After these change, when need to work in rtbi mode,
just change phy-connection-type to "rtbi".
Also, this work can be done by u-boot.
Signed-off-by: Liu Yu <yu....@freescale.com>
---
arch/powerpc/boot/dts/mpc8569mds.dts | 47 ++++++++++++++++++++++++++++++---
1 files changed, 42 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts
b/arch/powerpc/boot/dts/mpc8569mds.dts
index 795eb36..8b72eaf 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -535,6 +535,7 @@
rx-clock-name = "none";
tx-clock-name = "clk12";
pio-handle = <&pio1>;
+ tbi-handle = <&tbi1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "rgmii-id";
};
@@ -579,7 +580,7 @@
reg = <0x6>;
device_type = "ethernet-phy";
};
- tbi-...@11 {
+ tbi1: tbi-...@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
@@ -590,7 +591,7 @@
reg = <0x3520 0x18>;
compatible = "fsl,ucc-mdio";
- tbi0: tbi-...@15 {
+ tbi6: tbi-...@15 {
reg = <0x15>;
device_type = "tbi-phy";
};
@@ -600,7 +601,7 @@
#size-cells = <0>;
reg = <0x3720 0x38>;
compatible = "fsl,ucc-mdio";
- tbi1: tbi-...@17 {
+ tbi8: tbi-...@17 {
reg = <0x17>;
device_type = "tbi-phy";
};
@@ -617,10 +618,22 @@
rx-clock-name = "none";
tx-clock-name = "clk12";
pio-handle = <&pio3>;
+ tbi-handle = <&tbi3>;
phy-handle = <&qe_phy2>;
phy-connection-type = "rgmii-id";
};
+ m...@2320 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2320 0x18>;
+ compatible = "fsl,ucc-mdio";
+ tbi3: tbi-...@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
enet1: u...@3000 {
device_type = "network";
compatible = "ucc_geth";
@@ -632,10 +645,22 @@
rx-clock-name = "none";
tx-clock-name = "clk17";
pio-handle = <&pio2>;
+ tbi-handle = <&tbi2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rgmii-id";
};
+ m...@3120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ tbi2: tbi-...@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
enet3: u...@3200 {
device_type = "network";
compatible = "ucc_geth";
@@ -647,10 +672,22 @@
rx-clock-name = "none";
tx-clock-name = "clk17";
pio-handle = <&pio4>;
+ tbi-handle = <&tbi4>;
phy-handle = <&qe_phy3>;
phy-connection-type = "rgmii-id";
};
+ m...@3320 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3320 0x18>;
+ compatible = "fsl,ucc-mdio";
+ tbi4: tbi-...@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
enet5: u...@3400 {
device_type = "network";
compatible = "ucc_geth";
@@ -661,7 +698,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
- tbi-handle = <&tbi0>;
+ tbi-handle = <&tbi6>;
phy-handle = <&qe_phy5>;
phy-connection-type = "sgmii";
};
@@ -676,7 +713,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
- tbi-handle = <&tbi1>;
+ tbi-handle = <&tbi8>;
phy-handle = <&qe_phy7>;
phy-connection-type = "sgmii";
};
--
1.6.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
