FSL eSDHC controllers losing signal/interrupt enable states after
reset, so we should re-enable them.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
drivers/mmc/host/sdhci.c | 7 +++++++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index eff615d..b308dbf 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -189,6 +189,7 @@ static void sdhci_disable_card_detection(struct sdhci_host
*host)
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
unsigned long timeout;
+ u32 ier = 0; /* shut up gcc */
if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
@@ -196,6 +197,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
return;
}
+ if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
if (mask & SDHCI_RESET_ALL)
@@ -215,6 +219,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
timeout--;
mdelay(1);
}
+
+ if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
+ sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
}
static void sdhci_init(struct sdhci_host *host)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 44c820a..5c5a950 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -229,6 +229,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<19)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<20)
+/* Controller losing signal/interrupt enable states after reset */
+#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<21)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.5.6.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
