top show me only one CPU...
load averages: 0.09, 0.11, 0.06
14:23:20
24 processes: 23 idle, 1 on processor
CPU states: 0.0% user, 0.0% nice, 0.2% system, 2.0% interrupt, 97.8% idle
Memory: Real: 14M/172M act/tot Free: 1842M Swap: 0K/299M used/tot
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
5862 _squid 2 0 4136K 5968K sleep poll 0:00 0.00% squid
31899 root 2 0 3312K 2120K idle netio 0:00 0.00% sshd
19342 root 2 0 572K 1092K sleep poll 0:00 0.00% top
12615 named 2 0 2092K 2344K idle select 0:00 0.00% named
11338 root 18 0 396K 456K idle pause 0:00 0.00% ksh
17509 bcarnazz 2 0 3288K 1392K sleep select 0:00 0.00% sshd
13242 root 2 0 1188K 1132K sleep select 0:00 0.00% sendmail
4659 _ntp 2 0 348K 584K sleep poll 0:00 0.00% ntpd
30535 bcarnazz 18 0 540K 468K sleep pause 0:00 0.00% ksh
22523 _syslogd 2 0 356K 552K idle poll 0:00 0.00% syslogd
31515 bcarnazz 28 0 400K 1024K onproc - 0:00 0.00% top
10975 _squid -6 0 184K 304K idle piperd 0:00 0.00% unlinkd
1 root 10 0 264K 308K idle wait 0:00 0.00% init
1079 root 2 0 440K 664K sleep select 0:00 0.00% cron
26496 root 3 0 248K 524K idle ttyin 0:00 0.00% getty
6457 root 3 0 340K 524K idle ttyin 0:00 0.00% getty
28005 root 3 0 352K 532K idle ttyin 0:00 0.00% getty
6209 root 3 0 228K 532K idle ttyin 0:00 0.00% getty
148 root 2 0 404K 620K idle poll 0:00 0.00% ntpd
3980 root 10 0 864K 568K idle wait 0:00 0.00% squid
2756 root 2 0 328K 512K idle netio 0:00 0.00% syslogd
15677 root 2 0 556K 896K idle select 0:00 0.00% sshd
8774 root 2 0 280K 488K idle select 0:00 0.00% inetd
882 root 2 0 1476K 532K idle netio 0:00 0.00% named
On 1/30/06, Marco Fretz <[EMAIL PROTECTED]> wrote:
> im really not sure, but i think the secound cpu is not found at the same
> time in boot process as the first. i had an ibm intellisation with 2
> cpus. the sec cpu was listed in dmesg after mounting fs.
>
> you dont see sec cpu in # top?
>
> any one knows thats ok?
>
>
> On Mon, 2006-01-30 at 12:15 +0400, Bruno Carnazzi wrote:
> > Hi all,
> >
> > Everything seems to work fine but OpenBSD find only one CPU ! :(
> > Somebody know why and how can I use the 2 CPUs ?
> >
> > Thank you,
> >
> > Bruno.
> >
> > Here is the dmesg :
> >
> > OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > real mem = 2147049472 (2096728K)
> > avail mem = 1953083392 (1907308K)
> > using 4278 buffers containing 107454464 bytes (104936K) of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> > pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> > pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> > SouthBridge" rev 0x00)
> > pcibios0: PCI bus #0 is the last bus
> > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
> > 0xe8000/0x6000 0xee000/0x2000!
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> > pci1 at pchb1 bus 3
> > cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 10
> > Compaq Integrated Array
> > scsibus0 at cac0: 1 targets
> > sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct
> > fixed
> > sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec
> > total
> > fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
> > address 00:02:a5:29:15:f0
> > inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> > vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> > xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
> > address 00:0a:5e:5a:c9:a4
> > exphy0 at xl0 phy 24: 3Com internal media interface
> > pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
> > pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus1 at atapiscsi0: 2 targets
> > cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom
> > removable
> > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > sysbeep0 at pcppi0
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > biomask f7c5 netmask ffe5 ttymask ffe7
> > pctr: 686-class user-level performance counters enabled
> > mtrr: Pentium Pro MTRR support
> > dkcsum: sd0 matches BIOS drive 0x80
> > root on sd0a
> > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
