[PATCH v2 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset

[Gary Bisson]

Declared as a regulator since the driver doesn't have a reset-gpios
property for this.

This ensures that the PHY is woken up, not depending on the state the
second stage bootloader leaves the pin.

This is a workaround until a proper mechanism is provided to reset such
devices like the pwrseq library [1] for instance.

[1] https://lkml.org/lkml/2017/2/10/779

Signed-off-by: Gary Bisson <gary.bis...@boundarydevices.com>
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi 
b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index afe7449c47da..756c5054f047 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -123,6 +123,18 @@
                        regulator-max-microvolt = <2800000>;
                        regulator-always-on;
                };
+
+               reg_usb_h1_vbus: regulator@7 {
+                       compatible = "regulator-fixed";
+                       reg = <7>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usbh1>;
+                       regulator-name = "usb_h1_vbus";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+                       enable-active-high;
+               };
        };
 
        mipi_xclk: mipi_xclk {
@@ -610,6 +622,12 @@
                        >;
                };
 
+               pinctrl_usbh1: usbh1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x030b0
+                       >;
+               };
+
                pinctrl_usbotg: usbotggrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
@@ -705,6 +723,7 @@
 };
 
 &usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
        status = "okay";
 };
 
-- 
2.11.0