Add compatible "fsl,mpic-msi-v4.3" for MPIC v4.3. MPIC v4.3 contains
MSIIR and MSIIR1. MSIIR supports 8 MSI registers and MSIIR1 supports
16 MSI registers, but uses different IBS and SRS shift. When using
MSIR1, the interrupt number is not consecutive. It is hard to use
'msi-available-ranges' to describe the ranges of the available
interrupt and the ranges are related to the application, rather than
the description of the hardware. this patch also removes
'msi-available-ranges' property.
Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com>
---
.../devicetree/bindings/powerpc/fsl/msi-pic.txt | 49 ++++++++++------------
1 file changed, 22 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 5693877..e851e93 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -1,26 +1,23 @@
* Freescale MSI interrupt controller
Required properties:
-- compatible : compatible list, contains 2 entries,
+- compatible : compatible list, may contains one or two entries,
first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
- etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
- the parent type.
+ etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+ "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+ version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+ provided to access these 16 registers, compatible "fsl,mpic-msi-v4.3"
+ should be used.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
- The second region should contain the address of aliased MSIIR register for
- platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
- msi interrupt can be used in the 256 msi interrupts. This property is
- optional, without this, all the 256 MSI interrupts can be used.
- Each available range must begin and end on a multiple of 32 (i.e.
- no splitting an individual MSI register or the associated PIC interrupt).
+ The second region should contain the address of aliased MSIIR or MSIIR1
+ register for platforms that have such an alias, if using MSIIR1, the second
+ region must be added because different MSI group has different MSIRR1 offset.
- interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
- be set as edge sensitive. If msi-available-ranges is present, only
- the interrupts that correspond to available ranges shall be present.
+ be set as edge sensitive.
- interrupt-parent: the phandle for the interrupt controller
that services interrupts for this device. for 83xx cpu, the interrupts
@@ -39,20 +36,18 @@ Optional properties:
Example:
msi@41600 {
- compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200 0x44140 4>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
The Freescale hypervisor and msi-address-64
-------------------------------------------
--
1.8.1.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
