On Sun, 2014-01-19 at 14:31 +0200, Sagi Grimberg wrote:
> On 1/19/2014 4:44 AM, Nicholas A. Bellinger wrote:
> > From: Nicholas Bellinger <n...@linux-iscsi.org>
> >
> > This patch adds support for DIF protection init/format support into
> > the FILEIO backend.
> >
> > It involves using a seperate $FILE.protection for storing PI that is
> > opened via fd_init_prot() using the common pi_prot_type attribute.
> > The actual formatting of the protection is done via fd_format_prot()
> > using the common pi_prot_format attribute, that will populate the
> > initial PI data based upon the currently configured pi_prot_type.
> >
> > Based on original FILEIO code from Sagi.
>
> Nice! see comments below...
>
> > v1 changes:
> > - Fix sparse warnings in fd_init_format_buf (Fengguang)
> >
> > Cc: Martin K. Petersen <martin.peter...@oracle.com>
> > Cc: Christoph Hellwig <h...@lst.de>
> > Cc: Hannes Reinecke <h...@suse.de>
> > Cc: Sagi Grimberg <sa...@mellanox.com>
> > Cc: Or Gerlitz <ogerl...@mellanox.com>
> > Signed-off-by: Nicholas Bellinger <n...@linux-iscsi.org>
> > ---
> > drivers/target/target_core_file.c | 137
> > +++++++++++++++++++++++++++++++++++++
> > drivers/target/target_core_file.h | 4 ++
> > 2 files changed, 141 insertions(+)
> >
> > diff --git a/drivers/target/target_core_file.c
> > b/drivers/target/target_core_file.c
> > index 0e34cda..119d519 100644
> > --- a/drivers/target/target_core_file.c
> > +++ b/drivers/target/target_core_file.c
> > @@ -700,6 +700,140 @@ static sector_t fd_get_blocks(struct se_device *dev)
> > dev->dev_attrib.block_size);
> > }
> >
> > +static int fd_init_prot(struct se_device *dev)
> > +{
> > + struct fd_dev *fd_dev = FD_DEV(dev);
> > + struct file *prot_file, *file = fd_dev->fd_file;
> > + struct inode *inode;
> > + int ret, flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
> > + char buf[FD_MAX_DEV_PROT_NAME];
> > +
> > + if (!file) {
> > + pr_err("Unable to locate fd_dev->fd_file\n");
> > + return -ENODEV;
> > + }
> > +
> > + inode = file->f_mapping->host;
> > + if (S_ISBLK(inode->i_mode)) {
> > + pr_err("FILEIO Protection emulation only supported on"
> > + " !S_ISBLK\n");
> > + return -ENOSYS;
> > + }
> > +
> > + if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE)
> > + flags &= ~O_DSYNC;
> > +
> > + snprintf(buf, FD_MAX_DEV_PROT_NAME, "%s.protection",
> > + fd_dev->fd_dev_name);
> > +
> > + prot_file = filp_open(buf, flags, 0600);
> > + if (IS_ERR(prot_file)) {
> > + pr_err("filp_open(%s) failed\n", buf);
> > + ret = PTR_ERR(prot_file);
> > + return ret;
> > + }
> > + fd_dev->fd_prot_file = prot_file;
> > +
> > + return 0;
> > +}
> > +
> > +static void fd_init_format_buf(struct se_device *dev, unsigned char *buf,
> > + u32 unit_size, u32 *ref_tag, u16 app_tag,
> > + bool inc_reftag)
> > +{
> > + unsigned char *p = buf;
> > + int i;
> > +
> > + for (i = 0; i < unit_size; i += dev->prot_length) {
> > + *((u16 *)&p[0]) = 0xffff;
> > + *((__be16 *)&p[2]) = cpu_to_be16(app_tag);
> > + *((__be32 *)&p[4]) = cpu_to_be32(*ref_tag);
> > +
> > + if (inc_reftag)
> > + (*ref_tag)++;
> > +
> > + p += dev->prot_length;
> > + }
> > +}
> > +
> > +static int fd_format_prot(struct se_device *dev)
> > +{
> > + struct fd_dev *fd_dev = FD_DEV(dev);
> > + struct file *prot_fd = fd_dev->fd_prot_file;
> > + sector_t prot_length, prot;
> > + unsigned char *buf;
> > + loff_t pos = 0;
> > + u32 ref_tag = 0;
> > + int unit_size = FDBD_FORMAT_UNIT_SIZE * dev->dev_attrib.block_size;
> > + int rc, ret = 0, size, len;
> > + bool inc_reftag = false;
> > +
> > + if (!dev->dev_attrib.pi_prot_type) {
> > + pr_err("Unable to format_prot while pi_prot_type == 0\n");
> > + return -ENODEV;
> > + }
> > + if (!prot_fd) {
> > + pr_err("Unable to locate fd_dev->fd_prot_file\n");
> > + return -ENODEV;
> > + }
> > +
> > + switch (dev->dev_attrib.pi_prot_type) {
> redundant - see below.
> > + case TARGET_DIF_TYPE3_PROT:
> > + ref_tag = 0xffffffff;
> > + break;
> > + case TARGET_DIF_TYPE2_PROT:
> > + case TARGET_DIF_TYPE1_PROT:
> > + inc_reftag = true;
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + buf = vzalloc(unit_size);
> > + if (!buf) {
> > + pr_err("Unable to allocate FILEIO prot buf\n");
> > + return -ENOMEM;
> > + }
> > +
> > + prot_length = (dev->transport->get_blocks(dev) + 1) * dev->prot_length;
> > + size = prot_length;
> > +
> > + pr_debug("Using FILEIO prot_length: %llu\n",
> > + (unsigned long long)prot_length);
> > +
> > + for (prot = 0; prot < prot_length; prot += unit_size) {
> > +
> > + fd_init_format_buf(dev, buf, unit_size, &ref_tag, 0xffff,
> > + inc_reftag);
>
> I didn't send you my latest patches (my fault...).T10-PI format should
> only place
> escape values throughout the protection file (fill it with 0xff). so I
> guess in this case
> fd_init_formast_buf() boils down to memset(buf, 0xff, unit_size) once
> before the loop
> and just loop until prot_length writing buf, no need to address
> apptag/reftag...
Yeah, was thinking about just formatting with escape values as mentioned
above, but thought it might be useful to keep around for pre-populating
values apptag + reftag values for testing purposes.
--nab
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
