Hi all, I am finally getting around to finishing a project that I started during COVID, and would like to get feedback and suggestions. I got an old 1985 Macintosh which was dead and the guts were taken out of. So essentially it is merely the case of this iconic piece of computer/pop culture design. My goals with this are to: * Mount a iPad mini where the original 9 inch B&W LCD display was. * Mount a Mac mini in the bottom of the case where the original motherboard and transformer were. * Drill a hole in the rear of the case and use a flush mount USB and 3.5mm audio jack port like the ones used on boats/RVs * Have as few cables hanging out of the back as possible; hopefully only the power cable. * Use an Apple Magic Keyboard via bluetooth; may spray paint it beige to match the old Mac case, don’t know on that part. * Connect the Mac mini to the iPad via Sidecar
Any thoughts and opinions as to how to complete this project are much appreciated. Frank Ventura -- The following information is important for all members of the Mac Visionaries list. If you have any questions or concerns about the running of this list, or if you feel that a member's post is inappropriate, please contact the owners or moderators directly rather than posting on the list itself. Your Mac Visionaries list moderator is Mark Taylor. You can reach mark at: mk...@ucla.edu and your owner is Cara Quinn - you can reach Cara at caraqu...@caraquinn.com The archives for this list can be searched at: http://www.mail-archive.com/macvisionaries@googlegroups.com/ --- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to macvisionaries+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/macvisionaries/MN0PR13MB6737E75EA60CDF9DCC739E08F4572%40MN0PR13MB6737.namprd13.prod.outlook.com.
