On Mon, Jul 17, 2017 at 5:50 AM, Pohjolainen, Topi <
topi.pohjolai...@gmail.com> wrote:
> On Mon, Jul 17, 2017 at 03:29:32PM +0300, Pohjolainen, Topi wrote:
> > On Fri, Jul 14, 2017 at 03:22:51PM -0700, Chad Versace wrote:
> > > On Wed 12 Jul 2017, Jason Ekstrand wrote:
> > > > HiZ, like MCS and CCS_E, can compress more than just clear colors so
> we
> > > > want it turned on whenever the miptree is being used as a depth
> > > > attachment. It's theoretically possible for someone to create a
> depth
> > > > texture, upload data with glTexSubImage2D, and texture from it
> without
> > > > ever binding it as a depth target. If this happens, we would end up
> > > > wasting a bit of space by allocating a HiZ surface we never use.
> > > > However, this is rather unlikely out side of test cases, so we're
> better
> > > > off just allocating it up-front.
> > > > ---
> > >
> > > I've read of rendering techniques that use high-quality, pre-rendered
> > > cascading shadow maps for scenes with fixed lights. And that would
> > > trigger the glTexSubImage2D case. But, even in that case, so little
> > > memory is wasted that I don't care.
> > >
> > > Reviewed-by: Chad Versace <chadvers...@chromium.org>
> >
> > I'm now looking at this more after rebasing my isl patches on top. I
> think
> > this shows a bug we have in intel_miptree_choose_aux_usage() - there we
> > consider only if format and platform support hiz, but ignore tiling,
> ending
> > up setting HIZ usage even for linear depth.
> >
> > Combined with this patch we start to allocate hiz-buffers for linear
> depth
> > buffers used in read_pixels(). Backtrace with my isl support (which
> should be
> > more or less equivalent from this decision making point of you). By
> chance ISL
> > complains unlike i965 (here it actually complains about ISL_SURF_DIM_1D
> but
> > tiling is incompatible as well):
>
Ugh... I didn't think linear depth was ever supported.
> > #4 0x00007ffff1d78e6e in isl_calc_phys_level0_extent_sa
> (dev=0x7ffff7fa1208,
> > phys_level0_sa=<synthetic pointer>, msaa_layout=<optimized out>,
> > tiling=ISL_TILING_HIZ, dim_layout=ISL_DIM_LAYOUT_GEN4_2D,
> > info=0x7fffffffd6f0) at isl/isl.c:627
> > #5 isl_surf_init_s (dev=dev@entry=0x7ffff7fa1208,
> > surf=surf@entry=0x7fffffffd740, info=info@entry=0x7fffffffd6f0)
> > at isl/isl.c:1474
> > #6 0x00007ffff1d78fc9 in isl_surf_get_hiz_surf (dev=dev@entry
> =0x7ffff7fa1208,
> > surf=surf@entry=0x555555b024d0, hiz_surf=hiz_surf@entry=
> 0x7fffffffd740)
> > at isl/isl.c:1659
> > #7 0x00007ffff1cb4c4a in intel_miptree_alloc_hiz (
> > brw=brw@entry=0x7ffff7f7c040, mt=mt@entry=0x555555b024d0)
> > at intel_mipmap_tree.c:2139
> > #8 0x00007ffff1cb8017 in intel_miptree_alloc_aux (
> > brw=brw@entry=0x7ffff7f7c040, mt=0x555555b024d0)
> > at intel_mipmap_tree.c:2178
> > #9 0x00007ffff1cb8362 in intel_miptree_create (brw=brw@entry
> =0x7ffff7f7c040,
> > target=target@entry=3553,
> > format=format@entry=MESA_FORMAT_Z24_UNORM_X8_UINT,
> > first_level=first_level@entry=0, last_level=last_level@entry=0,
> > width0=<optimized out>, height0=60, depth0=1, num_samples=0,
> > layout_flags=64) at intel_mipmap_tree.c:971
> > #10 0x00007ffff1cb8d14 in intel_miptree_map_blit (slice=0, level=0,
> > map=0x555555a7c710, mt=0x555555b1b7d0, brw=0x7ffff7f7c040)
> > at intel_mipmap_tree.c:3247
> > #11 intel_miptree_map (brw=brw@entry=0x7ffff7f7c040, mt=0x555555b1b7d0,
> > level=0, slice=0, x=x@entry=60, y=y@entry=100, w=60, h=60, mode=1,
> > out_ptr=0x7fffffffdaa8, out_stride=0x7fffffffdab0)
> > at intel_mipmap_tree.c:3817
> > #12 0x00007ffff1cb252f in intel_map_renderbuffer (ctx=0x7ffff7f7c040,
> > rb=0x5555558d2f60, x=60, y=100, w=<optimized out>, h=<optimized out>,
> > mode=1, out_map=0x7fffffffdb98, out_stride=0x7fffffffdb90)
> > at intel_fbo.c:169
> > #13 0x00007ffff19eef3b in read_depth_pixels (packing=0x7fffffffdce0,
>
> This should be sufficient (at least works for the case I was debugging):
>
> diff --git a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> index ecd57cbf30..5eb778541f 100644
> --- a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> +++ b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> @@ -219,6 +219,9 @@ intel_miptree_supports_hiz(struct brw_context *brw,
> if (!brw->has_hiz)
> return false;
>
> + if (mt->tiling != I915_TILING_Y)
> + return false;
>
This doesn't quite work. I sent out a patch to go before this one in the
series that should solve the problem.
> +
> switch (mt->format) {
> case MESA_FORMAT_Z_FLOAT32:
> case MESA_FORMAT_Z32_FLOAT_S8X24_UINT:
>
>
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev
