hi
Am 17.04.2015 um 13:28 schrieb Dariusz Swiderski:
hi
is this only on em1?
yes just em1
and can you try plugging each of this port to a switch and see in ifconfig if
media gets
negotiated?
i did and no negoation ,
ifconfig says no link because the link led is on.
if i do an "ifconfig em3 up"
em3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:b7:00:61:66
priority: 0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
if i pull the cable
same result like ahead.
holger
greets
--
Maciej 'sfires' Swiderski
---------------------------------------------------
SysAdm | SecOff | DS14145-RIPE | DS11-6BONE
193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288
---------------------------------------------------
A mouse is a device used to point at the xterm you want to type in.
On 17 kwi 2015, at 13:21, Holger Glaess <gla...@glaessixs.de> wrote:
hi
looks good , but this "unable to read" is coming from
not connected port ?
Holger
# dmesg | grep "^em"
em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:14:b7:00:61:63
em1 at pci3 dev 0 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int 16,
address 00:14:b7:00:61:64
em2 at pci3 dev 1 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int 17,
address 00:14:b7:00:61:65
em3 at pci3 dev 2 function 0 "Intel EP80579 LAN" rev 0x01: apic 2 int 18,
address 00:14:b7:00:61:66
em1: unable to read phy 0 reg 2
em1: unable to read phy 0 reg 3
em1: unable to read phy 0 reg 2
em1: unable to read phy 0 reg 3
em1: unable to read phy 0 reg 2
em1: unable to read phy 0 reg 3
em1: unable to read phy 0 reg 1
em1: unable to read phy 0 reg 1
em1: unable to read phy 0 reg 1
em1: unable to read phy 0 reg 1
hi
please apply attached patch on top of the previous one, build and reboot
:)
greets
dms
On Fri, 17 Apr 2015, Holger Glaess wrote:
hi
after build and boot the a patched kernel
i see now the em interface but
he show an eeprom error.
see demsg
Holger
OpenBSD 5.7-stable (GENERIC) #10: Fri Apr 17 10:48:45 CEST 2015
root@DAF.rocki.intern:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) processor 1.20GHz ("GenuineIntel" 686-class) 1.21
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF
real mem = 1072041984 (1022MB)
avail mem = 1042157568 (993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530, SMBIOS rev.
2.2
@ 0xf0800 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "ANSA 3020 R01
Jul,2,2009" date 07/06/2009
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5) PEX2(S5)
PEX3(S5) HUB0(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (EPA1)
acpiprt2 at acpi0: bus -1 (BR10)
acpiprt3 at acpi0: bus -1 (BR11)
acpiprt4 at acpi0: bus -1 (BR12)
acpiprt5 at acpi0: bus -1 (BR13)
acpiprt6 at acpi0: bus -1 (BR14)
acpiprt7 at acpi0: bus 3 (P0P1)
acpiprt8 at acpi0: bus -1 (PEX0)
acpiprt9 at acpi0: bus -1 (PEX1)
acpiprt10 at acpi0: bus -1 (PEX2)
acpiprt11 at acpi0: bus -1 (PEX3)
acpiprt12 at acpi0: bus -1 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 75 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel EP80579 Host" rev 0x01
"Intel EP80579 Memory" rev 0x01 at pci0 dev 0 function 1 not configured
"Intel EP80579 EDMA" rev 0x01 at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int
16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:14:b7:00:61:63
ppb1 at pci0 dev 3 function 0 "Intel EP80579 PCIE" rev 0x01: apic 2 int
16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 4 function 0 "Intel EP80579" rev 0x01
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel EP80579 LAN" rev 0x01em1: Unknown
MAC
Type
: apic 2 int 16em1: The EEPROM Checksum Is Not Valid
em1: Unable to initialize the hardware
em2 at pci3 dev 1 function 0 "Intel EP80579 LAN" rev 0x01em2: Unknown
MAC
Type
: apic 2 int 17em2: The EEPROM Checksum Is Not Valid
em2: Unable to initialize the hardware
em3 at pci3 dev 2 function 0 "Intel EP80579 LAN" rev 0x01em3: Unknown
MAC
Type
: apic 2 int 18em3: The EEPROM Checksum Is Not Valid
em3: Unable to initialize the hardware
gcu0 at pci3 dev 3 function 0 "Intel EP80579 GCU" rev 0x01
"Intel EP80579 CANbus" rev 0x01 at pci3 dev 4 function 0 not configured
"Intel EP80579 CANbus" rev 0x01 at pci3 dev 5 function 0 not configured
"Intel EP80579 Serial" rev 0x01 at pci3 dev 6 function 0 not configured
"Intel EP80579 1588" rev 0x01 at pci3 dev 7 function 0 not configured
"Intel EP80579 LEB" rev 0x01 at pci3 dev 8 function 0 not configured
vendor "Intel", unknown product 0x502d (class processor subclass
Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured
"Intel EP80579 Reserved" rev 0x01 at pci3 dev 10 function 0 not
configured
vendor "Intel", unknown product 0x504c (class processor subclass
Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured
"Intel EP80579 Reserved" rev 0x01 at pci3 dev 12 function 0 not
configured
uhci0 at pci0 dev 29 function 0 "Intel EP80579 USB" rev 0x01: apic 2 int
23
ehci0 at pci0 dev 29 function 7 "Intel EP80579 USB" rev 0x01: apic 2 int
23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel EP80579 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel EP80579 AHCI" rev 0x01: msi, AHCI
1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK6037GS, DL34> SCSI3
0/direct
fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
ichiic0 at pci0 dev 31 function 3 "Intel EP80579 SMBus" rev 0x01: apic 2
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f67e7646a5f64b3f.a) swap on sd0b dump on sd0b
hi
Am 16.04.2015 um 21:16 schrieb Dariusz Swiderski:
hi
yes i will do today , i et you know if done.
holger
Hi,
can you test the attahced diff?
greets
dms
On Thu, 16 Apr 2015, Dariusz Swiderski wrote:
Hi,
more noise, i知 stupid for not noticing changed pci dev id痴.
Expect a diff.
greets
--
Maciej 'sfires' Swiderski
---------------------------------------------------
SysAdm | SecOff | DS14145-RIPE | DS11-6BONE
193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288
---------------------------------------------------
A mouse is a device used to point at the xterm you want to type in.
On 16 kwi 2015, at 21:55, Dariusz Swiderski <sfi...@sfires.net>
wrote:
Hi,
Sorry for the noise, fixed in latest builds. #784 works as expected
for me
on same hardware.
Sent from my iPhone
On 16 kwi 2015, at 20:31, Holger Glaess <gla...@glaessixs.de>
wrote:
Am 16.04.2015 um 20:21 schrieb Dariusz Swiderski:
Hi,
Could you provide output of
pcidump -v
Sent from my iPhone
On 16 kwi 2015, at 18:59, Holger Glaess <gla...@glaessixs.de
<mailto:gla...@glaessixs.de>> wrote:
hi
can help someone ?
the 3 other intel ethernet card are also gigabit .
holger
# dmesg
OpenBSD 5.7-current (GENERIC) #759: Wed Apr 1 14:25:18 MDT 2015
dera...@i386.openbsd.org
<mailto:dera...@i386.openbsd.org>:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) processor 1.20GHz ("GenuineIntel"
686-class)
1.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
CPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF
real mem = 1072041984 (1022MB)
avail mem = 1042243584 (993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/06/09, BIOS32 rev. 0 @ 0xfa530,
SMBIOS
rev. 2.2 @ 0xf0800 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "ANSA 3020 R01
Jul,2,2009" date 07/06/2009
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices EPA0(S3) EPA1(S3) PEX0(S5) PEX1(S5)
PEX2(S5)
PEX3(S5) HUB0(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (EPA1)
acpiprt2 at acpi0: bus -1 (BR10)
acpiprt3 at acpi0: bus -1 (BR11)
acpiprt4 at acpi0: bus -1 (BR12)
acpiprt5 at acpi0: bus -1 (BR13)
acpiprt6 at acpi0: bus -1 (BR14)
acpiprt7 at acpi0: bus 3 (P0P1)
acpiprt8 at acpi0: bus -1 (PEX0)
acpiprt9 at acpi0: bus -1 (PEX1)
acpiprt10 at acpi0: bus -1 (PEX2)
acpiprt11 at acpi0: bus -1 (PEX3)
acpiprt12 at acpi0: bus -1 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 75 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc8000/0x4000! 0xcc000/0x2200! 0xef000/0x1000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel EP80579 Host" rev 0x01
"Intel EP80579 Memory" rev 0x01 at pci0 dev 0 function 1 not
configured
"Intel EP80579 EDMA" rev 0x01 at pci0 dev 1 function 0 not
configured
ppb0 at pci0 dev 2 function 0 "Intel EP80579 PCIE" rev 0x01:
apic 2
int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi,
address
00:14:b7:00:61:63
ppb1 at pci0 dev 3 function 0 "Intel EP80579 PCIE" rev 0x01:
apic 2
int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 4 function 0 "Intel EP80579" rev 0x01
pci3 at ppb2 bus 3
vendor "Intel", unknown product 0x5041 (class network subclass
ethernet, rev 0x01) at pci3 dev 0 function 0 not configured
vendor "Intel", unknown product 0x5045 (class network subclass
ethernet, rev 0x01) at pci3 dev 1 function 0 not configured
vendor "Intel", unknown product 0x5049 (class network subclass
ethernet, rev 0x01) at pci3 dev 2 function 0 not configured
gcu0 at pci3 dev 3 function 0 "Intel EP80579 GCU" rev 0x01
"Intel EP80579 CANbus" rev 0x01 at pci3 dev 4 function 0 not
configured
"Intel EP80579 CANbus" rev 0x01 at pci3 dev 5 function 0 not
configured
"Intel EP80579 Serial" rev 0x01 at pci3 dev 6 function 0 not
configured
"Intel EP80579 1588" rev 0x01 at pci3 dev 7 function 0 not
configured
"Intel EP80579 LEB" rev 0x01 at pci3 dev 8 function 0 not
configured
vendor "Intel", unknown product 0x502d (class processor subclass
Co-processor, rev 0x01) at pci3 dev 9 function 0 not configured
"Intel EP80579 Reserved" rev 0x01 at pci3 dev 10 function 0 not
configured
vendor "Intel", unknown product 0x504c (class processor subclass
Co-processor, rev 0x01) at pci3 dev 11 function 0 not configured
"Intel EP80579 Reserved" rev 0x01 at pci3 dev 12 function 0 not
configured
uhci0 at pci0 dev 29 function 0 "Intel EP80579 USB" rev 0x01:
apic
2
int 23
ehci0 at pci0 dev 29 function 7 "Intel EP80579 USB" rev 0x01:
apic
2
int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel EP80579 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel EP80579 AHCI" rev 0x01:
msi,
AHCI 1.1
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK6037GS, DL34>
SCSI3
0/direct fixed t10.ATA_TOSHIBA_MK6037GSX_676FTD3DT
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
ichiic0 at pci0 dev 31 function 3 "Intel EP80579 SMBus" rev
0x01:
apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbc0: using irq 12 for aux slot
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f67e7646a5f64b3f.a) swap on sd0b dump on sd0b
hi
shure
# pcidump -v
Domain /dev/pci0:
0:0:0: Intel EP80579 Host
0x0000: Vendor ID: 8086 Product ID: 5020
0x0004: Command: 0006 Status: 2010
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5020
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x09: Vendor Specific
0:0:1: Intel EP80579 Memory
0x0000: Vendor ID: 8086 Product ID: 5021
0x0004: Command: 0000 Status: 0000
0x0008: Class: ff Subclass: 00 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5021
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:1:0: Intel EP80579 EDMA
0x0000: Vendor ID: 8086 Product ID: 5023
0x0004: Command: 0002 Status: 0010
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xfdfff000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5023
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00b0: Capability 0x05: Message Signaled Interrupts (MSI)
0:2:0: Intel EP80579 PCIE
0x0000: Vendor ID: 8086 Product ID: 5024
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache
Line
Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
Secondary Latency Timer: 00
0x001c: I/O Base: c0 I/O Limit: c0 Secondary Status: 0000
0x0020: Memory Base: fda0 Memory Limit: fda0
0x0024: Prefetch Memory Base: fde1 Prefetch Memory Limit:
fde1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16
Bits:
0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Bridge Control: 0000
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x05: Message Signaled Interrupts (MSI)
0x0064: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x8
0:3:0: Intel EP80579 PCIE
0x0000: Vendor ID: 8086 Product ID: 5025
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache
Line
Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 00
0x001c: I/O Base: e0 I/O Limit: e0 Secondary Status: 2000
0x0020: Memory Base: fdd0 Memory Limit: fdd0
0x0024: Prefetch Memory Base: fdc1 Prefetch Memory Limit:
fdc1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16
Bits:
0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Bridge Control: 0000
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x05: Message Signaled Interrupts (MSI)
0x0064: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x4
0:4:0: Intel EP80579
0x0000: Vendor ID: 8086 Product ID: 5037
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache
Line
Size: 00
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
Secondary Latency Timer: 00
0x001c: I/O Base: d0 I/O Limit: d0 Secondary Status: 0000
0x0020: Memory Base: c000 Memory Limit: dff0
0x0024: Prefetch Memory Base: fdb1 Prefetch Memory Limit:
fdb1
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16
Bits:
0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 00 Bridge Control: 0000
0x00dc: Capability 0x01: Power Management
0:29:0: Intel EP80579 USB
0x0000: Vendor ID: 8086 Product ID: 5033
0x0004: Command: 0005 Status: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000ff00/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5033
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00
0:29:7: Intel EP80579 USB
0x0000: Vendor ID: 8086 Product ID: 5035
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xfdffb000/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5035
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0:31:0: Intel EP80579 LPC
0x0000: Vendor ID: 8086 Product ID: 5031
0x0004: Command: 0007 Status: 0200
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5031
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:31:2: Intel EP80579 AHCI
0x0000: Vendor ID: 8086 Product ID: 5029
0x0004: Command: 0007 Status: 02b0
0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR io addr: 0x0000fe00/0x0008
0x0014: BAR io addr: 0x0000fd00/0x0004
0x0018: BAR io addr: 0x0000fc00/0x0008
0x001c: BAR io addr: 0x0000fb00/0x0004
0x0020: BAR io addr: 0x0000fa00/0x0020
0x0024: BAR mem 32bit addr: 0xfdffa000/0x00000400
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5028
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x01: Power Management
0x00a8: Capability 0x12: SATA
0:31:3: Intel EP80579 SMBus
0x0000: Vendor ID: 8086 Product ID: 5032
0x0004: Command: 0001 Status: 0280
0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00000500/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 5032
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: ff Min Gnt: 00 Max Lat: 00
1:0:0: Intel 82574L
0x0000: Vendor ID: 8086 Product ID: 10d3
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 10
0x0010: BAR mem 32bit addr: 0xfdac0000/0x00020000
0x0014: BAR empty (00000000)
0x0018: BAR io addr: 0x0000cf00/0x0020
0x001c: BAR mem 32bit addr: 0xfdafc000/0x00004000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
0x00e0: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
0x00a0: Capability 0x11: Extended Message Signaled
Interrupts
(MSI-X)
3:0:0: Intel unknown
0x0000: Vendor ID: 8086 Product ID: 5041
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdffc0000/0x00020000
0x0014: BAR io addr: 0x0000df00/0x0020
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:1:0: Intel unknown
0x0000: Vendor ID: 8086 Product ID: 5045
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdffa0000/0x00020000
0x0014: BAR io addr: 0x0000de00/0x0020
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:2:0: Intel unknown
0x0000: Vendor ID: 8086 Product ID: 5049
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdff80000/0x00020000
0x0014: BAR io addr: 0x0000dd00/0x0020
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:3:0: Intel EP80579 GCU
0x0000: Vendor ID: 8086 Product ID: 503e
0x0004: Command: 0002 Status: 0010
0x0008: Class: ff Subclass: 00 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdffff000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
3:4:0: Intel EP80579 CANbus
0x0000: Vendor ID: 8086 Product ID: 5039
0x0004: Command: 0002 Status: 0010
0x0008: Class: 0c Subclass: 09 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfffe000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:5:0: Intel EP80579 CANbus
0x0000: Vendor ID: 8086 Product ID: 503a
0x0004: Command: 0002 Status: 0010
0x0008: Class: 0c Subclass: 09 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfffd000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:6:0: Intel EP80579 Serial
0x0000: Vendor ID: 8086 Product ID: 503b
0x0004: Command: 0002 Status: 0010
0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfffc000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:7:0: Intel EP80579 1588
0x0000: Vendor ID: 8086 Product ID: 503c
0x0004: Command: 0002 Status: 0010
0x0008: Class: 11 Subclass: 10 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfffb000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:8:0: Intel EP80579 LEB
0x0000: Vendor ID: 8086 Product ID: 503d
0x0004: Command: 0006 Status: 0010
0x0008: Class: 06 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfffa000/0x00001000
0x0014: BAR mem 32bit addr: 0xc0000000/0x10000000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:9:0: Intel unknown
0x0000: Vendor ID: 8086 Product ID: 502d
0x0004: Command: 0006 Status: 0010
0x0008: Class: 0b Subclass: 40 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfff4000/0x00002000
0x0014: BAR mem 32bit addr: 0xdffec000/0x00004000
0x0018: BAR mem 32bit addr: 0xdffe4000/0x00004000
0x001c: BAR mem 32bit addr: 0xdfff9000/0x00001000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:10:0: Intel EP80579 Reserved
0x0000: Vendor ID: 8086 Product ID: 503f
0x0004: Command: 0002 Status: 0010
0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdffe8000/0x00004000
0x0014: BAR mem 32bit addr: 0xdfff8000/0x00001000
0x0018: BAR mem 32bit addr: 0xdff40000/0x00040000
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:11:0: Intel unknown
0x0000: Vendor ID: 8086 Product ID: 504c
0x0004: Command: 0006 Status: 0010
0x0008: Class: 0b Subclass: 40 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfff7000/0x00001000
0x0014: BAR mem 32bit addr: 0xdfff6000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 07 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
3:12:0: Intel EP80579 Reserved
0x0000: Vendor ID: 8086 Product ID: 5030
0x0004: Command: 0002 Status: 0010
0x0008: Class: 11 Subclass: 01 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache
Line
Size: 00
0x0010: BAR mem 32bit addr: 0xdfff2000/0x00002000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x09: Vendor Specific
0x00f0: Capability 0x05: Message Signaled Interrupts (MSI)
holger
[demime 1.01d removed an attachment of type
application/pgp-signature
which had a name of signature.asc]
Index: dev/pci/if_em_hw.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/if_em_hw.c,v
retrieving revision 1.83
diff -u -p -r1.83 if_em_hw.c
--- dev/pci/if_em_hw.c 14 Mar 2015 03:38:48 -0000 1.83
+++ dev/pci/if_em_hw.c 17 Apr 2015 09:34:07 -0000
@@ -602,14 +602,17 @@ em_set_mac_type(struct em_hw *hw)
hw->mac_type = em_pch_lpt;
break;
case E1000_DEV_ID_EP80579_LAN_1:
+ case E1000_DEV_ID_EP80579_LAN_4:
hw->mac_type = em_icp_xxxx;
hw->icp_xxxx_port_num = 0;
break;
case E1000_DEV_ID_EP80579_LAN_2:
+ case E1000_DEV_ID_EP80579_LAN_5:
hw->mac_type = em_icp_xxxx;
hw->icp_xxxx_port_num = 1;
break;
case E1000_DEV_ID_EP80579_LAN_3:
+ case E1000_DEV_ID_EP80579_LAN_6:
hw->mac_type = em_icp_xxxx;
hw->icp_xxxx_port_num = 2;
break;
@@ -704,6 +707,9 @@ em_set_media_type(struct em_hw *hw)
case E1000_DEV_ID_EP80579_LAN_1:
case E1000_DEV_ID_EP80579_LAN_2:
case E1000_DEV_ID_EP80579_LAN_3:
+ case E1000_DEV_ID_EP80579_LAN_4:
+ case E1000_DEV_ID_EP80579_LAN_5:
+ case E1000_DEV_ID_EP80579_LAN_6:
hw->media_type = em_media_type_oem;
break;
default:
Index: dev/pci/if_em_hw.h
===================================================================
RCS file: /cvs/src/sys/dev/pci/if_em_hw.h,v
retrieving revision 1.63
diff -u -p -r1.63 if_em_hw.h
--- dev/pci/if_em_hw.h 1 Apr 2015 18:49:32 -0000 1.63
+++ dev/pci/if_em_hw.h 17 Apr 2015 09:34:08 -0000
@@ -594,6 +594,9 @@ int32_t em_check_phy_reset_block(struct
#define E1000_DEV_ID_EP80579_LAN_1 0x5040
#define E1000_DEV_ID_EP80579_LAN_2 0x5044
#define E1000_DEV_ID_EP80579_LAN_3 0x5048
+#define E1000_DEV_ID_EP80579_LAN_4 0x5041
+#define E1000_DEV_ID_EP80579_LAN_5 0x5045
+#define E1000_DEV_ID_EP80579_LAN_6 0x5049
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
[demime 1.01d removed an attachment of type application/pgp-signature which had
a name of signature.asc]
