Hi Fabio,
On Mon, Jul 24, 2017 at 2:49 PM, Fabio Estevam <feste...@gmail.com> wrote:
>
> Hi Gary,
>
> On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson
> <gary.bis...@boundarydevices.com> wrote:
>
> > +
> > + reg_usb_h1_vbus: regulator@7 {
> > + compatible = "regulator-fixed";
> > + reg = <7>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usbh1>;
> > + regulator-name = "usb_h1_vbus";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + regulator-always-on;
>
> As this regulator is controlled via GPIO I believe you should remove
> the ' regulator-always-on' property.
>
> Same applies to 2/2/
Good catch, I'll send a v2 right away.
Thanks,
Gary
