Hi, was not quite expecting that, new diff is being cooked up, but expect it later this night
greets -- Maciej 'sfires' Swiderski --------------------------------------------------- SysAdm | SecOff | DS14145-RIPE | DS11-6BONE 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 --------------------------------------------------- A mouse is a device used to point at the xterm you want to type in. > On 17 kwi 2015, at 18:45, Holger Glaess <gla...@glaessixs.de <mailto:gla...@glaessixs.de>> wrote: > > hi > > Am 17.04.2015 um 13:28 schrieb Dariusz Swiderski: >> hi >> >> is this only on em1? > yes just em1 >> and can you try plugging each of this port to a switch and see in ifconfig if >> media gets >> negotiated? > i did and no negoation , > ifconfig says no link because the link led is on. > > if i do an "ifconfig em3 up" > > em3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:14:b7:00:61:66 > priority: 0 > media: Ethernet autoselect (1000baseT full-duplex) > status: active > > if i pull the cable > > same result like ahead. > > holger > > > >> >> greets >> -- >> Maciej 'sfires' Swiderski >> --------------------------------------------------- >> SysAdm | SecOff | DS14145-RIPE | DS11-6BONE >> 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 >> --------------------------------------------------- >> A mouse is a device used to point at the xterm you want to type in. >> >>> On 17 kwi 2015, at 13:21, Holger Glaess <gla...@glaessixs.de <mailto:gla...@glaessixs.de>> wrote: >>> >>> hi >>> >>> looks good , but this "unable to read" is coming from >>> not connected port ? >>> >>> Holger >>> >>> >>> # dmesg | grep "^em" >>> em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address >>> 00:14:b7:00:61:63 >>> em1 at pci3 dev 0 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int 16, >>> address 00:14:b7:00:61:64 >>> em2 at pci3 dev 1 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int 17, >>> address 00:14:b7:00:61:65 >>> em3 at pci3 dev 2 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int 18, >>> address 00:14:b7:00:61:66 >>> em1: unable to read phy 0 reg 2 >>> em1: unable to read phy 0 reg 3 >>> em1: unable to read phy 0 reg 2 >>> em1: unable to read phy 0 reg 3 >>> em1: unable to read phy 0 reg 2 >>> em1: unable to read phy 0 reg 3 >>> em1: unable to read phy 0 reg 1 >>> em1: unable to read phy 0 reg 1 >>> em1: unable to read phy 0 reg 1 >>> em1: unable to read phy 0 reg 1 >>> >>> >>> >>>> hi >>>> >>>> please apply attached patch on top of the previous one, build and reboot >>>> :) >>>> >>>> greets >>>> dms >>>> >>>> On Fri, 17 Apr 2015, Holger Glaess wrote: >>>> >>>>> hi >>>>> >>>>> after build and boot the a patched kernel >>>>> i see now the em interface but >>>>> he show an eeprom error. >>>>> >>>>> >>>>> see demsg >>>>> >>>>> Holger >>>>> >>>>> OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015 >>>>> root@DAF.rocki.intern <mailto:root@DAF.rocki.intern>:/usr/src/sys/arch/i386/compile/GENERIC >>>>> cpu0: Genuine Intel(R) processor 1.20GHz ("GenuineIntel" 686-class) 1.21 >>>> GHz >>>>> cpu0: >>>>> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A >>>> CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF >>>>> real mem = 1072041984 (1022MB) >>>>> avail mem = 1042157568 (993MB) >>>>> mpath0 at root >>>>> scsibus0 at mpath0: 256 targets >>>>> mainbus0 at root >>>>> bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev. >>>>> 2.2 >>>>> @ 0xf0800 (39 entries) >>>>> bios0: vendor Phoenix Technologies, LTD version "ANSA 3020 R01 >>>>> Jul,2,2009" date 07/06/2009 >>>>> acpi0 at bios0: rev 0 >>>>> acpi0: sleep states S0 S3 S4 S5 >>>>> acpi0: tables DSDT FACP MCFG APIC >>>>> acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5) >>>>> PEX3(S5) HUB0(S5) PCI0(S5) >>>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits >>>>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>>>> cpu0 at mainbus0: apid 0 (boot processor) >>>>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >>>>> cpu0: apic clock running at 133MHz >>>>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins >>>>> acpiprt0 at acpi0: bus 0 (PCI0) >>>>> acpiprt1 at acpi0: bus 2 (EPA1) >>>>> acpiprt2 at acpi0: bus -1 (BR10) >>>>> acpiprt3 at acpi0: bus -1 (BR11) >>>>> acpiprt4 at acpi0: bus -1 (BR12) >>>>> acpiprt5 at acpi0: bus -1 (BR13) >>>>> acpiprt6 at acpi0: bus -1 (BR14) >>>>> acpiprt7 at acpi0: bus 3 (P0P1) >>>>> acpiprt8 at acpi0: bus -1 (PEX0) >>>>> acpiprt9 at acpi0: bus -1 (PEX1) >>>>> acpiprt10 at acpi0: bus -1 (PEX2) >>>>> acpiprt11 at acpi0: bus -1 (PEX3) >>>>> acpiprt12 at acpi0: bus -1 (HUB0) >>>>> acpicpu0 at acpi0 >>>>> acpitz0 at acpi0: critical temperature is 75 degC >>>>> acpibtn0 at acpi0: PWRB >>>>> bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! >>>>> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >>>>> pchb0 at pci0 dev 0 function 0 "Intel EP80579 Host" rev 0x01 >>>>> "Intel EP80579 Memory" rev 0x01 at pci0 dev 0 function 1 not configured >>>>> "Intel EP80579 EDMA" rev 0x01 at pci0 dev 1 function 0 not configured >>>>> ppb0 at pci0 dev 2 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int >>>>> 16 >>>>> pci1 at ppb0 bus 1 >>>>> em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address >>>>> 00:14:b7:00:61:63 >>>>> ppb1 at pci0 dev 3 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int >>>>> 16 >>>>> pci2 at ppb1 bus 2 >>>>> ppb2 at pci0 dev 4 function 0 "Intel EP80579" rev 0x01 >>>>> pci3 at ppb2 bus 3 >>>>> em1 at pci3 dev 0 function 0 "Intel EP80579 LAN" rev 0x01em1: Unknown >>>>> MAC >>>>> Type >>>>> : apic 2 int 16em1: The EEPROM Checksum Is Not Valid >>>>> em1: Unable to initialize the hardware >>>>> em2 at pci3 dev 1 function 0 "Intel EP80579 LAN" rev 0x01em2: Unknown >>>>> MAC >>>>> Type >>>>> : apic 2 int 17em2: The EEPROM Checksum Is Not Valid >>>>> em2: Unable to initialize the hardware >>>>> em3 at pci3 dev 2 function 0 "Intel EP80579 LAN" rev 0x01em3: Unknown >>>>> MAC >>>>> Type >>>>> : apic 2 int 18em3: The EEPROM Checksum Is Not Valid >>>>> em3: Unable to initialize the hardware >>>>> gcu0 at pci3 dev 3 function 0 "Intel EP80579 GCU" rev 0x01 >>>>> "Intel EP80579 CANbus" rev 0x01 at pci3 dev 4 function 0 not configured >>>>> "Intel EP80579 CANbus" rev 0x01 at pci3 dev 5 function 0 not configured >>>>> "Intel EP80579 Serial" rev 0x01 at pci3 dev 6 function 0 not configured >>>>> "Intel EP80579 1588" rev 0x01 at pci3 dev 7 function 0 not configured >>>>> "Intel EP80579 LEB" rev 0x01 at pci3 dev 8 function 0 not configured >>>>> vendor "Intel", unknown product 0x502d (class processor subclass >>>>> Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured >>>>> "Intel EP80579 Reserved" rev 0x01 at pci3 dev 10 function 0 not >>>>> configured >>>>> vendor "Intel", unknown product 0x504c (class processor subclass >>>>> Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured >>>>> "Intel EP80579 Reserved" rev 0x01 at pci3 dev 12 function 0 not >>>>> configured >>>>> uhci0 at pci0 dev 29 function 0 "Intel EP80579 USB" rev 0x01: apic 2 int >>>>> 23 >>>>> ehci0 at pci0 dev 29 function 7 "Intel EP80579 USB" rev 0x01: apic 2 int >>>>> 23 >>>>> usb0 at ehci0: USB revision 2.0 >>>>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >>>>> pcib0 at pci0 dev 31 function 0 "Intel EP80579 LPC" rev 0x01 >>>>> ahci0 at pci0 dev 31 function 2 "Intel EP80579 AHCI" rev 0x01: msi, AHCI >>>> 1.1 >>>>> scsibus1 at ahci0: 32 targets >>>>> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK6037GS, DL34> SCSI3 >>>>> 0/direct >>>>> fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT >>>>> sd0: 57231MB, 512 bytes/sector, 117210240 sectors >>>>> ichiic0 at pci0 dev 31 function 3 "Intel EP80579 SMBus" rev 0x01: apic 2 >>>>> int 19 >>>>> iic0 at ichiic0 >>>>> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM >>>>> usb1 at uhci0: USB revision 1.0 >>>>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >>>>> isa0 at pcib0 >>>>> isadma0 at isa0 >>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>>>> com0: console >>>>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >>>>> pckbc0 at isa0 port 0x60/5 >>>>> pckbd0 at pckbc0 (kbd slot) >>>>> pckbc0: using irq 1 for kbd slot >>>>> wskbd0 at pckbd0: console keyboard >>>>> pcppi0 at isa0 port 0x61 >>>>> spkr0 at pcppi0 >>>>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >>>>> vscsi0 at root >>>>> scsibus2 at vscsi0: 256 targets >>>>> softraid0 at root >>>>> scsibus3 at softraid0: 256 targets >>>>> root on sd0a (f67e7646a5f64b3f.a) swap on sd0b dump on sd0b >>>>> >>>>>> hi >>>>>> >>>>>> >>>>>> Am 16.04.2015 um 21:16 schrieb Dariusz Swiderski: >>>>>>> hi >>>>>> yes i will do today , i et you know if done. >>>>>> >>>>>> holger >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> can you test the attahced diff? >>>>>>> >>>>>>> greets >>>>>>> dms >>>>>>> >>>>>>> On Thu, 16 Apr 2015, Dariusz Swiderski wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> more noise, iç¥ stupid for not noticing changed pci dev idç´. >>>>>>>> Expect a diff. >>>>>>>> >>>>>>>> greets >>>>>>>> -- >>>>>>>> Maciej 'sfires' Swiderski >>>>>>>> --------------------------------------------------- >>>>>>>> SysAdm | SecOff | DS14145-RIPE | DS11-6BONE >>>>>>>> 193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288 >>>>>>>> --------------------------------------------------- >>>>>>>> A mouse is a device used to point at the xterm you want to type in. >>>>>>>> >>>>>>>>> On 16 kwi 2015, at 21:55, Dariusz Swiderski <sfi...@sfires.net <mailto:sfi...@sfires.net>> >>>>> wrote: >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> Sorry for the noise, fixed in latest builds. #784 works as expected >>>>>>>>> for me >>>>>>>> on same hardware. >>>>>>>>> Sent from my iPhone >>>>>>>>> >>>>>>>>>> On 16 kwi 2015, at 20:31, Holger Glaess <gla...@glaessixs.de <mailto:gla...@glaessixs.de>> >>>>> wrote: >>>>>>>>>>> Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski: >>>>>>>>>>> Hi, >>>>>>>>>>> >>>>>>>>>>> Could you provide output of >>>>>>>>>>> pcidump -v >>>>>>>>>>> >>>>>>>>>>> Sent from my iPhone >>>>>>>>>>> >>>>>>>>>>> On 16 kwi 2015, at 18:59, Holger Glaess <gla...@glaessixs.de <mailto:gla...@glaessixs.de> >>>>>>>>>>> <mailto:gla...@glaessixs.de <mailto:gla...@glaessixs.de>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> hi >>>>>>>>>>>> >>>>>>>>>>>> can help someone ? >>>>>>>>>>>> the 3 other intel ethernet card are also gigabit . >>>>>>>>>>>> >>>>>>>>>>>> holger >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> # dmesg >>>>>>>>>>>> OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015 >>>>>>>>>>>> dera...@i386.openbsd.org <mailto:dera...@i386.openbsd.org> >>>>>>>>>>>> >>>> <mailto:dera...@i386.openbsd.org <mailto:dera...@i386.openbsd.org>>:/usr/src/sys/arch/i386/compile/GENERIC >>>>>>>>>>>> cpu0: Genuine Intel(R) processor 1.20GHz ("GenuineIntel" >>>>> 686-class) >>>>>>>>>>>> 1.21 GHz >>>>>>>>>>>> cpu0: >>>>>>>>>>>> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A >>>>>>>> CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF >>>>>>>>>>>> real mem = 1072041984 (1022MB) >>>>>>>>>>>> avail mem = 1042243584 (993MB) >>>>>>>>>>>> mpath0 at root >>>>>>>>>>>> scsibus0 at mpath0: 256 targets >>>>>>>>>>>> mainbus0 at root >>>>>>>>>>>> bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, >>>>> SMBIOS >>>>>>>>>>>> rev. 2.2 @ 0xf0800 (39 entries) >>>>>>>>>>>> bios0: vendor Phoenix Technologies, LTD version "ANSA 3020 R01 >>>>>>>>>>>> Jul,2,2009" date 07/06/2009 >>>>>>>>>>>> acpi0 at bios0: rev 0 >>>>>>>>>>>> acpi0: sleep states S0 S3 S4 S5 >>>>>>>>>>>> acpi0: tables DSDT FACP MCFG APIC >>>>>>>>>>>> acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) >>>>> PEX2(S5) >>>>>>>>>>>> PEX3(S5) HUB0(S5) PCI0(S5) >>>>>>>>>>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits >>>>>>>>>>>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >>>>>>>>>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>>>>>>>>>>> cpu0 at mainbus0: apid 0 (boot processor) >>>>>>>>>>>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >>>>>>>>>>>> cpu0: apic clock running at 133MHz >>>>>>>>>>>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins >>>>>>>>>>>> acpiprt0 at acpi0: bus 0 (PCI0) >>>>>>>>>>>> acpiprt1 at acpi0: bus 2 (EPA1) >>>>>>>>>>>> acpiprt2 at acpi0: bus -1 (BR10) >>>>>>>>>>>> acpiprt3 at acpi0: bus -1 (BR11) >>>>>>>>>>>> acpiprt4 at acpi0: bus -1 (BR12) >>>>>>>>>>>> acpiprt5 at acpi0: bus -1 (BR13) >>>>>>>>>>>> acpiprt6 at acpi0: bus -1 (BR14) >>>>>>>>>>>> acpiprt7 at acpi0: bus 3 (P0P1) >>>>>>>>>>>> acpiprt8 at acpi0: bus -1 (PEX0) >>>>>>>>>>>> acpiprt9 at acpi0: bus -1 (PEX1) >>>>>>>>>>>> acpiprt10 at acpi0: bus -1 (PEX2) >>>>>>>>>>>> acpiprt11 at acpi0: bus -1 (PEX3) >>>>>>>>>>>> acpiprt12 at acpi0: bus -1 (HUB0) >>>>>>>>>>>> acpicpu0 at acpi0 >>>>>>>>>>>> acpitz0 at acpi0: critical temperature is 75 degC >>>>>>>>>>>> acpibtn0 at acpi0: PWRB >>>>>>>>>>>> bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000! >>>>>>>>>>>> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >>>>>>>>>>>> pchb0 at pci0 dev 0 function 0 "Intel EP80579 Host" rev 0x01 >>>>>>>>>>>> "Intel EP80579 Memory" rev 0x01 at pci0 dev 0 function 1 not >>>>>>>>>>>> configured >>>>>>>>>>>> "Intel EP80579 EDMA" rev 0x01 at pci0 dev 1 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> ppb0 at pci0 dev 2 function 0 "Intel EP80579 PCIE" rev 0x01: >>>>> apic 2 >>>>>>>>>>>> int 16 >>>>>>>>>>>> pci1 at ppb0 bus 1 >>>>>>>>>>>> em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, >>>>> address >>>>>>>>>>>> 00:14:b7:00:61:63 >>>>>>>>>>>> ppb1 at pci0 dev 3 function 0 "Intel EP80579 PCIE" rev 0x01: >>>>> apic 2 >>>>>>>>>>>> int 16 >>>>>>>>>>>> pci2 at ppb1 bus 2 >>>>>>>>>>>> ppb2 at pci0 dev 4 function 0 "Intel EP80579" rev 0x01 >>>>>>>>>>>> pci3 at ppb2 bus 3 >>>>>>>>>>>> vendor "Intel", unknown product 0x5041 (class network subclass >>>>>>>>>>>> ethernet, rev 0x01) at pci3 dev 0 function 0 not configured >>>>>>>>>>>> vendor "Intel", unknown product 0x5045 (class network subclass >>>>>>>>>>>> ethernet, rev 0x01) at pci3 dev 1 function 0 not configured >>>>>>>>>>>> vendor "Intel", unknown product 0x5049 (class network subclass >>>>>>>>>>>> ethernet, rev 0x01) at pci3 dev 2 function 0 not configured >>>>>>>>>>>> gcu0 at pci3 dev 3 function 0 "Intel EP80579 GCU" rev 0x01 >>>>>>>>>>>> "Intel EP80579 CANbus" rev 0x01 at pci3 dev 4 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> "Intel EP80579 CANbus" rev 0x01 at pci3 dev 5 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> "Intel EP80579 Serial" rev 0x01 at pci3 dev 6 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> "Intel EP80579 1588" rev 0x01 at pci3 dev 7 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> "Intel EP80579 LEB" rev 0x01 at pci3 dev 8 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> vendor "Intel", unknown product 0x502d (class processor subclass >>>>>>>>>>>> Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured >>>>>>>>>>>> "Intel EP80579 Reserved" rev 0x01 at pci3 dev 10 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> vendor "Intel", unknown product 0x504c (class processor subclass >>>>>>>>>>>> Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured >>>>>>>>>>>> "Intel EP80579 Reserved" rev 0x01 at pci3 dev 12 function 0 not >>>>>>>>>>>> configured >>>>>>>>>>>> uhci0 at pci0 dev 29 function 0 "Intel EP80579 USB" rev 0x01: >>>>> apic >>>>>>>>>>>> 2 >>>>>>>>>>>> int 23 >>>>>>>>>>>> ehci0 at pci0 dev 29 function 7 "Intel EP80579 USB" rev 0x01: >>>>> apic >>>>>>>>>>>> 2 >>>>>>>>>>>> int 23 >>>>>>>>>>>> usb0 at ehci0: USB revision 2.0 >>>>>>>>>>>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >>>>>>>>>>>> pcib0 at pci0 dev 31 function 0 "Intel EP80579 LPC" rev 0x01 >>>>>>>>>>>> ahci0 at pci0 dev 31 function 2 "Intel EP80579 AHCI" rev 0x01: >>>>> msi, >>>>>>>>>>>> AHCI 1.1 >>>>>>>>>>>> ahci0: port 0: 3.0Gb/s >>>>>>>>>>>> scsibus1 at ahci0: 32 targets >>>>>>>>>>>> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK6037GS, DL34> >>>>> SCSI3 >>>>>>>>>>>> 0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT >>>>>>>>>>>> sd0: 57231MB, 512 bytes/sector, 117210240 sectors >>>>>>>>>>>> ichiic0 at pci0 dev 31 function 3 "Intel EP80579 SMBus" rev >>>>> 0x01: >>>>>>>>>>>> apic 2 int 19 >>>>>>>>>>>> iic0 at ichiic0 >>>>>>>>>>>> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 >>>>>>>>>>>> SO-DIMM >>>>>>>>>>>> usb1 at uhci0: USB revision 1.0 >>>>>>>>>>>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >>>>>>>>>>>> isa0 at pcib0 >>>>>>>>>>>> isadma0 at isa0 >>>>>>>>>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >>>>>>>>>>>> com0: console >>>>>>>>>>>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >>>>>>>>>>>> pckbc0 at isa0 port 0x60/5 >>>>>>>>>>>> pckbc0: using irq 12 for aux slot >>>>>>>>>>>> pckbd0 at pckbc0 (kbd slot) >>>>>>>>>>>> pckbc0: using irq 1 for kbd slot >>>>>>>>>>>> wskbd0 at pckbd0: console keyboard >>>>>>>>>>>> pcppi0 at isa0 port 0x61 >>>>>>>>>>>> spkr0 at pcppi0 >>>>>>>>>>>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >>>>>>>>>>>> vscsi0 at root >>>>>>>>>>>> scsibus2 at vscsi0: 256 targets >>>>>>>>>>>> softraid0 at root >>>>>>>>>>>> scsibus3 at softraid0: 256 targets >>>>>>>>>>>> root on sd0a (f67e7646a5f64b3f.a) swap on sd0b dump on sd0b >>>>>>>>>> hi >>>>>>>>>> >>>>>>>>>> shure >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> # pcidump -v >>>>>>>>>> Domain /dev/pci0: >>>>>>>>>> 0:0:0: Intel EP80579 Host >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5020 >>>>>>>>>> 0x0004: Command: 0006 Status: 2010 >>>>>>>>>> 0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR empty (00000000) >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5020 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x0040: Capability 0x09: Vendor Specific >>>>>>>>>> 0:0:1: Intel EP80579 Memory >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5021 >>>>>>>>>> 0x0004: Command: 0000 Status: 0000 >>>>>>>>>> 0x0008: Class: ff Subclass: 00 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR empty (00000000) >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5021 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0:1:0: Intel EP80579 EDMA >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5023 >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xfdfff000/0x00001000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5023 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00b0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 0:2:0: Intel EP80579 PCIE >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5024 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 10 >>>>>>>>>> 0x0010: 00000000 >>>>>>>>>> 0x0014: 00000000 >>>>>>>>>> 0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1 >>>>>>>>>> Secondary Latency Timer: 00 >>>>>>>>>> 0x001c: I/O Base: c0 I/O Limit: c0 Secondary Status: 0000 >>>>>>>>>> 0x0020: Memory Base: fda0 Memory Limit: fda0 >>>>>>>>>> 0x0024: Prefetch Memory Base: fde1 Prefetch Memory Limit: >>>>>>>>>> fde1 >>>>>>>>>> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 >>>>>>>>>> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 >>>>>>>>>> 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 >>>>> Bits: >>>>>>>>>> 0000 >>>>>>>>>> 0x0038: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Bridge Control: 0000 >>>>>>>>>> 0x0050: Capability 0x01: Power Management >>>>>>>>>> 0x0058: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 0x0064: Capability 0x10: PCI Express >>>>>>>>>> Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x8 >>>>>>>>>> 0:3:0: Intel EP80579 PCIE >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5025 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 10 >>>>>>>>>> 0x0010: 00000000 >>>>>>>>>> 0x0014: 00000000 >>>>>>>>>> 0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2 >>>>>>>>>> Secondary Latency Timer: 00 >>>>>>>>>> 0x001c: I/O Base: e0 I/O Limit: e0 Secondary Status: 2000 >>>>>>>>>> 0x0020: Memory Base: fdd0 Memory Limit: fdd0 >>>>>>>>>> 0x0024: Prefetch Memory Base: fdc1 Prefetch Memory Limit: >>>>>>>>>> fdc1 >>>>>>>>>> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 >>>>>>>>>> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 >>>>>>>>>> 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 >>>>> Bits: >>>>>>>>>> 0000 >>>>>>>>>> 0x0038: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Bridge Control: 0000 >>>>>>>>>> 0x0050: Capability 0x01: Power Management >>>>>>>>>> 0x0058: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 0x0064: Capability 0x10: PCI Express >>>>>>>>>> Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x4 >>>>>>>>>> 0:4:0: Intel EP80579 >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5037 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: 00000000 >>>>>>>>>> 0x0014: 00000000 >>>>>>>>>> 0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3 >>>>>>>>>> Secondary Latency Timer: 00 >>>>>>>>>> 0x001c: I/O Base: d0 I/O Limit: d0 Secondary Status: 0000 >>>>>>>>>> 0x0020: Memory Base: c000 Memory Limit: dff0 >>>>>>>>>> 0x0024: Prefetch Memory Base: fdb1 Prefetch Memory Limit: >>>>>>>>>> fdb1 >>>>>>>>>> 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 >>>>>>>>>> 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 >>>>>>>>>> 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 >>>>> Bits: >>>>>>>>>> 0000 >>>>>>>>>> 0x0038: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 00 Bridge Control: 0000 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0:29:0: Intel EP80579 USB >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5033 >>>>>>>>>> 0x0004: Command: 0005 Status: 0280 >>>>>>>>>> 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR empty (00000000) >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR io addr: 0x0000ff00/0x0020 >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5033 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0:29:7: Intel EP80579 USB >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5035 >>>>>>>>>> 0x0004: Command: 0006 Status: 0290 >>>>>>>>>> 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xfdffb000/0x00000400 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5035 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x0050: Capability 0x01: Power Management >>>>>>>>>> 0:31:0: Intel EP80579 LPC >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5031 >>>>>>>>>> 0x0004: Command: 0007 Status: 0200 >>>>>>>>>> 0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR empty (00000000) >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5031 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0:31:2: Intel EP80579 AHCI >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5029 >>>>>>>>>> 0x0004: Command: 0007 Status: 02b0 >>>>>>>>>> 0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR io addr: 0x0000fe00/0x0008 >>>>>>>>>> 0x0014: BAR io addr: 0x0000fd00/0x0004 >>>>>>>>>> 0x0018: BAR io addr: 0x0000fc00/0x0008 >>>>>>>>>> 0x001c: BAR io addr: 0x0000fb00/0x0004 >>>>>>>>>> 0x0020: BAR io addr: 0x0000fa00/0x0020 >>>>>>>>>> 0x0024: BAR mem 32bit addr: 0xfdffa000/0x00000400 >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5028 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 02 Line: ff Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 0x0070: Capability 0x01: Power Management >>>>>>>>>> 0x00a8: Capability 0x12: SATA >>>>>>>>>> 0:31:3: Intel EP80579 SMBus >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5032 >>>>>>>>>> 0x0004: Command: 0001 Status: 0280 >>>>>>>>>> 0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR empty (00000000) >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR io addr: 0x00000500/0x0020 >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 5032 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 02 Line: ff Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 1:0:0: Intel 82574L >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 10d3 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 00 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 10 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xfdac0000/0x00020000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR io addr: 0x0000cf00/0x0020 >>>>>>>>>> 0x001c: BAR mem 32bit addr: 0xfdafc000/0x00004000 >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00c8: Capability 0x01: Power Management >>>>>>>>>> 0x00d0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 0x00e0: Capability 0x10: PCI Express >>>>>>>>>> Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1 >>>>>>>>>> 0x00a0: Capability 0x11: Extended Message Signaled >>>>> Interrupts >>>>>>>>>> (MSI-X) >>>>>>>>>> 3:0:0: Intel unknown >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5041 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdffc0000/0x00020000 >>>>>>>>>> 0x0014: BAR io addr: 0x0000df00/0x0020 >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:1:0: Intel unknown >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5045 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdffa0000/0x00020000 >>>>>>>>>> 0x0014: BAR io addr: 0x0000de00/0x0020 >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:2:0: Intel unknown >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5049 >>>>>>>>>> 0x0004: Command: 0007 Status: 0010 >>>>>>>>>> 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdff80000/0x00020000 >>>>>>>>>> 0x0014: BAR io addr: 0x0000dd00/0x0020 >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:3:0: Intel EP80579 GCU >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 503e >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: ff Subclass: 00 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdffff000/0x00001000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 3:4:0: Intel EP80579 CANbus >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5039 >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 0c Subclass: 09 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfffe000/0x00001000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:5:0: Intel EP80579 CANbus >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 503a >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 0c Subclass: 09 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfffd000/0x00001000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:6:0: Intel EP80579 Serial >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 503b >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfffc000/0x00001000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:7:0: Intel EP80579 1588 >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 503c >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 11 Subclass: 10 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfffb000/0x00001000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:8:0: Intel EP80579 LEB >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 503d >>>>>>>>>> 0x0004: Command: 0006 Status: 0010 >>>>>>>>>> 0x0008: Class: 06 Subclass: 80 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfffa000/0x00001000 >>>>>>>>>> 0x0014: BAR mem 32bit addr: 0xc0000000/0x10000000 >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:9:0: Intel unknown >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 502d >>>>>>>>>> 0x0004: Command: 0006 Status: 0010 >>>>>>>>>> 0x0008: Class: 0b Subclass: 40 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfff4000/0x00002000 >>>>>>>>>> 0x0014: BAR mem 32bit addr: 0xdffec000/0x00004000 >>>>>>>>>> 0x0018: BAR mem 32bit addr: 0xdffe4000/0x00004000 >>>>>>>>>> 0x001c: BAR mem 32bit addr: 0xdfff9000/0x00001000 >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:10:0: Intel EP80579 Reserved >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 503f >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdffe8000/0x00004000 >>>>>>>>>> 0x0014: BAR mem 32bit addr: 0xdfff8000/0x00001000 >>>>>>>>>> 0x0018: BAR mem 32bit addr: 0xdff40000/0x00040000 >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:11:0: Intel unknown >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 504c >>>>>>>>>> 0x0004: Command: 0006 Status: 0010 >>>>>>>>>> 0x0008: Class: 0b Subclass: 40 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfff7000/0x00001000 >>>>>>>>>> 0x0014: BAR mem 32bit addr: 0xdfff6000/0x00001000 >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 07 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> 3:12:0: Intel EP80579 Reserved >>>>>>>>>> 0x0000: Vendor ID: 8086 Product ID: 5030 >>>>>>>>>> 0x0004: Command: 0002 Status: 0010 >>>>>>>>>> 0x0008: Class: 11 Subclass: 01 Interface: 00 Revision: 01 >>>>>>>>>> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache >>>>> Line >>>>>>>>>> Size: 00 >>>>>>>>>> 0x0010: BAR mem 32bit addr: 0xdfff2000/0x00002000 >>>>>>>>>> 0x0014: BAR empty (00000000) >>>>>>>>>> 0x0018: BAR empty (00000000) >>>>>>>>>> 0x001c: BAR empty (00000000) >>>>>>>>>> 0x0020: BAR empty (00000000) >>>>>>>>>> 0x0024: BAR empty (00000000) >>>>>>>>>> 0x0028: Cardbus CIS: 00000000 >>>>>>>>>> 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 >>>>>>>>>> 0x0030: Expansion ROM Base Address: 00000000 >>>>>>>>>> 0x0038: 00000000 >>>>>>>>>> 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 >>>>>>>>>> 0x00dc: Capability 0x01: Power Management >>>>>>>>>> 0x00e4: Capability 0x09: Vendor Specific >>>>>>>>>> 0x00f0: Capability 0x05: Message Signaled Interrupts (MSI) >>>>>>>>>> >>>>>>>>>> holger >>>>>>>> [demime 1.01d removed an attachment of type >>>>> application/pgp-signature >>>>>>>> which had a name of signature.asc] >>>> Index: dev/pci/if_em_hw.c >>>> >>>> =================================================================== >>>> >>>> RCS file: /cvs/src/sys/dev/pci/if_em_hw.c,v >>>> >>>> retrieving revision 1.83 >>>> >>>> diff -u -p -r1.83 if_em_hw.c >>>> >>>> --- dev/pci/if_em_hw.c 14 Mar 2015 03:38:48 -0000 1.83 >>>> >>>> +++ dev/pci/if_em_hw.c 17 Apr 2015 09:34:07 -0000 >>>> >>>> @@ -602,14 +602,17 @@ em_set_mac_type(struct em_hw *hw) >>>> >>>> hw->mac_type = em_pch_lpt; >>>> >>>> break; >>>> >>>> case E1000_DEV_ID_EP80579_LAN_1: >>>> >>>> + case E1000_DEV_ID_EP80579_LAN_4: >>>> >>>> hw->mac_type = em_icp_xxxx; >>>> >>>> hw->icp_xxxx_port_num = 0; >>>> >>>> break; >>>> >>>> case E1000_DEV_ID_EP80579_LAN_2: >>>> >>>> + case E1000_DEV_ID_EP80579_LAN_5: >>>> >>>> hw->mac_type = em_icp_xxxx; >>>> >>>> hw->icp_xxxx_port_num = 1; >>>> >>>> break; >>>> >>>> case E1000_DEV_ID_EP80579_LAN_3: >>>> >>>> + case E1000_DEV_ID_EP80579_LAN_6: >>>> >>>> hw->mac_type = em_icp_xxxx; >>>> >>>> hw->icp_xxxx_port_num = 2; >>>> >>>> break; >>>> >>>> @@ -704,6 +707,9 @@ em_set_media_type(struct em_hw *hw) >>>> >>>> case E1000_DEV_ID_EP80579_LAN_1: >>>> >>>> case E1000_DEV_ID_EP80579_LAN_2: >>>> >>>> case E1000_DEV_ID_EP80579_LAN_3: >>>> >>>> + case E1000_DEV_ID_EP80579_LAN_4: >>>> >>>> + case E1000_DEV_ID_EP80579_LAN_5: >>>> >>>> + case E1000_DEV_ID_EP80579_LAN_6: >>>> >>>> hw->media_type = em_media_type_oem; >>>> >>>> break; >>>> >>>> default: >>>> >>>> Index: dev/pci/if_em_hw.h >>>> >>>> =================================================================== >>>> >>>> RCS file: /cvs/src/sys/dev/pci/if_em_hw.h,v >>>> >>>> retrieving revision 1.63 >>>> >>>> diff -u -p -r1.63 if_em_hw.h >>>> >>>> --- dev/pci/if_em_hw.h 1 Apr 2015 18:49:32 -0000 1.63 >>>> >>>> +++ dev/pci/if_em_hw.h 17 Apr 2015 09:34:08 -0000 >>>> >>>> @@ -594,6 +594,9 @@ int32_t em_check_phy_reset_block(struct >>>> >>>> #define E1000_DEV_ID_EP80579_LAN_1 0x5040 >>>> >>>> #define E1000_DEV_ID_EP80579_LAN_2 0x5044 >>>> >>>> #define E1000_DEV_ID_EP80579_LAN_3 0x5048 >>>> >>>> +#define E1000_DEV_ID_EP80579_LAN_4 0x5041 >>>> >>>> +#define E1000_DEV_ID_EP80579_LAN_5 0x5045 >>>> >>>> +#define E1000_DEV_ID_EP80579_LAN_6 0x5049 >>>> >>>> >>>> >>>> #define NODE_ADDRESS_SIZE 6 >>>> >>>> #define ETH_LENGTH_OF_ADDRESS 6 >> [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]
