[PATCH v2 3/3] arm64: allwinner: h6: add i2c0 node in PineH64

[Bhushan Shah]

i2c0 bus is exposed by PI-2 BUS in the PineH64, model B.

Signed-off-by: Bhushan Shah <bs...@kde.org>
---
Changes in v2:
  - Don't enable the i2c0 node in PineH64 by default

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 684d1daa3081..97d9b7c63fb3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -160,6 +160,15 @@
        vcc-pg-supply = <&reg_aldo1>;
 };
 
+/* This i2c interface is exposed on PI-2 BUS, Pin 3 (I2C_SDA) and 5 (I2C_SCL) 
*/
+&i2c0 {
+       status = "disabled";
+};
+
+&i2c0_pins {
+       bias-pull-up;
+};
+
 &r_i2c {
        status = "okay";
 
-- 
2.17.1