On Fri, 2014-04-18 at 07:21 -0500, Shruti Kanetkar wrote:
> FMan 1 Gb/s MACs (dTSEC and mEMAC) have support for SGMII PHYs.
> Add support for the internal SerDes TBI PHYs
>
> Based on prior work by Andy Fleming <aflem...@gmail.com>
>
> Signed-off-by: Shruti Kanetkar <shr...@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 28 +++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 51 +++++++++
> arch/powerpc/boot/dts/fsl/p1023si-post.dtsi | 14 +++
> arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 64 ++++++++++++
> arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 64 ++++++++++++
> arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 104 +++++++++++++++++++
> arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 64 ++++++++++++
> arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 128 +++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 154
> ++++++++++++++++++++++++++++
> 9 files changed, 671 insertions(+)
>
> diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> index cbc354b..45b0ff5 100644
> --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> @@ -172,6 +172,34 @@
> compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
> };
>
> +/include/ "qoriq-fman3-0-1g-4.dtsi"
> +/include/ "qoriq-fman3-0-1g-5.dtsi"
> +/include/ "qoriq-fman3-0-10g-0.dtsi"
> +/include/ "qoriq-fman3-0-10g-1.dtsi"
> + fman@400000 {
> + ethernet@e8000 {
> + tbi-handle = <&tbi4>;
> + };
Binding needed
Where is the "reg" for these unit addresses?
> + mdio@e9000 {
> + tbi4: tbi-phy@8 {
> + reg = <0x8>;
> + device_type = "tbi-phy";
> + };
> + };
Binding needed for tbi-phy device_type. Why are we using device_type at
all for this?
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
