On Wed, May 10, 2017 at 05:19:04PM +0200, Jan Stary wrote:
> This is current/i386 on a Compaq nx6310 laptop (dmesg below).
This machine is notoriously bad. Did this ever work for you?
-ml
> Mostly works, but I experience trouble with suspend/resume.
>
> apmd(8) is running with apmd_flags="-A", but closing the lid does nothing,
> eventhough machdep.lidsuspend=1 and machdep.lidaction=1
> Trying to suspend manually with Fn+F3 does nothing as well.
> Trying to suspend with apm(8)'s options does this:
>
> apm -S says
>
> May 10 16:12:32 hp apmd: system entering standby
> May 10 16:12:33 hp /bsd: uhub1 detached
> May 10 16:12:33 hp /bsd: uhub2 detached
> May 10 16:12:33 hp /bsd: uhub3 detached
>
> and, presumably, goes into standby. The power led is blinking.
> It will not resume: pressing the power button makes the power led
> light up again, but that's it. Even the display backlight
> stays turned off. The machine is not accessible remotely
> and needs to be forcefully restarted.
> /etc/apm/standby does not get called.
>
> apm -z says
>
> May 10 16:31:26 hp apmd: system suspending
> May 10 16:31:28 hp /bsd: uhub1 detached
> May 10 16:31:28 hp /bsd: uhub2 detached
> May 10 16:31:28 hp /bsd: uhub3 detached
>
> and, presumably, goes to suspend, but never resumes.
> The symptoms are the same as with apm -S.
> /etc/apm/suspend does not get called.
>
> apm -Z puts the system into hibernation, and it works.
> After pressing the power button, the machine boots,
> and unhibernates at the end of the boot sequence.
> /etc/apm/{hibernate,resume} get called.
>
> How can I help debug this?
>
> http://stare.cz/dmesg/compaq-nx6310.20170509
> http://stare.cz/dmesg/compaq-nx6310.acpidump.tar
> http://stare.cz/dmesg/compaq-nx6310.pcidump
>
> Jan
>
>
> OpenBSD 6.1-current (GENERIC) #0: Tue May 9 17:46:04 CEST 2017
> h...@hp.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz ("GenuineIntel" 686-class) 1.73
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,SSE3,MWAIT,TM2,xTPR,PDCM,PERF,SENSOR
> real mem = 1601519616 (1527MB)
> avail mem = 1558122496 (1485MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 04/17/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.4 @
> 0xf38eb (23 entries)
> bios0: vendor Hewlett-Packard version "68YDU Ver. F.0D" date 04/17/2007
> bios0: Hewlett-Packard 30AA
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT
> acpi0: wakeup devices C096(S5) C0F1(S3) C0F8(S3) C0F9(S3) C0FA(S3) C0FB(S3)
> C102(S5) C22B(S5) C115(S5) C22C(S5) C118(S5) C22C(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 132MHz
> cpu0: mwait min=64, max=64, C-substates=0.1.1.1, IBE
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiprt0 at acpi0: bus 2 (C096)
> acpiprt1 at acpi0: bus 8 (C102)
> acpiprt2 at acpi0: bus 24 (C115)
> acpiprt3 at acpi0: bus 32 (C118)
> acpiprt4 at acpi0: bus 0 (C002)
> acpiec0 at acpi0
> acpicpu0 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1
> halt)
> acpipwrres0 at acpi0: C1F0, resource for C1EC
> acpipwrres1 at acpi0: C1FD, resource for C1F1
> acpipwrres2 at acpi0: C21A, resource for C218
> acpipwrres3 at acpi0: C222, resource for C121
> acpipwrres4 at acpi0: C321, resource for C325
> acpipwrres5 at acpi0: C322, resource for C326
> acpipwrres6 at acpi0: C323, resource for C327
> acpipwrres7 at acpi0: C324, resource for C328
> acpitz0 at acpi0: critical temperature is 256 degC
> acpitz1 at acpi0: critical temperature is 105 degC
> acpitz2 at acpi0: critical temperature is 105 degC
> acpitz3 at acpi0: critical temperature is 105 degC
> acpitz4 at acpi0: critical temperature is 110 degC
> "PNP0A06" at acpi0 not configured
> "PNP0303" at acpi0 not configured
> "SYN0112" at acpi0 not configured
> "HPQ0006" at acpi0 not configured
> acpibat0 at acpi0: C1BC model "Primary" serial 08083 2016/11/05 type LIon oem
> "Hewlett-Packard"
> acpibat1 at acpi0: C1BB not present
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: C23F
> acpibtn1 at acpi0: C238
> "PNP0C14" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> acpivideo0 at acpi0: C083
> bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1800
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0: apic 1 int 16
> inteldrm0: 1024x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
> azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
> Devices AD1981HD
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 16
> pci1 at ppb0 bus 8
> bwi0 at pci1 dev 0 function 0 "Broadcom BCM4311" rev 0x01: apic 1 int 16,
> address 00:14:a5:f0:fa:2c
> ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 1 int 18
> pci2 at ppb1 bus 24
> ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 1 int 19
> pci3 at ppb2 bus 32
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 21
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> pci4 at ppb3 bus 2
> cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
> "TI PCIXX12 FireWire" rev 0x00 at pci4 dev 6 function 1 not configured
> bce0 at pci4 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 16,
> address 00:1a:4b:6f:6c:1f
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVDRW DVR-K17, 1.05> ATAPI 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
> ahci0: port 0: 1.5Gb/s
> scsibus2 at ahci0: 32 targets
> sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct
> fixed naa.5000cca51eefd39b
> sd0: 114473MB, 512 bytes/sector, 234441648 sectors
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 6.2
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> urndis0 at uhub0 port 3 configuration 1 interface 0 "Android Android" rev
> 2.00/3.10 addr 2
> urndis0: using RNDIS, address 02:0d:02:5f:33:64
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (8607602cb9fc6ee0.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> uhub1 detached
> uhub2 detached
> uhub3 detached
> uhub4 detached
> urndis0 detached
> uhub0 detached
> uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
> 2.00/3.10 addr 2
> urndis0: using RNDIS, address 02:0d:02:5f:33:64
> uhub0 detached
> uhub1 detached
> uhub2 detached
> uhub3 detached
> urndis0 detached
> uhub4 detached
> uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> urndis0 at uhub4 port 3 configuration 1 interface 0 "Android Android" rev
> 2.00/3.10 addr 2
> urndis0: using RNDIS, address 02:0d:02:5f:33:64
>
