[PATCH v4 4/6] thermal: tsens: Add support for SDM845

[Amit Kucheria]

SDM845 uses v2.4.0 of the TSENS IP block but the get_temp() function
appears to be identical across v2.x.y in code seen so far. We use the
generic get_temp() function.

Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 2 ++
 drivers/thermal/qcom/tsens-v2.c                          | 6 +++++-
 drivers/thermal/qcom/tsens.c                             | 6 ++++++
 drivers/thermal/qcom/tsens.h                             | 5 ++++-
 4 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt 
b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8..075182e 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -5,6 +5,8 @@ Required properties:
  - "qcom,msm8916-tsens" : For 8916 Family of SoCs
  - "qcom,msm8974-tsens" : For 8974 Family of SoCs
  - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+ - "qcom,tsens-v2.4.0"  : For SDM845 Family of SoCs
+ - "qcom,tsens-v2"      : Generic fallback binding for any Soc using 2.x.y 
version of the tsens IP
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 2eca7ff..1871945 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -69,8 +69,12 @@ static const struct tsens_ops ops_generic_v2 = {
        .get_temp       = get_temp_tsens_v2,
 };
 
+const struct tsens_data data_tsens_v2 = {
+       .ops            = &ops_generic_v2,
+};
+
+/* Kept around for backward compatibility with old msm8996.dtsi */
 const struct tsens_data data_8996 = {
        .num_sensors    = 13,
        .ops            = &ops_generic_v2,
 };
-
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3440166c..992ed17 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -72,6 +72,12 @@ static const struct of_device_id tsens_table[] = {
        }, {
                .compatible = "qcom,msm8996-tsens",
                .data = &data_8996,
+       }, {
+               .compatible = "qcom,tsens-v2.4.0",
+               .data = &data_tsens_v2,
+       }, {
+               .compatible = "qcom,tsens-v2",
+               .data = &data_tsens_v2,
        },
        {}
 };
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index dc56e1e..69212cb 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -87,6 +87,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, 
u32 *, u32);
 int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+/* TSENS v1 targets */
+extern const struct tsens_data data_8916, data_8974, data_8960;
+/* TSENS v2 targets */
+extern const struct tsens_data data_8996, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */
-- 
2.7.4