On 2026-03-10 13:31, Konrad Dybcio wrote:
On 3/9/26 10:36 PM, [email protected] wrote:
On 2026-03-09 22:19, [email protected] wrote:
On 2026-03-09 13:53, Konrad Dybcio wrote:
On 3/5/26 6:28 PM, Barnabás Czémán wrote:
Redmi Go (tiare) is like Redmi 5A with small differences like
charging,
fuel gauge and different speaker codec.
Signed-off-by: Barnabás Czémán <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts | 27
+++++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile
b/arch/arm64/boot/dts/qcom/Makefile
index 20e161e843ed..a74598cf0b47 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=
msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-rolex.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-tiare.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8937-xiaomi-land.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts
b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts
new file mode 100644
index 000000000000..c3a74530c34c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2026, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include "msm8917-xiaomi-riva-common.dtsi"
+
+/ {
+ model = "Xiaomi Redmi Go (tiare)";
+ compatible = "xiaomi,tiare", "qcom,msm8917";
+
+ qcom,board-id = <0x1000b 1>;
Could you please double-check this? Riva and Rolex seem to have
properly different values there, but this one mimics one of the
values for Rolex.
riva value is depends from the bootloader, Oreo bootloader using same
value
like rolex and tiare, 2nd entry in the board-id is not used so i
should remove it.
Here is some more context:
https://github.com/msm8916-mainline/lk2nd/blob/main/lk2nd/device/dts/msm8952/msm8917-xiaomi-riva.dts
https://github.com/msm8916-mainline/lk2nd/blob/main/lk2nd/device/dts/msm8952/msm8917-xiaomi-common.dts
I have find out this qcom,board-id = <0x1000b 1>, <0x1000b 2>; works
with both bootloader version
on riva but if i set only one of them, the bootloader version will be
limited.
These properties exist for the sole reason of making the bootloader
happy, so if there's nuance, let's not try being too smart and just
stick with what works
I have tested this on both version.
Konrad
