This is current/i386 on a Compaq nx6310 laptop (dmesg below).
Mostly works, but I experience trouble with suspend/resume.
apmd(8) is running with apmd_flags="-A", but closing the lid does nothing,
eventhough machdep.lidsuspend=1 and machdep.lidaction=1
Trying to suspend manually with Fn+F3 does nothing as well.
Trying to suspend with apm(8)'s options does this:
apm -S says
May 10 16:12:32 hp apmd: system entering standby
May 10 16:12:33 hp /bsd: uhub1 detached
May 10 16:12:33 hp /bsd: uhub2 detached
May 10 16:12:33 hp /bsd: uhub3 detached
and, presumably, goes into standby. The power led is blinking.
It will not resume: pressing the power button makes the power led
light up again, but that's it. Even the display backlight
stays turned off. The machine is not accessible remotely
and needs to be forcefully restarted.
/etc/apm/standby does not get called.
apm -z says
May 10 16:31:26 hp apmd: system suspending
May 10 16:31:28 hp /bsd: uhub1 detached
May 10 16:31:28 hp /bsd: uhub2 detached
May 10 16:31:28 hp /bsd: uhub3 detached
and, presumably, goes to suspend, but never resumes.
The symptoms are the same as with apm -S.
/etc/apm/suspend does not get called.
apm -Z puts the system into hibernation, and it works.
After pressing the power button, the machine boots,
and unhibernates at the end of the boot sequence.
/etc/apm/{hibernate,resume} get called.
How can I help debug this?
http://stare.cz/dmesg/compaq-nx6310.20170509
http://stare.cz/dmesg/compaq-nx6310.acpidump.tar
http://stare.cz/dmesg/compaq-nx6310.pcidump
Jan
OpenBSD 6.1-current (GENERIC) #0: Tue May 9 17:46:04 CEST 2017
h...@hp.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz ("GenuineIntel" 686-class) 1.73
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,SSE3,MWAIT,TM2,xTPR,PDCM,PERF,SENSOR
real mem = 1601519616 (1527MB)
avail mem = 1558122496 (1485MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 04/17/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.4 @
0xf38eb (23 entries)
bios0: vendor Hewlett-Packard version "68YDU Ver. F.0D" date 04/17/2007
bios0: Hewlett-Packard 30AA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT
acpi0: wakeup devices C096(S5) C0F1(S3) C0F8(S3) C0F9(S3) C0FA(S3) C0FB(S3)
C102(S5) C22B(S5) C115(S5) C22C(S5) C118(S5) C22C(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.1.1.1, IBE
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (C096)
acpiprt1 at acpi0: bus 8 (C102)
acpiprt2 at acpi0: bus 24 (C115)
acpiprt3 at acpi0: bus 32 (C118)
acpiprt4 at acpi0: bus 0 (C002)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1 halt)
acpipwrres0 at acpi0: C1F0, resource for C1EC
acpipwrres1 at acpi0: C1FD, resource for C1F1
acpipwrres2 at acpi0: C21A, resource for C218
acpipwrres3 at acpi0: C222, resource for C121
acpipwrres4 at acpi0: C321, resource for C325
acpipwrres5 at acpi0: C322, resource for C326
acpipwrres6 at acpi0: C323, resource for C327
acpipwrres7 at acpi0: C324, resource for C328
acpitz0 at acpi0: critical temperature is 256 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 105 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 110 degC
"PNP0A06" at acpi0 not configured
"PNP0303" at acpi0 not configured
"SYN0112" at acpi0 not configured
"HPQ0006" at acpi0 not configured
acpibat0 at acpi0: C1BC model "Primary" serial 08083 2016/11/05 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: C1BB not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C23F
acpibtn1 at acpi0: C238
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: C083
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 1 int 16
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 16
pci1 at ppb0 bus 8
bwi0 at pci1 dev 0 function 0 "Broadcom BCM4311" rev 0x01: apic 1 int 16,
address 00:14:a5:f0:fa:2c
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 1 int 18
pci2 at ppb1 bus 24
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 1 int 19
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 21
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 6 function 1 not configured
bce0 at pci4 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 16,
address 00:1a:4b:6f:6c:1f
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVDRW DVR-K17, 1.05> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct
fixed naa.5000cca51eefd39b
sd0: 114473MB, 512 bytes/sector, 234441648 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
urndis0 at uhub0 port 3 configuration 1 interface 0 "Android Android" rev
2.00/3.10 addr 2
urndis0: using RNDIS, address 02:0d:02:5f:33:64
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (8607602cb9fc6ee0.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
uhub1 detached
uhub2 detached
uhub3 detached
uhub4 detached
urndis0 detached
uhub0 detached
uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
2.00/3.10 addr 2
urndis0: using RNDIS, address 02:0d:02:5f:33:64
uhub0 detached
uhub1 detached
uhub2 detached
uhub3 detached
urndis0 detached
uhub4 detached
uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
2.00/3.10 addr 2
urndis0: using RNDIS, address 02:0d:02:5f:33:64
