im really not sure, but i think the secound cpu is not found at the same
time in boot process as the first. i had an ibm intellisation with 2
cpus. the sec cpu was listed in dmesg after mounting fs.
you dont see sec cpu in # top?
any one knows thats ok?
On Mon, 2006-01-30 at 12:15 +0400, Bruno Carnazzi wrote:
> Hi all,
>
> Everything seems to work fine but OpenBSD find only one CPU ! :(
> Somebody know why and how can I use the 2 CPUs ?
>
> Thank you,
>
> Bruno.
>
> Here is the dmesg :
>
> OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 2147049472 (2096728K)
> avail mem = 1953083392 (1907308K)
> using 4278 buffers containing 107454464 bytes (104936K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> SouthBridge" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
> 0xe8000/0x6000 0xee000/0x2000!
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> pci1 at pchb1 bus 3
> cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 10
> Compaq Integrated Array
> scsibus0 at cac0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
> sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
> fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
> address 00:02:a5:29:15:f0
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
> address 00:0a:5e:5a:c9:a4
> exphy0 at xl0 phy 24: 3Com internal media interface
> pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
> pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask f7c5 netmask ffe5 ttymask ffe7
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
