>From: Anton Vorontsov >Sent: Friday, August 01, 2008 11:51 AM > >Works like a charm here. I use quite outdated u-boot though. Which one >you use? I could try it (if it is community u-boot).
I'm using the head, which I grabbed last week: U-Boot 1.3.4-rc1-00012-g1953d12 TIA for checking your itx with this version. > >As for the backtrace you posted recently, I remeber I've noticed the >similar issue long ago on some mITX board. I believe the board had >hw issues indeed (or CF card I tested with). The problem could be in >the IRQ line itself (for some reason it always low), or it could be >IDE cmd/data lines at fault, so that IDE can't receive status read >command and does not deassert the interrupt line... quite hard to >tell. Thanks for confirming.. I was losing my mind :-) This looks like it is indeed a HW problem with the ITX. Are you aware of any threads/documents describing the issue? We based our custom HW off the ITX schematic with regards to the CF, and I hope we didn't copy over _that_ problem :-/ Cheers, Sam _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
