On Mon, 30 Sep 2019 13:44:49 -0700
Yizhuo <yzhai...@ucr.edu> wrote:
> Several functions in this file are trying to use regmap_read() to
> initialize the specific variable, however, if regmap_read() fails,
> the variable could be uninitialized but used directly, which is
> potentially unsafe. The return value of regmap_read() should be
> checked and handled. This patch fixes most of the uninitialized
> variables, but those in function stm32_tt_read_frequency() are
> hard to handle and need extra effot.
>
> Signed-off-by: Yizhuo <yzhai...@ucr.edu>
Hi Yizhuo,
This is a slightly interesting case.
From an 'obviously' correct point of view, it makes sense to
always handle the errors and avoid the potentially uninitialised
cases.
From the point of view of a 'fix' we need to show if these can
actually happen. These calls are regmap-mmio so the error
path is in clock enable / disable if there is a clock provided.
Looking at mfd/stm-timers.c there is a clock called "int" provided.
Now it's possible that clock enable can never fail, but that is
getting too hard to chase down.
As such, I think this fix is worthwhile, but I'm not going to
mark it for stable without a report of it actually being
possible to trigger it.
I'll leave this on the list for a little longer though as I'd definitely
like an ack from Benjamin or someone else more familiar with the driver
than I am.
Thanks,
Jonathan
> ---
> drivers/iio/trigger/stm32-timer-trigger.c | 98 ++++++++++++++++++++---
> 1 file changed, 85 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c
> b/drivers/iio/trigger/stm32-timer-trigger.c
> index a5dfe65cd9b9..f8ea7bcbb739 100644
> --- a/drivers/iio/trigger/stm32-timer-trigger.c
> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
> @@ -107,6 +107,7 @@ static int stm32_timer_start(struct stm32_timer_trigger
> *priv,
> unsigned long long prd, div;
> int prescaler = 0;
> u32 ccer, cr1;
> + int ret;
>
> /* Period and prescaler values depends of clock rate */
> div = (unsigned long long)clk_get_rate(priv->clk);
> @@ -132,11 +133,21 @@ static int stm32_timer_start(struct stm32_timer_trigger
> *priv,
> }
>
> /* Check if nobody else use the timer */
> - regmap_read(priv->regmap, TIM_CCER, &ccer);
> + ret = regmap_read(priv->regmap, TIM_CCER, &ccer);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CCER.\n");
> + return ret;
> + }
> +
> if (ccer & TIM_CCER_CCXE)
> return -EBUSY;
>
> - regmap_read(priv->regmap, TIM_CR1, &cr1);
> + ret = regmap_read(priv->regmap, TIM_CR1, &cr1);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CR1.\n");
> + return ret;
> + }
> +
> if (!(cr1 & TIM_CR1_CEN))
> clk_enable(priv->clk);
>
> @@ -164,12 +175,23 @@ static int stm32_timer_start(struct stm32_timer_trigger
> *priv,
> static void stm32_timer_stop(struct stm32_timer_trigger *priv)
> {
> u32 ccer, cr1;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, TIM_CCER, &ccer);
> + if (ret) {
> + dev_err(priv->dev, "Fail to read TIM_CCER.\n");
> + return;
> + }
>
> - regmap_read(priv->regmap, TIM_CCER, &ccer);
> if (ccer & TIM_CCER_CCXE)
> return;
>
> - regmap_read(priv->regmap, TIM_CR1, &cr1);
> + ret = regmap_read(priv->regmap, TIM_CR1, &cr1);
> + if (ret) {
> + dev_err(priv->dev, "Fail to read TIM_CR1.\n");
> + return;
> + }
> +
> if (cr1 & TIM_CR1_CEN)
> clk_disable(priv->clk);
>
> @@ -403,20 +425,36 @@ static int stm32_counter_read_raw(struct iio_dev
> *indio_dev,
> {
> struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> u32 dat;
> + int ret;
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> - regmap_read(priv->regmap, TIM_CNT, &dat);
> + ret = regmap_read(priv->regmap, TIM_CNT, &dat);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CNT.\n");
> + return ret;
> + }
> +
> *val = dat;
> return IIO_VAL_INT;
>
> case IIO_CHAN_INFO_ENABLE:
> - regmap_read(priv->regmap, TIM_CR1, &dat);
> + ret = regmap_read(priv->regmap, TIM_CR1, &dat);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CR1.\n");
> + return ret;
> + }
> +
> *val = (dat & TIM_CR1_CEN) ? 1 : 0;
> return IIO_VAL_INT;
>
> case IIO_CHAN_INFO_SCALE:
> - regmap_read(priv->regmap, TIM_SMCR, &dat);
> + ret = regmap_read(priv->regmap, TIM_SMCR, &dat);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_SMCR.\n");
> + return ret;
> + }
> +
> dat &= TIM_SMCR_SMS;
>
> *val = 1;
> @@ -438,6 +476,7 @@ static int stm32_counter_write_raw(struct iio_dev
> *indio_dev,
> {
> struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> u32 dat;
> + int ret;
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> @@ -449,13 +488,23 @@ static int stm32_counter_write_raw(struct iio_dev
> *indio_dev,
>
> case IIO_CHAN_INFO_ENABLE:
> if (val) {
> - regmap_read(priv->regmap, TIM_CR1, &dat);
> + ret = regmap_read(priv->regmap, TIM_CR1, &dat);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CR1.\n");
> + return ret;
> + }
> +
> if (!(dat & TIM_CR1_CEN))
> clk_enable(priv->clk);
> regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
> TIM_CR1_CEN);
> } else {
> - regmap_read(priv->regmap, TIM_CR1, &dat);
> + ret = regmap_read(priv->regmap, TIM_CR1, &dat);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CR1.\n");
> + return ret;
> + }
> +
> regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
> 0);
> if (dat & TIM_CR1_CEN)
> @@ -517,8 +566,13 @@ static int stm32_get_trigger_mode(struct iio_dev
> *indio_dev,
> {
> struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> u32 smcr;
> + int ret;
>
> - regmap_read(priv->regmap, TIM_SMCR, &smcr);
> + ret = regmap_read(priv->regmap, TIM_SMCR, &smcr);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_SMCR.\n");
> + return ret;
> + }
>
> return (smcr & TIM_SMCR_SMS) == TIM_SMCR_SMS ? 0 : -EINVAL;
> }
> @@ -557,6 +611,7 @@ static int stm32_set_enable_mode(struct iio_dev
> *indio_dev,
> struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> int sms = stm32_enable_mode2sms(mode);
> u32 val;
> + int ret;
>
> if (sms < 0)
> return sms;
> @@ -565,7 +620,12 @@ static int stm32_set_enable_mode(struct iio_dev
> *indio_dev,
> * enable counter clock, so it can use it. Keeps it in sync with CEN.
> */
> if (sms == 6) {
> - regmap_read(priv->regmap, TIM_CR1, &val);
> + ret = regmap_read(priv->regmap, TIM_CR1, &val);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CR1.\n");
> + return ret;
> + }
> +
> if (!(val & TIM_CR1_CEN))
> clk_enable(priv->clk);
> }
> @@ -594,8 +654,14 @@ static int stm32_get_enable_mode(struct iio_dev
> *indio_dev,
> {
> struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> u32 smcr;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, TIM_SMCR, &smcr);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_SMCR.\n");
> + return ret;
> + }
>
> - regmap_read(priv->regmap, TIM_SMCR, &smcr);
> smcr &= TIM_SMCR_SMS;
>
> return stm32_sms2enable_mode(smcr);
> @@ -706,13 +772,19 @@ EXPORT_SYMBOL(is_stm32_timer_trigger);
> static void stm32_timer_detect_trgo2(struct stm32_timer_trigger *priv)
> {
> u32 val;
> + int ret;
>
> /*
> * Master mode selection 2 bits can only be written and read back when
> * timer supports it.
> */
> regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, TIM_CR2_MMS2);
> - regmap_read(priv->regmap, TIM_CR2, &val);
> + ret = regmap_read(priv->regmap, TIM_CR2, &val);
> + if (ret) {
> + dev_err(priv->dev, "fail to read TIM_CR2.\n");
> + return;
> + }
> +
> regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
> priv->has_trgo2 = !!val;
> }
