Hi Gary,
On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson
<gary.bis...@boundarydevices.com> wrote:
> +
> + reg_usb_h1_vbus: regulator@7 {
> + compatible = "regulator-fixed";
> + reg = <7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbh1>;
> + regulator-name = "usb_h1_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-always-on;
As this regulator is controlled via GPIO I believe you should remove
the ' regulator-always-on' property.
Same applies to 2/2/
