Am Dienstag, den 06.11.2007, 12:46 -0600 schrieb Scott Wood: > > > > + The "reg"-property may have also depending on board design > > + the following form: > > + reg = <10d40 14 10d60 14>; > > + In that case the pin for mdio data controlling is on the port C, > > + and the pin for mdio clock controlling is on the port D. > > It'd be better to explicitly say that the first resource is mdio, and the > second resource is mdc, rather than require the reader to know/look up which > corresponds to 10d40 and which to 10d60. > > -Scott
Ok. What would you say about something like that: -- If both mdio and mdc controlling pins are on the same processor port, one resource should be used. Otherwise, two resources are used: the 1-st - mdio, the 2-nd - mdc. -- Please, correct me, if it sounds bad. Thanks and regards Sergej. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
