Host" rev 0x0e > inteldrm0 at pci0 dev 2 function o "Intel Bay Trail Video" rev 0x0e > drm0 at Inteldrm0 > Inteldrm0: msi > > At this point, the box reboots into BIOS. > > Any suggestions to try and get the box booting? > > Thanks, > > Jay > >
