> -----Original Message----- > From: Linuxppc-dev [mailto:linuxppc-dev-bounces+tie- > fei.zang=freescale....@lists.ozlabs.org] On Behalf Of Bhushan Bharat- > R65777 > Sent: Thursday, May 16, 2013 2:02 PM > To: Benjamin Herrenschmidt; Liu Qiang-B32616 > Cc: Fleming Andy-AFLEMING; linuxppc-dev@lists.ozlabs.org; Xie Shaohui- > B21989 > Subject: RE: SATA FSL and upstreaming > > > > > -----Original Message----- > > From: Linuxppc-dev [mailto:linuxppc-dev- > > bounces+bharat.bhushan=freescale....@lists.ozlabs.org] On Behalf Of > > bounces+Benjamin > > Herrenschmidt > > Sent: Thursday, May 16, 2013 11:16 AM > > To: Liu Qiang-B32616 > > Cc: linuxppc-dev@lists.ozlabs.org; Fleming Andy-AFLEMING; Xie > > Shaohui-B21989 > > Subject: Re: SATA FSL and upstreaming > > > > On Thu, 2013-05-16 at 14:47 +1000, Benjamin Herrenschmidt wrote: > > > Hi folks ! > > > > > > So I was trying to use my 5020ds to test some stuff today. Since I > > > hadn't used it in a while, I decided to "upgrade" it to the latest > > > NOR etc... > > > > On another note, I can't seem to get any PCIe card recognized in any > slot... > > > > Can you give me an example config of the DIP switches that is known to > > work with some slots ? Is there some EEPROM config needed ? If yes, > > any pointers ? (I can't quite make sense of either u-boot or the doc > there). > > Can you give RCW dump? > Or can try the attached RCW. I do not suggest changing the RCW. If the RCW is broken on Ben's side, it is not easy to recover for him. Let's check the U-boot output first. Thanks. Roy
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
