On Fri, 03 Aug 2007 21:10:19 +0400 Sergei Shtylyov <[EMAIL PROTECTED]> wrote:
> I wrote: > > >>Allow generic_calibrate_decr to work for 40x platforms. Given that the > >>hardware > >>behavior is identical, this also changes the set_dec function to reload the > >>PIT > > It's not actually identical. When you're writing to the PIT reg on 40x, > you're alos writing to the hidden PIT auto-reload reg. which is not the case > for 440 that is true Book E. I said the hardware _behavior_ is identical. On both 440 and 405, if the PIT/DEC counts down to 0 and ARE isn't set, it just doesn't tick anymore. The fact that writing to PIT sets the shadow reload reg on 405 doesn't matter since ARE isn't enabled. The same is true for 440 at the moment, since DECAR is never set. > > >>on 40x to match the behavior 44x currently has. > > > Why bother doing this?! This will only warrant you imprecise > > decrementer > > interrupts while it should be interrupting at the precise period currently > > (if > > you load PIT once)... > > I.e. the error will only accumulate. NAK. What error exactly? I'm not following you there. If there really is an error, then we can fix it but it seems that it would be common error for both 440 and 405 at the moment. josh _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
