[ Added some people to the cc.. Len, Thomas, Ingo - look for the exact report on linux-kernel, but basically it's a "irq 9: nobody cared" issue with acpi_irq on irq9 ]
On Sat, 7 Apr 2007, Soeren Sonnenburg wrote: > > regression update for 21-rc6: > > 1) all s2ram and NO_HZ related things seem to be resolved on my macbook > pro, also > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > > don't break resume anymore. Goodie. I think we fixed most stuff.. > 2) However I am still having problems with > +CONFIG_HIGH_RES_TIMERS=y > +CONFIG_HPET=y > +CONFIG_HPET_MMAP=y > although the machine resumes, I've managed to get the attached oops. Ok, interesting. I'd have blamed ACPI for this one (stuck IRQ9 is almost always some ACPI event that got stuck or the SCI got mis-routed and/or marked with the wrong polarity), although from your message I take it you don't get it without high-res timers? In fact, I have a theory.. Your backtrace is: [<c0119637>] smp_apic_timer_interrupt+0x57/0x90 [<c0142d30>] retrigger_next_event+0x0/0xb0 [<c0104d30>] apic_timer_interrupt+0x28/0x30 [<c0142d30>] retrigger_next_event+0x0/0xb0 [<c0140068>] __kfifo_put+0x8/0x90 [<c0130fe5>] on_each_cpu+0x35/0x60 [<c0143538>] clock_was_set+0x18/0x20 [<c0135cdc>] timekeeping_resume+0x7c/0xa0 [<c02aabe1>] __sysdev_resume+0x11/0x80 [<c02ab0c7>] sysdev_resume+0x47/0x80 [<c02b0b05>] device_power_up+0x5/0x10 and the thing is, I don't think we should have interrupt enabled at this point in time! I susect that the timer resume enables interrupts too early! We should be doing the whole "device_power_up()" sequence with irq's off, I think.. > 3) Subject : SATA breakage on resume > References : http://lkml.org/lkml/2007/3/7/233 > Submitter : Thomas Gleixner <[EMAIL PROTECTED]> > Soeren Sonnenburg <[EMAIL PROTECTED]> > Status : unknown > > I am still seeing these messages after a suspend/resume cycle (though > all devices work even after multiple suspend/resume cycles) > > ATA: abnormal status 0x80 on port 0x000140df This seems to be normal, and related to some unknown timing issue. If the thing works for you apart from the message, I'd just ignore it.. Linus - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
