This patch make use of the peripheral id macros defined in
dt-bindings/at91/at91sam9263/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezil...@overkiz.com>
---
arch/arm/boot/dts/at91sam9263.dtsi | 46 +++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi
b/arch/arm/boot/dts/at91sam9263.dtsi
index d5bd65f..590fd7b 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/at91sam9263/peripherals.h>
/ {
model = "Atmel AT91SAM9263 family SoC";
@@ -62,7 +63,8 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <30 31>;
+ atmel,external-irqs = <AT91SAM9263_ID_IRQ0
+ AT91SAM9263_ID_IRQ1>;
};
pmc: pmc@fffffc00 {
@@ -79,13 +81,13 @@
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9263_ID_TCB
IRQ_TYPE_LEVEL_HIGH 0>;
};
rstc@fffffd00 {
@@ -369,7 +371,7 @@
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9263_ID_PIOA
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -379,7 +381,7 @@
pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9263_ID_PIOB
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -389,7 +391,7 @@
pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9263_ID_PIOCDE
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -399,7 +401,7 @@
pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9263_ID_PIOCDE
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -409,7 +411,7 @@
pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9263_ID_PIOCDE
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -420,7 +422,7 @@
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -429,7 +431,7 @@
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9263_ID_US0
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -440,7 +442,7 @@
usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9263_ID_US1
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -451,7 +453,7 @@
usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9263_ID_US2
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -462,7 +464,7 @@
ssc0: ssc@fff98000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9263_ID_SSC0
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
@@ -471,7 +473,7 @@
ssc1: ssc@fff9c000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9263_ID_SSC1
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
@@ -480,7 +482,7 @@
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb",
"cdns,macb";
reg = <0xfffbc000 0x100>;
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9263_ID_EMAC
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
@@ -489,14 +491,14 @@
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfff78000 0x4000>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9263_ID_UDP
IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
i2c0: i2c@fff88000 {
compatible = "atmel,at91sam9263-i2c";
reg = <0xfff88000 0x100>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9263_ID_TWI
IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -505,7 +507,7 @@
mmc0: mmc@fff80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9263_ID_MCI0
IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -514,7 +516,7 @@
mmc1: mmc@fff84000 {
compatible = "atmel,hsmci";
reg = <0xfff84000 0x600>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9263_ID_MCI1
IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -531,7 +533,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9263_ID_SPI0
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -542,7 +544,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
- interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9263_ID_SPI1
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
@@ -570,7 +572,7 @@
usb0: ohci@00a00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
- interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9263_ID_UHP IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
