Timur Tabi schrieb:
> Andre Schwarz wrote:
>
>> Timur,
>>
>> is it possible that the PHY adress doesn't match the one specified in
>> the dts ?
>>
>
> What part of the DTS contains the PHY address? I have this:
>
> [EMAIL PROTECTED] {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "fsl,gianfar-mdio";
> reg = <0x24520 0x20>;
>
> /* Vitesse 8201 */
> phy1c: [EMAIL PROTECTED] {
> interrupt-parent = <&ipic>;
> interrupts = <18 0x8>;
> reg = <0x1c>;
> device_type = "ethernet-phy";
> };
> };
>
> enet1: [EMAIL PROTECTED] {
> cell-index = <1>;
> device_type = "network";
> model = "TSEC";
> compatible = "gianfar";
> reg = <0x25000 0x1000>;
> local-mac-address = [ 00 00 00 00 00 00 ];
> interrupts = <35 0x8 36 0x8 37 0x8>;
> phy-connection-type = "mii";
> interrupt-parent = <&ipic>;
>
Your PHY is not on the MDIO bus, i.e. can not be programmed or queried.
Maybe your kernel lacks the mdio-less configuration ?
> /* Vitesse 7385 isn't on the MDIO bus */
> fixed-link = <1 1 1000 0 0>;
> linux,network-index = <1>;
> };
>
>
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht:
Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
