This patch make use of the peripheral id macros defined in
dt-bindings/at91/at91sam9n12/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezil...@overkiz.com>
---
arch/arm/boot/dts/at91sam9n12.dtsi | 43 ++++++++++++++++++------------------
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi
b/arch/arm/boot/dts/at91sam9n12.dtsi
index bb7f564..5e082f4 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/at91sam9n12/peripherals.h>
/ {
model = "Atmel AT91SAM9N12 SoC";
@@ -65,7 +66,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <31>;
+ atmel,external-irqs = <AT91SAM9N12_ID_IRQ0>;
};
ramc0: ramc@ffffe800 {
@@ -86,7 +87,7 @@
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
};
shdwc@fffffe10 {
@@ -97,7 +98,7 @@
mmc0: mmc@f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9N12_ID_MCI
IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -108,19 +109,19 @@
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9N12_ID_TCB
IRQ_TYPE_LEVEL_HIGH 0>;
};
tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9N12_ID_TCB
IRQ_TYPE_LEVEL_HIGH 0>;
};
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9N12_ID_DMA
IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
};
@@ -370,7 +371,7 @@
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9N12_ID_PIOAB
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -380,7 +381,7 @@
pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9N12_ID_PIOAB
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -390,7 +391,7 @@
pioC: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9N12_ID_PIOCD
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -400,7 +401,7 @@
pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9N12_ID_PIOCD
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -411,7 +412,7 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -420,7 +421,7 @@
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
- interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9N12_ID_SSC
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
@@ -429,7 +430,7 @@
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9N12_ID_USART0
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -438,7 +439,7 @@
usart1: serial@f8020000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x4000>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9N12_ID_USART1
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -447,7 +448,7 @@
usart2: serial@f8024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x4000>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9N12_ID_USART2
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
@@ -456,7 +457,7 @@
usart3: serial@f8028000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x4000>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9N12_ID_USART3
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
@@ -465,7 +466,7 @@
i2c0: i2c@f8010000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9N12_ID_TWI0
IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
<&dma 1 AT91_DMA_CFG_PER_ID(14)>;
dma-names = "tx", "rx";
@@ -477,7 +478,7 @@
i2c1: i2c@f8014000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9N12_ID_TWI1
IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
<&dma 1 AT91_DMA_CFG_PER_ID(16)>;
dma-names = "tx", "rx";
@@ -491,7 +492,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9N12_ID_SPI0
IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
<&dma 1 AT91_DMA_CFG_PER_ID(2)>;
dma-names = "tx", "rx";
@@ -505,7 +506,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9N12_ID_SPI1
IRQ_TYPE_LEVEL_HIGH 3>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
<&dma 1 AT91_DMA_CFG_PER_ID(4)>;
dma-names = "tx", "rx";
@@ -545,7 +546,7 @@
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9N12_ID_UHP IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
