hi
so restart with a blank paper ;)
i did an
rm -r /usr/src
then
cd /usr
cvs -qd anon...@ftp5.eu.openbsd.org:/cvs get -P src
cd /usr/src/sys/dev
patch -p1 < /home/glaess/EP80579_debug.diff
then i got some reject
i modify all rejected files by hand ( with the missing lines )
cd /usr/src/sys/arch/i386/conf
config GENERIC
cd ../compile/GENERIC
make depend && make
then i copy the new bsd kernel files to the EP80579 Hardware by scp
and restart them.
holger
# dmesg
OpenBSD 5.7-current (GENERIC) #0: Mon Apr 20 21:16:06 CEST 2015
root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) processor 1.20GHz ("GenuineIntel" 686-class) 1.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF
real mem = 1072041984 (1022MB)
avail mem = 1042243584 (993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev.
2.2 @ 0xf0800 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "ANSA 3020 R01
Jul,2,2009" date 07/06/2009
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5)
PEX3(S5) HUB0(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (EPA1)
acpiprt2 at acpi0: bus -1 (BR10)
acpiprt3 at acpi0: bus -1 (BR11)
acpiprt4 at acpi0: bus -1 (BR12)
acpiprt5 at acpi0: bus -1 (BR13)
acpiprt6 at acpi0: bus -1 (BR14)
acpiprt7 at acpi0: bus 3 (P0P1)
acpiprt8 at acpi0: bus -1 (PEX0)
acpiprt9 at acpi0: bus -1 (PEX1)
acpiprt10 at acpi0: bus -1 (PEX2)
acpiprt11 at acpi0: bus -1 (PEX3)
acpiprt12 at acpi0: bus -1 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 75 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
em_probe: begin
pchb0 at pci0 dev 0 function 0 "Intel EP80579 Host" rev 0x01
em_probe: begin
"Intel EP80579 Memory" rev 0x01 at pci0 dev 0 function 1 not configured
em_probe: begin
"Intel EP80579 EDMA" rev 0x01 at pci0 dev 1 function 0 not configured
em_probe: begin
ppb0 at pci0 dev 2 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int 16
pci1 at ppb0 bus 1
em_probe: begin
em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00em_attach: begin
: msiem_hardware_init: begin
em_check_phy_reset_block
em_setup_linkem_check_phy_reset_block
em_detect_gig_phyPhy ID = 1410cb0
em_setup_copper_linkem_copper_link_mgp_setupem_check_phy_reset_block
em_setup_interface: begin
will ifmedia_init
did ifmedia_init
before if_attach
before ether_ifattach
, address 00:14:b7:00:61:63
em_check_phy_reset_block
em_attach: end
em_probe: begin
ppb1 at pci0 dev 3 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int 16
pci2 at ppb1 bus 2
em_probe: begin
ppb2 at pci0 dev 4 function 0 "Intel EP80579" rev 0x01
pci3 at ppb2 bus 3
em_probe: begin
em1 at pci3 dev 0 function 0 "Intel EP80579 LAN" rev 0x01em_attach: begin
EP80579 ith dev_id 0: apic 2 int 16em_hardware_init: begin
em_check_phy_reset_block
em_setup_linkem_check_phy_reset_block
em_detect_gig_phy
Hardware Initialization Deferred
, address 00:14:b7:00:61:64
em_check_phy_reset_block
em_attach: end
em_probe: begin
em2 at pci3 dev 1 function 0 "Intel EP80579 LAN" rev 0x01em_attach: begin
EP80579 ith dev_id 1: apic 2 int 17em_hardware_init: begin
em_check_phy_reset_block
em_setup_linkem_check_phy_reset_block
em_detect_gig_phy
Hardware Initialization Deferred
, address 00:14:b7:00:61:65
em_check_phy_reset_block
em_attach: end
em_probe: begin
em3 at pci3 dev 2 function 0 "Intel EP80579 LAN" rev 0x01em_attach: begin
EP80579 ith dev_id 2: apic 2 int 18em_hardware_init: begin
em_check_phy_reset_block
em_setup_linkem_check_phy_reset_block
em_detect_gig_phy
Hardware Initialization Deferred
, address 00:14:b7:00:61:66
em_check_phy_reset_block
em_attach: end
em_probe: begin
gcu0 at pci3 dev 3 function 0 "Intel EP80579 GCU" rev 0x01
em_probe: begin
"Intel EP80579 CANbus" rev 0x01 at pci3 dev 4 function 0 not configured
em_probe: begin
"Intel EP80579 CANbus" rev 0x01 at pci3 dev 5 function 0 not configured
em_probe: begin
"Intel EP80579 Serial" rev 0x01 at pci3 dev 6 function 0 not configured
em_probe: begin
"Intel EP80579 1588" rev 0x01 at pci3 dev 7 function 0 not configured
em_probe: begin
"Intel EP80579 LEB" rev 0x01 at pci3 dev 8 function 0 not configured
em_probe: begin
vendor "Intel", unknown product 0x502d (class processor subclass
Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured
em_probe: begin
"Intel EP80579 Reserved" rev 0x01 at pci3 dev 10 function 0 not configured
em_probe: begin
vendor "Intel", unknown product 0x504c (class processor subclass
Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured
em_probe: begin
"Intel EP80579 Reserved" rev 0x01 at pci3 dev 12 function 0 not configured
em_defer_attach
before em_setup_interface
em_setup_interface: begin
will ifmedia_init
did ifmedia_init
before if_attach
before ether_ifattach
before em_update_link_status
before em_setup_link
em_setup_linkem_check_phy_reset_block
em_detect_gig_phyGCU_READ 2 for 0
em1: unable to read phy 0 reg 2
GCU_READ 3 for 0
em1: unable to read phy 0 reg 3
GCU_READ 2 for 0
em1: unable to read phy 0 reg 2
GCU_READ 3 for 0
em1: unable to read phy 0 reg 3
GCU_READ 2 for 0
em1: unable to read phy 0 reg 2
GCU_READ 3 for 0
em1: unable to read phy 0 reg 3
after em_setup_link
em_defer_attach
before em_setup_interface
em_setup_interface: begin
will ifmedia_init
did ifmedia_init
before if_attach
before ether_ifattach
before em_update_link_status
before em_setup_link
em_setup_linkem_check_phy_reset_block
em_detect_gig_phyGCU_READ 2 for 1
GCU_READ 3 for 1
GCU_READ 2 for 1
GCU_READ 3 for 1
GCU_READ 2 for 1
GCU_READ 3 for 1
after em_setup_link
em_defer_attach
before em_setup_interface
em_setup_interface: begin
will ifmedia_init
did ifmedia_init
before if_attach
before ether_ifattach
before em_update_link_status
before em_setup_link
em_setup_linkem_check_phy_reset_block
em_detect_gig_phyGCU_READ 2 for 2
GCU_READ 3 for 2
GCU_READ 2 for 2
GCU_READ 3 for 2
GCU_READ 2 for 2
GCU_READ 3 for 2
after em_setup_link
em_probe: begin
uhci0 at pci0 dev 29 function 0 "Intel EP80579 USB" rev 0x01: apic 2 int 23
em_probe: begin
ehci0 at pci0 dev 29 function 7 "Intel EP80579 USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
em_probe: begin
pcib0 at pci0 dev 31 function 0 "Intel EP80579 LPC" rev 0x01
em_probe: begin
ahci0 at pci0 dev 31 function 2 "Intel EP80579 AHCI" rev 0x01: msi, AHCI 1.1
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK6037GS, DL34> SCSI3
0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
em_probe: begin
ichiic0 at pci0 dev 31 function 3 "Intel EP80579 SMBus" rev 0x01: apic 2
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbc0: using irq 12 for aux slot
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f67e7646a5f64b3f.a) swap on sd0b dump on sd0b
em_media_status: begin
em_media_status: begin
em_init: begin
em_stop: begin
em_check_phy_reset_block
free_transmit_structures: begin
free_receive_structures: begin
em_init: pba=20K
em_hardware_init: begin
em_check_phy_reset_block
em_setup_linkem_check_phy_reset_block
em_detect_gig_phyPhy ID = 1410cb0
em_setup_copper_linkem_copper_link_mgp_setupem_check_phy_reset_block
em_initialize_transmit_unit: begin
Base = 1e98000, Length = 2000
em_initialize_receive_unit: begin
em_media_status: begin
em_media_status: begin
em_media_status: begin
em_media_status: begin
em_media_status: begin
em_media_status: begin
