This patch make use of the peripheral id macros defined in
dt-bindings/at91/at91rm9200/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezil...@overkiz.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 59 +++++++++++++++++++++----------------
1 file changed, 33 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi
b/arch/arm/boot/dts/at91rm9200.dtsi
index 92b9e21..25c4ab2 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/at91rm9200/peripherals.h>
/ {
model = "Atmel AT91RM9200 family SoC";
@@ -68,7 +69,13 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <25 26 27 28 29 30 31>;
+ atmel,external-irqs = <AT91RM9200_ID_IRQ0
+ AT91RM9200_ID_IRQ1
+ AT91RM9200_ID_IRQ2
+ AT91RM9200_ID_IRQ3
+ AT91RM9200_ID_IRQ4
+ AT91RM9200_ID_IRQ5
+ AT91RM9200_ID_IRQ6>;
};
ramc0: ramc@ffffff00 {
@@ -84,29 +91,29 @@
st: timer@fffffd00 {
compatible = "atmel,at91rm9200-st";
reg = <0xfffffd00 0x100>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
};
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
- 18 IRQ_TYPE_LEVEL_HIGH 0
- 19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91RM9200_ID_TC0
IRQ_TYPE_LEVEL_HIGH 0
+ AT91RM9200_ID_TC1
IRQ_TYPE_LEVEL_HIGH 0
+ AT91RM9200_ID_TC2
IRQ_TYPE_LEVEL_HIGH 0>;
};
tcb1: timer@fffa4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa4000 0x100>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
- 21 IRQ_TYPE_LEVEL_HIGH 0
- 22 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91RM9200_ID_TC3
IRQ_TYPE_LEVEL_HIGH 0
+ AT91RM9200_ID_TC4
IRQ_TYPE_LEVEL_HIGH 0
+ AT91RM9200_ID_TC5
IRQ_TYPE_LEVEL_HIGH 0>;
};
i2c0: i2c@fffb8000 {
compatible = "atmel,at91rm9200-i2c";
reg = <0xfffb8000 0x4000>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91RM9200_ID_TWI
IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
#address-cells = <1>;
@@ -117,7 +124,7 @@
mmc0: mmc@fffb4000 {
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91RM9200_ID_MCI
IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -126,7 +133,7 @@
ssc0: ssc@fffd0000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd0000 0x4000>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_SSC0
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disable";
@@ -135,7 +142,7 @@
ssc1: ssc@fffd4000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd4000 0x4000>;
- interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_SSC1
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disable";
@@ -144,7 +151,7 @@
ssc2: ssc@fffd8000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd8000 0x4000>;
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_SSC2
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
status = "disable";
@@ -153,7 +160,7 @@
macb0: ethernet@fffbc000 {
compatible = "cdns,at91rm9200-emac",
"cdns,emac";
reg = <0xfffbc000 0x4000>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91RM9200_ID_EMAC
IRQ_TYPE_LEVEL_HIGH 3>;
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
@@ -490,7 +497,7 @@
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91RM9200_ID_PIOA
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -500,7 +507,7 @@
pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91RM9200_ID_PIOB
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -510,7 +517,7 @@
pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91RM9200_ID_PIOC
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -520,7 +527,7 @@
pioD: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91RM9200_ID_PIOD
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -531,7 +538,7 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -540,7 +547,7 @@
usart0: serial@fffc0000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffc0000 0x200>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_US0
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -551,7 +558,7 @@
usart1: serial@fffc4000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffc4000 0x200>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_US1
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -562,7 +569,7 @@
usart2: serial@fffc8000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffc8000 0x200>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_US2
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -573,7 +580,7 @@
usart3: serial@fffcc000 {
compatible = "atmel,at91rm9200-usart";
reg = <0xfffcc000 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91RM9200_ID_US3
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -584,7 +591,7 @@
usb1: gadget@fffb0000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91RM9200_ID_UDP
IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
@@ -593,7 +600,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffe0000 0x200>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91RM9200_ID_SPI
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -620,7 +627,7 @@
usb0: ohci@00300000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91RM9200_ID_UHP IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
