Valentine Barshak wrote:
The PowerPC 440GX Taishan board fails to reset EMAC3 (reset timeout error)
if there's no link. Because of that it fails to find PHY chip. The older
ibm_emac
driver had a workaround for that: the EMAC_CLK_INTERNAL/EMAC_CLK_EXTERNAL
macros,
which toggle the Ethernet Clock Select bit in the SDR0_MFR register. This patch
does the same for "ibm,emac-440gx" compatible chips. The workaround forces
clock on -all- EMACs, so we select clock under global emac_phy_map_lock.
Signed-off-by: Valentine Barshak <[EMAIL PROTECTED]>
---
drivers/net/ibm_newemac/core.c | 16 +++++++++++++++-
drivers/net/ibm_newemac/core.h | 8 ++++++--
2 files changed, 21 insertions(+), 3 deletions(-)
is this for 2.6.25-rc?
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
