Hi,
On Fri, May 10, 2013 at 02:55:15PM -0700, Bren Smith wrote:
> What are the contents of /var/log/Xorg.0.log?
Nothing too spectacular, I'd say but you are right I haven't thought
about the Xorg log. The lines:
Failed to switch from vt05 to vt01: Device busy
appear when I start trying to switch back to the console.
[ 7435.508] (--) checkDevMem: using aperture driver /dev/xf86
[ 7435.543] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 7435.556]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 7435.557] X Protocol Version 11, Revision 0
[ 7435.557] Build Operating System: OpenBSD 5.3 amd64
[ 7435.557] Current Operating System: OpenBSD bootes.split-brain.de 5.3
GENERIC#160 amd64
[ 7435.558] Build Date: 07 May 2013 12:10:09PM
[ 7435.558]
[ 7435.558] Current version of pixman: 0.28.0
[ 7435.558] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7435.558] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7435.560] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 11 00:19:47
2013
[ 7435.561] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 7435.561] (==) No Layout section. Using the first Screen section.
[ 7435.561] (==) No screen section available. Using defaults.
[ 7435.561] (**) |-->Screen "Default Screen Section" (0)
[ 7435.561] (**) | |-->Monitor "<default monitor>"
[ 7435.562] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7435.562] (==) Disabling SIGIO handlers for input devices
[ 7435.562] (==) Automatically adding devices
[ 7435.562] (==) Automatically enabling devices
[ 7435.562] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 7435.562] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 7435.562] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 7435.562] (II) Loader magic: 0x9e284ab5520
[ 7435.562] (II) Module ABI versions:
[ 7435.562] X.Org ANSI C Emulation: 0.4
[ 7435.562] X.Org Video Driver: 12.0
[ 7435.562] X.Org XInput driver : 16.0
[ 7435.562] X.Org Server Extension : 6.0
[ 7435.563] (--) PCI:*(0:0:2:0) 8086:2a42:1028:042b rev 7, Mem @
0xfe000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 7435.563] (--) PCI: (0:0:2:1) 8086:2a43:1028:042b rev 7, Mem @
0xfe400000/1048576
[ 7435.563] (II) LoadModule: "extmod"
[ 7435.565] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 7435.565] (II) Module extmod: vendor="X.Org Foundation"
[ 7435.565] compiled for 1.12.3, module version = 1.0.0
[ 7435.565] Module class: X.Org Server Extension
[ 7435.565] ABI class: X.Org Server Extension, version 6.0
[ 7435.565] (II) Loading extension MIT-SCREEN-SAVER
[ 7435.565] (II) Loading extension XFree86-VidModeExtension
[ 7435.565] (II) Loading extension XFree86-DGA
[ 7435.565] (II) Loading extension DPMS
[ 7435.565] (II) Loading extension XVideo
[ 7435.565] (II) Loading extension XVideo-MotionCompensation
[ 7435.565] (II) Loading extension X-Resource
[ 7435.565] (II) LoadModule: "dbe"
[ 7435.567] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 7435.567] (II) Module dbe: vendor="X.Org Foundation"
[ 7435.567] compiled for 1.12.3, module version = 1.0.0
[ 7435.567] Module class: X.Org Server Extension
[ 7435.567] ABI class: X.Org Server Extension, version 6.0
[ 7435.567] (II) Loading extension DOUBLE-BUFFER
[ 7435.567] (II) LoadModule: "glx"
[ 7435.569] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 7435.569] (II) Module glx: vendor="X.Org Foundation"
[ 7435.569] compiled for 1.12.3, module version = 1.0.0
[ 7435.569] ABI class: X.Org Server Extension, version 6.0
[ 7435.569] (==) AIGLX enabled
[ 7435.570] (II) Loading extension GLX
[ 7435.570] (II) LoadModule: "record"
[ 7435.571] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 7435.572] (II) Module record: vendor="X.Org Foundation"
[ 7435.572] compiled for 1.12.3, module version = 1.13.0
[ 7435.572] Module class: X.Org Server Extension
[ 7435.572] ABI class: X.Org Server Extension, version 6.0
[ 7435.572] (II) Loading extension RECORD
[ 7435.572] (II) LoadModule: "dri"
[ 7435.573] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 7435.574] (II) Module dri: vendor="X.Org Foundation"
[ 7435.574] compiled for 1.12.3, module version = 1.0.0
[ 7435.574] ABI class: X.Org Server Extension, version 6.0
[ 7435.574] (II) Loading extension XFree86-DRI
[ 7435.574] (II) LoadModule: "dri2"
[ 7435.575] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 7435.576] (II) Module dri2: vendor="X.Org Foundation"
[ 7435.576] compiled for 1.12.3, module version = 1.2.0
[ 7435.576] ABI class: X.Org Server Extension, version 6.0
[ 7435.576] (II) Loading extension DRI2
[ 7435.576] (==) Matched intel as autoconfigured driver 0
[ 7435.576] (==) Matched vesa as autoconfigured driver 1
[ 7435.576] (==) Assigned the driver to the xf86ConfigLayout
[ 7435.576] (II) LoadModule: "intel"
[ 7435.577] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 7435.579] (II) Module intel: vendor="X.Org Foundation"
[ 7435.579] compiled for 1.12.3, module version = 2.20.19
[ 7435.579] Module class: X.Org Video Driver
[ 7435.579] ABI class: X.Org Video Driver, version 12.0
[ 7435.579] (II) LoadModule: "vesa"
[ 7435.581] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 7435.581] (II) Module vesa: vendor="X.Org Foundation"
[ 7435.581] compiled for 1.12.3, module version = 2.3.2
[ 7435.581] Module class: X.Org Video Driver
[ 7435.581] ABI class: X.Org Video Driver, version 12.0
[ 7435.581] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 7435.582] (II) VESA: driver for VESA chipsets: vesa
[ 7435.582] drmOpenDevice: node name is /dev/drm0
[ 7435.582] drmOpenDevice: open result is 10, (OK)
[ 7435.583] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 7435.583] drmOpenDevice: node name is /dev/drm0
[ 7435.583] drmOpenDevice: open result is 10, (OK)
[ 7435.583] drmOpenByBusid: drmOpenMinor returns 10
[ 7435.583] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 7435.583] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 7435.583] drmOpenDevice: node name is /dev/drm0
[ 7435.583] drmOpenDevice: open result is 10, (OK)
[ 7435.583] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 7435.583] drmOpenDevice: node name is /dev/drm0
[ 7435.583] drmOpenDevice: open result is 10, (OK)
[ 7435.583] drmOpenByBusid: drmOpenMinor returns 10
[ 7435.583] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 7435.583] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 7435.584] (WW) Falling back to old probe method for vesa
[ 7435.584] drmOpenDevice: node name is /dev/drm0
[ 7435.584] drmOpenDevice: open result is 10, (OK)
[ 7435.584] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 7435.584] drmOpenDevice: node name is /dev/drm0
[ 7435.584] drmOpenDevice: open result is 10, (OK)
[ 7435.584] drmOpenByBusid: drmOpenMinor returns 10
[ 7435.584] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 7435.584] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 7435.584] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 7435.584] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7435.584] (==) intel(0): RGB weight 888
[ 7435.584] (==) intel(0): Default visual is TrueColor
[ 7435.584] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 7435.585] (**) intel(0): Relaxed fencing disabled
[ 7435.585] (**) intel(0): Wait on SwapBuffers? enabled
[ 7435.585] (**) intel(0): Triple buffering? enabled
[ 7435.585] (**) intel(0): Framebuffer tiled
[ 7435.585] (**) intel(0): Pixmaps tiled
[ 7435.585] (**) intel(0): 3D buffers tiled
[ 7435.585] (**) intel(0): SwapBuffers wait enabled
[ 7435.585] (==) intel(0): video overlay key set to 0x101fe
[ 7435.585] (II) intel(0): Output LVDS1 has no monitor section
[ 7435.608] (II) intel(0): Output VGA1 has no monitor section
[ 7435.629] (II) intel(0): Output DP1 has no monitor section
[ 7436.026] (II) intel(0): Output TV1 has no monitor section
[ 7436.026] (II) intel(0): EDID for output LVDS1
[ 7436.026] (II) intel(0): Manufacturer: AUO Model: 112c Serial#: 0
[ 7436.026] (II) intel(0): Year: 2008 Week: 1
[ 7436.026] (II) intel(0): EDID Version: 1.3
[ 7436.026] (II) intel(0): Digital Display Input
[ 7436.026] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 7436.026] (II) intel(0): Gamma: 2.20
[ 7436.026] (II) intel(0): No DPMS capabilities specified
[ 7436.026] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7436.026] (II) intel(0): First detailed timing is preferred mode
[ 7436.026] (II) intel(0): redX: 0.585 redY: 0.335 greenX: 0.330 greenY:
0.575
[ 7436.026] (II) intel(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY:
0.329
[ 7436.026] (II) intel(0): Manufacturer's mask: 0
[ 7436.026] (II) intel(0): Supported detailed timing:
[ 7436.027] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm
[ 7436.027] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446
h_blank_end 1456 h_border: 0
[ 7436.027] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 793 v_border: 0
[ 7436.027] (II) intel(0): Supported detailed timing:
[ 7436.027] (II) intel(0): clock: 46.2 MHz Image Size: 293 x 164 mm
[ 7436.027] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446
h_blank_end 1456 h_border: 0
[ 7436.027] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 793 v_border: 0
[ 7436.027] (II) intel(0): XX31GB133XW1
[ 7436.027] (II) intel(0): Unknown vendor-specific block 0
[ 7436.027] (II) intel(0): EDID (in hex):
[ 7436.027] (II) intel(0): 00ffffffffffff0006af2c1100000000
[ 7436.027] (II) intel(0): 01120103901d10780af9d59555549327
[ 7436.027] (II) intel(0): 21505400000001010101010101010101
[ 7436.027] (II) intel(0): 010101010101121b565a500019303020
[ 7436.027] (II) intel(0): 360025a41000001a0c12565a50001930
[ 7436.027] (II) intel(0): 3020360025a41000001a000000fe0058
[ 7436.027] (II) intel(0): 58333147804231333358573100000000
[ 7436.027] (II) intel(0): 00000000000000000001010a20200076
[ 7436.027] (II) intel(0): EDID vendor "AUO", prod id 4396
[ 7436.027] (II) intel(0): Printing DDC gathered Modelines:
[ 7436.027] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446
1456 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 7436.027] (II) intel(0): Modeline "1366x768"x0.0 46.20 1366 1414 1446
1456 768 771 777 793 +hsync -vsync (31.7 kHz e)
[ 7436.028] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 7436.028] (II) intel(0): Printing probed modes for output LVDS1
[ 7436.028] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446
1456 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 7436.028] (II) intel(0): Modeline "1366x768"x40.0 46.20 1366 1414 1446
1456 768 771 777 793 +hsync -vsync (31.7 kHz e)
[ 7436.028] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7436.028] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7436.028] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7436.028] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7436.051] (II) intel(0): EDID for output VGA1
[ 7436.073] (II) intel(0): EDID for output DP1
[ 7436.433] (II) intel(0): EDID for output TV1
[ 7436.433] (II) intel(0): Output LVDS1 connected
[ 7436.433] (II) intel(0): Output VGA1 disconnected
[ 7436.433] (II) intel(0): Output DP1 disconnected
[ 7436.433] (II) intel(0): Output TV1 disconnected
[ 7436.433] (II) intel(0): Using exact sizes for initial modes
[ 7436.433] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 7436.433] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 7436.433] (II) intel(0): Kernel page flipping support detected, enabling
[ 7436.433] (**) intel(0): Display dimensions: (290, 160) mm
[ 7436.433] (**) intel(0): DPI set to (119, 121)
[ 7436.433] (II) Loading sub module "fb"
[ 7436.433] (II) LoadModule: "fb"
[ 7436.436] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 7436.437] (II) Module fb: vendor="X.Org Foundation"
[ 7436.437] compiled for 1.12.3, module version = 1.0.0
[ 7436.437] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7436.437] (II) Loading sub module "dri2"
[ 7436.437] (II) LoadModule: "dri2"
[ 7436.438] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 7436.439] (II) Module dri2: vendor="X.Org Foundation"
[ 7436.439] compiled for 1.12.3, module version = 1.2.0
[ 7436.439] ABI class: X.Org Server Extension, version 6.0
[ 7436.439] (II) UnloadModule: "vesa"
[ 7436.439] (II) Unloading vesa
[ 7436.439] (==) Depth 24 pixmap format is 32 bpp
[ 7436.439] (II) intel(0): [DRI2] Setup complete
[ 7436.439] (II) intel(0): [DRI2] DRI driver: i965
[ 7436.439] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632,
tiled
[ 7436.503] (II) UXA(0): Driver registered support for the following
operations:
[ 7436.503] (II) solid
[ 7436.503] (II) copy
[ 7436.503] (II) composite (RENDER acceleration)
[ 7436.503] (II) put_image
[ 7436.503] (II) get_image
[ 7436.503] (==) intel(0): Backing store disabled
[ 7436.503] (==) intel(0): Silken mouse disabled
[ 7436.503] (II) intel(0): Initializing HW Cursor
[ 7436.503] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 7436.505] (==) intel(0): DPMS enabled
[ 7436.505] (==) intel(0): Intel XvMC decoder enabled
[ 7436.505] (II) intel(0): Set up textured video
[ 7436.505] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7436.505] (II) intel(0): direct rendering: DRI2 Enabled
[ 7436.559] (--) RandR disabled
[ 7436.559] (II) Initializing built-in extension Generic Event Extension
[ 7436.559] (II) Initializing built-in extension SHAPE
[ 7436.559] (II) Initializing built-in extension MIT-SHM
[ 7436.559] (II) Initializing built-in extension XInputExtension
[ 7436.559] (II) Initializing built-in extension XTEST
[ 7436.559] (II) Initializing built-in extension BIG-REQUESTS
[ 7436.559] (II) Initializing built-in extension SYNC
[ 7436.559] (II) Initializing built-in extension XKEYBOARD
[ 7436.559] (II) Initializing built-in extension XC-MISC
[ 7436.559] (II) Initializing built-in extension SECURITY
[ 7436.559] (II) Initializing built-in extension XINERAMA
[ 7436.559] (II) Initializing built-in extension XFIXES
[ 7436.559] (II) Initializing built-in extension RENDER
[ 7436.559] (II) Initializing built-in extension RANDR
[ 7436.559] (II) Initializing built-in extension COMPOSITE
[ 7436.559] (II) Initializing built-in extension DAMAGE
[ 7436.625] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7436.625] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7436.625] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7436.625] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 7436.625] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7436.626] (II) AIGLX: Loaded and initialized i965
[ 7436.626] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7436.628] (II) intel(0): Setting screen physical size to 361 x 203
[ 7437.032] (II) config/wscons: checking input device /dev/wskbd
[ 7437.032] (II) wskbd: using layout us
[ 7437.032] (II) LoadModule: "kbd"
[ 7437.034] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 7437.034] (II) Module kbd: vendor="X.Org Foundation"
[ 7437.034] compiled for 1.12.3, module version = 1.7.0
[ 7437.034] Module class: X.Org XInput Driver
[ 7437.034] ABI class: X.Org XInput driver, version 16.0
[ 7437.034] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 7437.034] (**) /dev/wskbd: always reports core events
[ 7437.034] (**) /dev/wskbd: always reports core events
[ 7437.035] (**) Option "Protocol" "standard"
[ 7437.035] (**) Option "XkbRules" "base"
[ 7437.035] (**) Option "XkbModel" "pc105"
[ 7437.035] (**) Option "XkbLayout" "us"
[ 7437.035] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 7448.427] (II) config/wscons: checking input device /dev/wsmouse
[ 7448.427] (II) LoadModule: "ws"
[ 7448.429] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 7448.430] (II) Module ws: vendor="X.Org Foundation"
[ 7448.430] compiled for 1.12.3, module version = 1.3.0
[ 7448.430] Module class: X.Org XInput Driver
[ 7448.430] ABI class: X.Org XInput driver, version 16.0
[ 7448.430] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 7448.430] (**) /dev/wsmouse: always reports core events
[ 7448.430] (II) ws: /dev/wsmouse: debuglevel 0
[ 7448.430] (**) Option "Device" "/dev/wsmouse"
[ 7448.430] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 7448.430] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 7448.430] (**) ws: /dev/wsmouse: associated screen: 0
[ 7459.814] (II) ws: /dev/wsmouse: minimum x position: 0
[ 7459.814] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 7459.814] (II) ws: /dev/wsmouse: minimum y position: 0
[ 7459.814] (II) ws: /dev/wsmouse: maximum y position: 767
[ 7459.814] (==) ws: /dev/wsmouse: Buttons: 7
[ 7459.814] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 7459.814] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 7)
[ 7471.206] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 7471.206] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 7471.206] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 7471.206] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 7471.208] Failed to switch from vt05 to vt01: Device busy
[ 7471.208] Failed to switch from vt05 to vt01: Device busy
[ 7471.209] Failed to switch from vt05 to vt01: Device busy
[ 7471.209] Failed to switch from vt05 to vt01: Device busy
[ 7471.209] Failed to switch from vt05 to vt01: Device busy
[ 7471.210] Failed to switch from vt05 to vt01: Device busy
[ 7471.210] Failed to switch from vt05 to vt01: Device busy
[ 7471.211] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 7473.797] (II) UnloadModule: "ws"
[ 7473.797] (II) UnloadModule: "kbd"
[ 7473.825] Server terminated successfully (0). Closing log file.
--
Frank Brodbeck <f...@guug.de>
