Do you try slot7? PCIe1 connects to slot7 directly. Roy > -----Original Message----- > From: Benjamin Herrenschmidt [mailto:b...@kernel.crashing.org] > Sent: Thursday, May 16, 2013 2:09 PM > To: Zang Roy-R61911 > Cc: Bhushan Bharat-R65777; Liu Qiang-B32616; Fleming Andy-AFLEMING; > linuxppc-dev@lists.ozlabs.org; Xie Shaohui-B21989 > Subject: Re: SATA FSL and upstreaming > > On Thu, 2013-05-16 at 06:05 +0000, Zang Roy-R61911 wrote: > > I do not suggest changing the RCW. If the RCW is broken on Ben's side, > > it is not easy to recover for him. > > Let's check the U-boot output first. > > U-Boot 2013.01-00009-g7bcd7f4 (Mar 14 2013 - 14:23:16) > > CPU0: P5020E, Version: 1.0, (0x82280010) > Core: E5500, Version: 1.0, (0x80240010) > Clock Configuration: > CPU0:2000 MHz, CPU1:2000 MHz, > CCB:800 MHz, > DDR:666.667 MHz (1333.333 MT/s data rate) (Asynchronous), LBC:100 > MHz > FMAN1: 600 MHz > QMAN: 400 MHz > PME: 400 MHz > L1: D-cache 32 kB enabled > I-cache 32 kB enabled > Board: P5020DS, Sys ID: 0x1c, Sys Ver: 0x12, FPGA Ver: 0x05, vBank: 0 > Reset Configuration Word (RCW): > 00000000: 0c540000 00000000 1e120000 00000000 > 00000010: d8984a01 03002000 de800000 41000000 > 00000020: 00000000 00000000 00000000 10070000 > 00000030: 00000000 00000000 00000000 00000000 > SERDES Reference Clocks: Bank1=100Mhz Bank2=125Mhz Bank3=125Mhz > I2C: ready > SPI: ready > DRAM: Initializing....using SPD > Detected UDIMM i-DIMM > Detected UDIMM i-DIMM > 2 GiB left unmapped > 4 GiB (DDR3, 64-bit, CL=9, ECC on) > DDR Controller Interleaving Mode: cache line > DDR Chip-Select Interleaving Mode: CS0+CS1 > Testing 0x00000000 - 0x7fffffff > Testing 0x80000000 - 0xffffffff > Remap DDR 2 GiB left unmapped > > POST memory PASSED > Flash: 128 MiB > L2: 512 KB enabled > Corenet Platform Cache: 2048 KB enabled > SRIO1: disabled > SRIO2: disabled > NAND: 1024 MiB > MMC: FSL_SDHC: 0 > EEPROM: NXID v1 > PCIe1: Root Complex, no link, regs @ 0xfe200000 > PCIe1: Bus 00 - 00 > PCIe2: disabled > PCIe3: Root Complex, no link, regs @ 0xfe202000 > PCIe3: Bus 01 - 01 > PCIe4: disabled > In: serial > Out: serial > Err: serial > Net: Initializing Fman > Fman1: Uploading microcode version 106.1.7 > PHY reset timed out > PHY reset timed out > PHY reset timed out > PHY reset timed out > FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, FM1@TGEC1 > Hit any key to stop autoboot: 0 > => > > Cheers, > Ben. > >
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
