On 10/20/2013 09:12 PM, zhongjj wrote: > I have one on hand , > http://updates.lemote.com/~zjj/debian_wheezy_mipsel_basesys.tar.gz > > do you know any pmon command ? like load > lsdev > load (wd0,0)/PATH_TO_KERNEL > boot
Thanks for your help. I'm learning PMON now. I've untarred your image and when I attempt to load it in PMON via: load (wd0,5)/wheezy/boot/vmlinuz (# my "/" is located on /dev/sda5 partition). I get: "Exception Cause=TLB miss on load or ifetch, ..." The same happens when I attempt to load the pre-installed kernel: load (wd0,5)/boot/vmlinuz I'm sure I'm missing something very basic. Again thanks for your help. > If you don't have any initramfs, you could download from > http://mirror.lemote.com/LOonux3/Images/recover/ls3a-niface/ > just donwload boot.cfg and vmlinuz to a usb flash, there's an initramfs > built in the kernel for recovery tool, if you boot from > this kernel, just forget the green "recovery tool" , but switch into a > new terminal (ctrl+alt+Fx) > > I did not support a boot.cfg for booting. you could write it yourself > for PMON. (put it on the first partition, or boot dir under the first > partition). > boot.cfg example below: > > timeout 3 > default 0 > showmenu 1 > title wheezy > kernel (wd0,0)/boot/vmlinuz > args console=tty root=/dev/sda1 > > > 于 2013年10月21日 01:45, h0ost 写道: >> On 10/20/2013 12:50 AM, 钟佳佳 wrote: >>> While booting there would be a dragon logo, precess 'u', select the >>> recovery title if you want to >>> use an initramfs in ram, then you could partition the disk, and >>> install the os-img you get >>> from debian.org (wheezy). >>> >> Thank you very much for your help. >> One quick question: Is there a debian wheezy image that already includes >> the loongson-3a kernel that was linked in one of the messages? >> >> If not, I am thinking of installing that particular kernel on my laptop >> now, then update the repositories in /etc/apt/sources... to point to >> offical debian wheezy, then apt-get dist-upgrade. >> Would that work? >> >> >> >>> ------------------ Original ------------------ >>> From: "h0ost";<h...@mailoo.org>; >>> Date: Sun, Oct 20, 2013 06:51 AM >>> To: "loongson-dev"<loongson-dev@googlegroups.com>; >>> >>> Subject: [loongson-dev] new Loongson-3A laptop, basic questions >>> >>> >>> >>> Hello, >>> >>> I just received my Loongson-3A laptop. I would like to install an >>> alternative OS. Preferably, Debian Wheeyz, Parabola, anything really. >>> >>> I can't find any instructions in English on how to install such OS, or >>> where to get OS images. I realize this is probably because the laptop >>> is new. >>> >>> If someone can help me figure this out, I will be most thankful. I am >>> comfortable GNU/Linux user, and can probably figure out most problems, >>> but I need help with the basics. >>> >>> Thank you, >>> Tonny >>> > > -- You received this message because you are subscribed to the Google Groups "loongson-dev" group. To unsubscribe from this group and stop receiving emails from it, send an email to loongson-dev+unsubscr...@googlegroups.com. To post to this group, send email to loongson-dev@googlegroups.com. Visit this group at http://groups.google.com/group/loongson-dev. For more options, visit https://groups.google.com/groups/opt_out.
