Am Donnerstag, den 08.11.2007, 14:20 -0600 schrieb Scott Wood:
> Sergej Stepanov wrote:
> > If both mdio and mdc controlling pins are on the same processor port,
> > one resource should be used.
> > Otherwise, two resources are used: the 1-st - mdio, the 2-nd - mdc.
>
> How about:
> The first reg resource is the I/O port register block on which MDIO
> resides. The second reg resource is the I/O port register block on
> which MDC resides. If there is only one reg resource, it is used for
> both MDIO and MDC.
>
Ok.
> We also need to change the reference to port C in fsl,mdio-pin and
> fsl,mdc-pin.
Do you mean this:
Currently defined compatibles:
fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
-> fsl,cpm2-mdio-bitbang (reg is port C registers)
Properties for fsl,cpm2-mdio-bitbang:
-> fsl,mdio-pin : pin of port C controlling mdio data
-> fsl,mdc-pin : pin of port C controlling mdio clock
Right. But i thought it would be related to the example,
and than the reader gets the short comment about I/O ports.
Or the other variant would be:
--------------------
iv) MDIO
Currently defined compatibles:
fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
fsl,cpm2-mdio-bitbang (reg is the I/O port register block(s))
Properties for fsl,cpm2-mdio-bitbang:
The first reg resource is the I/O port register block on which MDIO
resides. The second reg resource is the I/O port register block on
which MDC resides. If there is only one reg resource, it is used for
both MDIO and MDC.
fsl,mdio-pin : pin of chosen port for controlling mdio data
fsl,mdc-pin : pin of chosen port for controlling mdio clock
Example:
[EMAIL PROTECTED] {
device_type = "mdio";
compatible = "fsl,mpc8272ads-mdio-bitbang",
"fsl,mpc8272-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
reg = <10d40 14>;
#address-cells = <1>;
#size-cells = <0>;
fsl,mdio-pin = <12>;
fsl,mdc-pin = <13>;
};
-----------------
Regards
Sergej.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
