On Thu, May 11, 2017 at 01:50:58PM +0200, Jan Stary wrote:
> On May 10 14:28:16, mlar...@azathoth.net wrote:
> > On Wed, May 10, 2017 at 05:19:04PM +0200, Jan Stary wrote:
> > > This is current/i386 on a Compaq nx6310 laptop (dmesg below).
> >
> > This machine is notoriously bad. Did this ever work for you?
>
> I just got the machine, so this is a first install on it.
>
This particular model and a few like it have never worked well. And if it's
the same one I'm thinking about, it doesn't resume properly in Linux either
(could be wrong).
I'd say just use ZZZ. None of the developers has one of these anymore as
far as I know, so any debugging would be difficult. I posted a message to
tech or misc last year about how to troubleshoot resume issues, if you want
to dig into it yourself. Follow those troubleshooting steps and come back when
you've found the device or operation that is hanging the resume.
-ml
> >
> > > Mostly works, but I experience trouble with suspend/resume.
> > >
> > > apmd(8) is running with apmd_flags="-A", but closing the lid does nothing,
> > > eventhough machdep.lidsuspend=1 and machdep.lidaction=1
> > > Trying to suspend manually with Fn+F3 does nothing as well.
> > > Trying to suspend with apm(8)'s options does this:
> > >
> > > apm -S says
> > >
> > > May 10 16:12:32 hp apmd: system entering standby
> > > May 10 16:12:33 hp /bsd: uhub1 detached
> > > May 10 16:12:33 hp /bsd: uhub2 detached
> > > May 10 16:12:33 hp /bsd: uhub3 detached
> > >
> > > and, presumably, goes into standby. The power led is blinking.
> > > It will not resume: pressing the power button makes the power led
> > > light up again, but that's it. Even the display backlight
> > > stays turned off. The machine is not accessible remotely
> > > and needs to be forcefully restarted.
> > > /etc/apm/standby does not get called.
> > >
> > > apm -z says
> > >
> > > May 10 16:31:26 hp apmd: system suspending
> > > May 10 16:31:28 hp /bsd: uhub1 detached
> > > May 10 16:31:28 hp /bsd: uhub2 detached
> > > May 10 16:31:28 hp /bsd: uhub3 detached
> > >
> > > and, presumably, goes to suspend, but never resumes.
> > > The symptoms are the same as with apm -S.
> > > /etc/apm/suspend does not get called.
> > >
> > > apm -Z puts the system into hibernation, and it works.
> > > After pressing the power button, the machine boots,
> > > and unhibernates at the end of the boot sequence.
> > > /etc/apm/{hibernate,resume} get called.
> > >
> > > How can I help debug this?
> > >
> > > http://stare.cz/dmesg/compaq-nx6310.20170509
> > > http://stare.cz/dmesg/compaq-nx6310.acpidump.tar
> > > http://stare.cz/dmesg/compaq-nx6310.pcidump
> > >
> > > Jan
> > >
> > >
> > > OpenBSD 6.1-current (GENERIC) #0: Tue May 9 17:46:04 CEST 2017
> > > h...@hp.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC
> > > cpu0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz ("GenuineIntel" 686-class)
> > > 1.73 GHz
> > > cpu0:
> > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,SSE3,MWAIT,TM2,xTPR,PDCM,PERF,SENSOR
> > > real mem = 1601519616 (1527MB)
> > > avail mem = 1558122496 (1485MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: date 04/17/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev.
> > > 2.4 @ 0xf38eb (23 entries)
> > > bios0: vendor Hewlett-Packard version "68YDU Ver. F.0D" date 04/17/2007
> > > bios0: Hewlett-Packard 30AA
> > > acpi0 at bios0: rev 2
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT
> > > acpi0: wakeup devices C096(S5) C0F1(S3) C0F8(S3) C0F9(S3) C0FA(S3)
> > > C0FB(S3) C102(S5) C22B(S5) C115(S5) C22C(S5) C118(S5) C22C(S5)
> > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > acpihpet0 at acpi0: 14318179 Hz
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 132MHz
> > > cpu0: mwait min=64, max=64, C-substates=0.1.1.1, IBE
> > > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> > > acpiprt0 at acpi0: bus 2 (C096)
> > > acpiprt1 at acpi0: bus 8 (C102)
> > > acpiprt2 at acpi0: bus 24 (C115)
> > > acpiprt3 at acpi0: bus 32 (C118)
> > > acpiprt4 at acpi0: bus 0 (C002)
> > > acpiec0 at acpi0
> > > acpicpu0 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1
> > > halt)
> > > acpipwrres0 at acpi0: C1F0, resource for C1EC
> > > acpipwrres1 at acpi0: C1FD, resource for C1F1
> > > acpipwrres2 at acpi0: C21A, resource for C218
> > > acpipwrres3 at acpi0: C222, resource for C121
> > > acpipwrres4 at acpi0: C321, resource for C325
> > > acpipwrres5 at acpi0: C322, resource for C326
> > > acpipwrres6 at acpi0: C323, resource for C327
> > > acpipwrres7 at acpi0: C324, resource for C328
> > > acpitz0 at acpi0: critical temperature is 256 degC
> > > acpitz1 at acpi0: critical temperature is 105 degC
> > > acpitz2 at acpi0: critical temperature is 105 degC
> > > acpitz3 at acpi0: critical temperature is 105 degC
> > > acpitz4 at acpi0: critical temperature is 110 degC
> > > "PNP0A06" at acpi0 not configured
> > > "PNP0303" at acpi0 not configured
> > > "SYN0112" at acpi0 not configured
> > > "HPQ0006" at acpi0 not configured
> > > acpibat0 at acpi0: C1BC model "Primary" serial 08083 2016/11/05 type LIon
> > > oem "Hewlett-Packard"
> > > acpibat1 at acpi0: C1BB not present
> > > acpiac0 at acpi0: AC unit online
> > > acpibtn0 at acpi0: C23F
> > > acpibtn1 at acpi0: C238
> > > "PNP0C14" at acpi0 not configured
> > > "PNP0C0B" at acpi0 not configured
> > > "PNP0C0B" at acpi0 not configured
> > > "PNP0C0B" at acpi0 not configured
> > > "PNP0C0B" at acpi0 not configured
> > > acpivideo0 at acpi0: C083
> > > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1800
> > > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> > > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> > > drm0 at inteldrm0
> > > intagp0 at inteldrm0
> > > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > > inteldrm0: apic 1 int 16
> > > inteldrm0: 1024x768, 32bpp
> > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> > > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
> > > azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using
> > > Analog Devices AD1981HD
> > > audio0 at azalia0
> > > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int
> > > 16
> > > pci1 at ppb0 bus 8
> > > bwi0 at pci1 dev 0 function 0 "Broadcom BCM4311" rev 0x01: apic 1 int 16,
> > > address 00:14:a5:f0:fa:2c
> > > ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 1 int
> > > 18
> > > pci2 at ppb1 bus 24
> > > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 1 int
> > > 19
> > > pci3 at ppb2 bus 32
> > > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int
> > > 20
> > > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int
> > > 21
> > > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int
> > > 18
> > > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int
> > > 19
> > > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int
> > > 20
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> > > pci4 at ppb3 bus 2
> > > cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
> > > "TI PCIXX12 FireWire" rev 0x00 at pci4 dev 6 function 1 not configured
> > > bce0 at pci4 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int
> > > 16, address 00:1a:4b:6f:6c:1f
> > > bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> > > cardslot0 at cbb0 slot 0 flags 0
> > > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
> > > pcmcia0 at cardslot0
> > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
> > > disabled
> > > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> > > channel 0 configured to compatibility, channel 1 configured to
> > > compatibility
> > > atapiscsi0 at pciide0 channel 0 drive 0
> > > scsibus1 at atapiscsi0: 2 targets
> > > cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVDRW DVR-K17, 1.05> ATAPI
> > > 5/cdrom removable
> > > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > > pciide0: channel 1 ignored (disabled)
> > > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI
> > > 1.1
> > > ahci0: port 0: 1.5Gb/s
> > > scsibus2 at ahci0: 32 targets
> > > sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3
> > > 0/direct fixed naa.5000cca51eefd39b
> > > sd0: 114473MB, 512 bytes/sector, 234441648 sectors
> > > usb1 at uhci0: USB revision 1.0
> > > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > usb2 at uhci1: USB revision 1.0
> > > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > usb3 at uhci2: USB revision 1.0
> > > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > usb4 at uhci3: USB revision 1.0
> > > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > isa0 at ichpcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pms0 at pckbc0 (aux slot)
> > > wsmouse0 at pms0 mux 0
> > > wsmouse1 at pms0 mux 0
> > > pms0: Synaptics touchpad, firmware 6.2
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > > urndis0 at uhub0 port 3 configuration 1 interface 0 "Android Android" rev
> > > 2.00/3.10 addr 2
> > > urndis0: using RNDIS, address 02:0d:02:5f:33:64
> > > vscsi0 at root
> > > scsibus3 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus4 at softraid0: 256 targets
> > > root on sd0a (8607602cb9fc6ee0.a) swap on sd0b dump on sd0b
> > > WARNING: / was not properly unmounted
> > > uhub1 detached
> > > uhub2 detached
> > > uhub3 detached
> > > uhub4 detached
> > > urndis0 detached
> > > uhub0 detached
> > > uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
> > > 2.00/3.10 addr 2
> > > urndis0: using RNDIS, address 02:0d:02:5f:33:64
> > > uhub0 detached
> > > uhub1 detached
> > > uhub2 detached
> > > uhub3 detached
> > > urndis0 detached
> > > uhub4 detached
> > > uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > > 1.00/1.00 addr 1
> > > uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
> > > 2.00/3.10 addr 2
> > > urndis0: using RNDIS, address 02:0d:02:5f:33:64
> > >
> >
