This is needed so that Vitesse 7385 5-port switch could work on MPC8349E-mITX boards.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> --- On Thu, Dec 04, 2008 at 11:15:32AM -0600, Timur Tabi wrote: > The Freescale MPC8349e-MITX reference board has two TSECs, the second > of which (eth1) is attached to a Vitesse 7385 5-port switch. > > Using the latest U-Boot, Kernel, and device tree, I cannot bring up > eth1. When I try, I get this message: > > [EMAIL PROTECTED] root]# ifconfig eth1 up > 0:01 not found > eth1: Could not attach to PHY > SIOCSIFFLAGS: No such device > > Unfortunately, I don't even know what this means. The FIXED_PHY driver isn't enabled in the defconfig. Following patch should fix the issue. arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 2 +- arch/powerpc/configs/mpc83xx_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index e55ff7c..07a674f 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -723,7 +723,7 @@ CONFIG_CICADA_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 15eb30c..d582014 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -682,7 +682,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -- 1.5.6.5 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
