On Fri, 2008-03-28 at 22:18 -0400, Jeff Garzik wrote: > Valentine Barshak wrote: > > The PowerPC 440GX Taishan board fails to reset EMAC3 (reset timeout error) > > if there's no link. Because of that it fails to find PHY chip. The older > > ibm_emac > > driver had a workaround for that: the EMAC_CLK_INTERNAL/EMAC_CLK_EXTERNAL > > macros, > > which toggle the Ethernet Clock Select bit in the SDR0_MFR register. This > > patch > > does the same for "ibm,emac-440gx" compatible chips. The workaround forces > > clock on -all- EMACs, so we select clock under global emac_phy_map_lock. > > > > Signed-off-by: Valentine Barshak <[EMAIL PROTECTED]> > > --- > > drivers/net/ibm_newemac/core.c | 16 +++++++++++++++- > > drivers/net/ibm_newemac/core.h | 8 ++++++-- > > 2 files changed, 21 insertions(+), 3 deletions(-) > > is this for 2.6.25-rc?
Nah, too late imho. Ben. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
