Some PowerPC processors can be run in either big or little endian modes, some others can map selected pages of memory as little endian, which allows the same thing. Until now we have only supported the default big endian mode in Linux. This patch set introduces little endian support for the 44x family of PowerPC processors.
This patch set in combination with a patched GCC, binutils, uClibc and buildroot has allowed for a full proof of concept little endian environment on a 440 Taishan board, which was able to successfully run busybox, OpenSSH and a handful of other userspace programs without problems. I am not currently in a position to release my patches for the toolchain, but in the meantime I thought I would send my patches on the kernel side for review and feedback. While my toolchain patches are necessary to support the powerpcle-linux target, the kernel can still be built with an unpatched toolchain using the powerpcle-elf target instead. Userspace programs, however, do require the patched toolchain to build. Since the processor still starts as big endian, the boot wrapper must still be compiled with a big endian 32bit toolchain. This can be passed into the build as CROSSBE_COMPILE in the same manner as the CROSS_COMPILE variable. When the boot wrapper is finished it runs some platform specific assembly to switch to little endian and execute the kernel. This is not yet complete support for little endian PowerPC, some outstanding issues that I am aware of are: * We only support 32bit PowerPC for now (and indeed, only 44x) * The vdso has not been fixed to be endian agnostic - any userspace program accessing it will get an unexpected result. * I have not touched PCI at all * Remaining device tree accesses still need to be examined to ensure they are correctly handling the endianess of the device tree. * Any other driver that uses the device tree is likely be broken for the same reason. * I've included a patch for the alignment handler, however it is as yet completely untested due to a property of the hardware I've been using for testing. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
