On 5/10/05, Nick Holland <[EMAIL PROTECTED]> wrote:
> Siju George wrote:
> > Hi all,
> >
> > Could someone please suggest me a good 4 port NIC ( I mean I will be
> > able to use it in the same way as I use 4 NICs but it will only
> > consume only 1 PCI slot) for OpenBSD 3.7??
> >
> > Not a Gigabit one please
> >
> > Sorry vetrans, I am a little behind in hardware part :-( but sure I
> > am catching up :-)
> >
> > And if somebody wants me to define what I mean by "good" then
> >
> > good = nice perfomance i.e one that will not give me the error the
> > current NIC gives me
> >
> > " dc0: watchdog timeout "
>
> yikes.
> Some (all?) of the best quad-port 10/100 NICs are based on Intel 21143
> dc(4) chips. There are some cheap dc(4) chips out there which work
> poorly. However, I'm not aware of anyone making a quad-port cheap-dc(4)
> card -- the ones I have seen were all 21143-based. That's not to say
> someone didn't make one, but I'm not aware of one.
>
> You didn't specify the card you have, or provide a dmesg of the machine
> giving you this error...both would have been interesting.
>
Oh! am sorry :-(
I am not using a quad card now. I want to fit 5 nics to a system that
has only 2 PCI slots thats why I am searching.
I am giving you the details of the system.
Tankyou so much for your advice and explanation :-)
kind regards
Siju
---------dmesg.boot--------------------------------
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU 1000MHz ("GenuineIntel" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 266969088 (260712K)
avail mem = 236720128 (231172K)
using 3284 buffers containing 13451264 bytes (13136K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/06/01, BIOS32 rev. 0 @ 0xfdb70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6580/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810E Graphics" rev 0x03:
aperture at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
mtd0 at pci1 dev 4 function 0 "Myson Century MTD803 10/100" rev 0x00:
irq 10 address 00:e0:4c:ff:0b:d8
mtdphy0 at mtd0 phy 0: MTD972 10/100 media interface, rev. 0
rl0 at pci1 dev 5 function 0 "Realtek 8139" rev 0x10: irq 3 address
00:08:a1:78:57:86
rlphy0 at rl0 phy 0: RTL internal phy
dc0 at pci1 dev 6 function 0 "Davicom DM9102" rev 0x31: irq 5, address
00:80:ad:7f:21:b0
amphy0 at dc0 phy 1: Am79C873 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to comp
atibility
wd0 at pciide0 channel 0 drive 0: <ST340810A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 3, ICH AC97
ac97: codec id 0x414c4326 (Realtek RL5383 rev 6)
ac97: codec features Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask eb45 netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU 1000MHz ("GenuineIntel" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 266969088 (260712K)
avail mem = 236720128 (231172K)
using 3284 buffers containing 13451264 bytes (13136K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/06/01, BIOS32 rev. 0 @ 0xfdb70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6580/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810E Graphics" rev 0x03:
aperture at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
mtd0 at pci1 dev 4 function 0 "Myson Century MTD803 10/100" rev 0x00:
irq 10 address 00:e0:4c:ff:0b:d8
mtdphy0 at mtd0 phy 0: MTD972 10/100 media interface, rev. 0
rl0 at pci1 dev 5 function 0 "Realtek 8139" rev 0x10: irq 3 address
00:08:a1:78:57:86
rlphy0 at rl0 phy 0: RTL internal phy
dc0 at pci1 dev 6 function 0 "Davicom DM9102" rev 0x31: irq 5, address
00:80:ad:7f:21:b0
amphy0 at dc0 phy 1: Am79C873 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340810A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 3, ICH AC97
ac97: codec id 0x414c4326 (Realtek RL5383 rev 6)
ac97: codec features Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask eb45 netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
--------------------------------------------------------------------------------------
# netstat -m
160 mbufs in use:
134 mbufs allocated to data
23 mbufs allocated to packet headers
3 mbufs allocated to socket names and addresses
131/284/6144 mbuf clusters in use (current/peak/max)
656 Kbytes allocated to network (46% in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines
#
----------------------------------------------------------------------------------------------
# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Colls
lo0 33224 <Link> 2695 0 2695 0 0
lo0 33224 127/8 127.0.0.1 2695 0 2695 0 0
lo0 33224 ::1/128 ::1 2695 0 2695 0 0
lo0 33224 fe80::%lo0/ fe80::1%lo0 2695 0 2695 0 0
mtd0 1500 <Link> 00:e0:4c:ff:0b:d8 67400 0 13949 0 0
mtd0 1500 61.11.124/2 61.11.125.14 67400 0 13949 0 0
mtd0 1500 fe80::%mtd0 fe80::2e0:4cff:fe 67400 0 13949 0 0
rl0 1500 <Link> 00:08:a1:78:57:86 794516 0 131112 5 0
rl0 1500 fe80::%rl0/ fe80::208:a1ff:fe 794516 0 131112 5 0
rl0 1500 202.88.242/ 202.88.243.55 794516 0 131112 5 0
dc0 1500 <Link> 00:80:ad:7f:21:b0 662522 0 691850 4 0
dc0 1500 172.16/12 172.17.1.0 662522 0 691850 4 0
dc0 1500 fe80::%dc0/ fe80::280:adff:fe 662522 0 691850 4 0
pflog0 33224 <Link> 0 0 0 0 0
pfsync0 2020 <Link> 0 0 0 0 0
enc0* 1536 <Link> 0 0 0 0 0
#
