I see this too, after the PS2 mux commit. For me, a workaround is to zzz the machine and wake it up. Not very neat but works.
2013/5/10 Frank Brodbeck <f...@guug.de> > Hi all, > > as soon as I start X (startx, no display manager involved) my systems > seems to hang right after I am seeing the root screen, i.e. mouse > pointer won't move (touchpad) and keystrokes seem to be unrecognized > most of the time. On the console I get lots of: > > pckbc: command timeout > pckbc: command timeout > pckbc_start: send error > pckbc: command timeout > pckbc: command timeout > pckbc_start: send error > pckbc: command timeout > pckbc: command timeout > pckbc_start: send error > pckbc: command timeout > > Disabling pms fixes the hangs, but obviously I am missing the mouse > thereafter. Problem seems to be window manager unrelated. I also tried > to narrow down the problem a bit by reverting the files under > sys/dev/pckbc to an older state but my so modified kernel does not > even recognize the touchpad: > > pckbd.c -> 1.32 > pms.c -> 1.35 > > Complete dmesg is below: > > OpenBSD 5.3-current (GENERIC) #160: Tue May 7 12:25:53 MDT 2013 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 2088452096 (1991MB) > avail mem = 2025242624 (1931MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (51 entries) > bios0: vendor Dell Inc. version "A02" date 01/11/2010 > bios0: Dell Inc. Vostro V13 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG APIC SLIC BOOT SLIC SSDT SSDT SSDT SSDT > SSDT > acpi0: wakeup devices P0P1(S3) USB2(S3) USBR(S3) RP03(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Solo CPU U3500 @ 1.40GHz, 1396.70 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: apic clock running at 199MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 11 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus 3 (RP02) > acpiprt4 at acpi0: bus 5 (RP03) > acpiprt5 at acpi0: bus 7 (RP04) > acpiprt6 at acpi0: bus 9 (RP05) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpitz0 at acpi0: critical temperature is 100 degC > acpibtn0 at acpi0: LID0 > acpibtn1 at acpi0: PWRB > acpibtn2 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "SIMPLO" serial 01AF type Li-I oem "Li-I" > acpiac0 at acpi0: AC unit online > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD03 > cpu0: Enhanced SpeedStep 1396 MHz: speeds: 1400, 1200, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1366x768 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 19 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi > azalia0: codecs: Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi > pci2 at ppb1 bus 3 > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi > pci3 at ppb2 bus 5 > re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 1 int 18, address 00:26:6c:10:fc:e2 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi > pci4 at ppb3 bus 7 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi > pci5 at ppb4 bus 9 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 23 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 19 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci6 at ppb5 bus 11 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 1 int 19 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <OCZ VERTEX PLUS> > wd0: 1-sector PIO, LBA48, 57241MB, 117231408 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 > int 19 > iic0 at ichiic0 > lisa0 at iic0 addr 0x1d: lis331dl > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 1 int 19 for native-PCI interrupt > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pckbc0: Active PS/2 Multiplexing, version 1.1 > pms0 at pckbc0 (aux slot #1) > pckbc0: using irq 12 for aux slot #1 > wsmouse0 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus0 at vscsi0: 256 targets > softraid0 at root > scsibus1 at softraid0: 256 targets > root on wd0a (25e69d0ca249cebe.a) swap on wd0b dump on wd0b > > Any hint appreciated. > > Frank. > > -- > Frank Brodbeck <f...@guug.de> > > -- May the most significant bit of your life be positive.
