On Sat, 2008-04-12 at 16:28 -0400, Jeff Garzik wrote: > Josh Boyer wrote: > > On Fri, 28 Mar 2008 22:18:25 -0400 > > Jeff Garzik <[EMAIL PROTECTED]> wrote: > > > >> Valentine Barshak wrote: > >>> The PowerPC 440GX Taishan board fails to reset EMAC3 (reset timeout error) > >>> if there's no link. Because of that it fails to find PHY chip. The older > >>> ibm_emac > >>> driver had a workaround for that: the EMAC_CLK_INTERNAL/EMAC_CLK_EXTERNAL > >>> macros, > >>> which toggle the Ethernet Clock Select bit in the SDR0_MFR register. This > >>> patch > >>> does the same for "ibm,emac-440gx" compatible chips. The workaround forces > >>> clock on -all- EMACs, so we select clock under global emac_phy_map_lock. > >>> > >>> Signed-off-by: Valentine Barshak <[EMAIL PROTECTED]> > >>> --- > >>> drivers/net/ibm_newemac/core.c | 16 +++++++++++++++- > >>> drivers/net/ibm_newemac/core.h | 8 ++++++-- > >>> 2 files changed, 21 insertions(+), 3 deletions(-) > >> is this for 2.6.25-rc? > > > > Jeff, can I get an ack from you on this patch, and patch 2 in this > > set? They depend on a patch in my tree and I'd like to include them in > > my next push to Paul for 2.6.26. > > ACK
Many thanks. > I had queried the status of these patches, and didn't receive any reply > initially from my query... Erm... you did. http://ozlabs.org/pipermail/linuxppc-dev/2008-March/053737.html No worries though. I lose email all the time. josh _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
