From: Patrick Bruenn <p.bru...@beckhoff.com>
Add RTC_DRV_MXC_V2 config option
Signed-off-by: Patrick Bruenn <p.bru...@beckhoff.com>
---
To: Alessandro Zummo <a.zu...@towertech.it>
To: Alexandre Belloni <alexandre.bell...@free-electrons.com>
Cc: Rob Herring <robh...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com> (maintainer:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS)
Cc: linux-...@vger.kernel.org (open list:REAL TIME CLOCK (RTC) SUBSYSTEM)
Cc: devicet...@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE
TREE BINDINGS)
Cc: linux-kernel@vger.kernel.org (open list)
Cc: Fabio Estevam <fabio.este...@nxp.com>
Cc: Juergen Borleis <j...@pengutronix.de>
Cc: Noel Vellemans <noel.vellem...@visionbms.com>
Cc: Shawn Guo <shawn...@kernel.org>
Cc: Sascha Hauer <ker...@pengutronix.de> (maintainer:ARM/FREESCALE IMX / MXC
ARM ARCHITECTURE)
Cc: Russell King <li...@armlinux.org.uk> (maintainer:ARM PORT)
Cc: linux-arm-ker...@lists.infradead.org (moderated list:ARM/FREESCALE IMX /
MXC ARM ARCHITECTURE)
Cc: Philippe Ombredanne <pombreda...@nexb.com>
Cc: Lothar Waßmann <l...@karo-electronics.de>
---
drivers/rtc/Kconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b59a31b079a5..440edebf5c71 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1689,6 +1689,16 @@ config RTC_DRV_MXC
This driver can also be built as a module, if so, the module
will be called "rtc-mxc".
+config RTC_DRV_MXC_V2
+ tristate "Freescale MXC Real Time Clock for i.MX53"
+ depends on ARCH_MXC
+ help
+ If you say yes here you get support for the Freescale MXC
+ SRTC module in i.MX53 processor.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-mxc_v2".
+
config RTC_DRV_SNVS
tristate "Freescale SNVS RTC support"
select REGMAP_MMIO
--
2.11.0
