On Wed, 4 May 2016 11:54:16 +0000 Eric Auger <eric.au...@linaro.org> wrote:
> On x86 IRQ remapping is abstracted by the IOMMU. On ARM this is abstracted > by the msi controller. vfio_safe_irq_domain allows to check whether > interrupts are "safe" for a given device. They are if the device does > not use MSI Are we sure we're not opening a security hole here? An MSI is simply a DMA write, so really whether or not a device uses MSI is irrelevant. If it can generate a DMA to the MSI doorbell then we need to be protected and I think we pretty much need to assume that devices are DMA capable. Do the MSI domain checks cover this? > or if the device uses MSI and the msi-parent controller > supports IRQ remapping. > > Then we check at group level if all devices have safe interrupts: if not, > we only allow the group to be attached if allow_unsafe_interrupts is set. > > At this point ARM sMMU still advertises IOMMU_CAP_INTR_REMAP. This is > changed in next patch. > > Signed-off-by: Eric Auger <eric.au...@linaro.org> > > --- > v3 -> v4: > - rename vfio_msi_parent_irq_remapping_capable into vfio_safe_irq_domain > and irq_remapping into safe_irq_domains > > v2 -> v3: > - protect vfio_msi_parent_irq_remapping_capable with > CONFIG_GENERIC_MSI_IRQ_DOMAIN > --- > drivers/vfio/vfio_iommu_type1.c | 44 > +++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 42 insertions(+), 2 deletions(-) > > diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c > index 4d3a6f1..2fc8197 100644 > --- a/drivers/vfio/vfio_iommu_type1.c > +++ b/drivers/vfio/vfio_iommu_type1.c > @@ -37,6 +37,8 @@ > #include <linux/vfio.h> > #include <linux/workqueue.h> > #include <linux/msi-iommu.h> > +#include <linux/irqdomain.h> > +#include <linux/msi.h> > > #define DRIVER_VERSION "0.2" > #define DRIVER_AUTHOR "Alex Williamson <alex.william...@redhat.com>" > @@ -777,6 +779,33 @@ static int vfio_bus_type(struct device *dev, void *data) > return 0; > } > > +/** > + * vfio_safe_irq_domain: returns whether the irq domain > + * the device is attached to is safe with respect to MSI isolation. > + * If the irq domain is not an MSI domain, we return it is safe. > + * > + * @dev: device handle > + * @data: unused > + * returns 0 if the irq domain is safe, -1 if not. > + */ > +static int vfio_safe_irq_domain(struct device *dev, void *data) > +{ > +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN > + struct irq_domain *domain; > + struct msi_domain_info *info; > + > + domain = dev_get_msi_domain(dev); > + if (!domain) > + return 0; > + > + info = msi_get_domain_info(domain); > + > + if (!(info->flags & MSI_FLAG_IRQ_REMAPPING)) > + return -1; > +#endif > + return 0; > +} > + > static int vfio_iommu_replay(struct vfio_iommu *iommu, > struct vfio_domain *domain) > { > @@ -870,7 +899,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data, > struct vfio_group *group, *g; > struct vfio_domain *domain, *d; > struct bus_type *bus = NULL; > - int ret; > + int ret, safe_irq_domains; > > mutex_lock(&iommu->lock); > > @@ -893,6 +922,13 @@ static int vfio_iommu_type1_attach_group(void > *iommu_data, > > group->iommu_group = iommu_group; > > + /* > + * Determine if all the devices of the group have a safe irq domain > + * with respect to MSI isolation > + */ > + safe_irq_domains = !iommu_group_for_each_dev(iommu_group, &bus, > + vfio_safe_irq_domain); > + > /* Determine bus_type in order to allocate a domain */ > ret = iommu_group_for_each_dev(iommu_group, &bus, vfio_bus_type); > if (ret) > @@ -920,8 +956,12 @@ static int vfio_iommu_type1_attach_group(void > *iommu_data, > INIT_LIST_HEAD(&domain->group_list); > list_add(&group->next, &domain->group_list); > > + /* > + * to advertise safe interrupts either the IOMMU or the MSI controllers > + * must support IRQ remapping/interrupt translation > + */ > if (!allow_unsafe_interrupts && > - !iommu_capable(bus, IOMMU_CAP_INTR_REMAP)) { > + (!iommu_capable(bus, IOMMU_CAP_INTR_REMAP) && !safe_irq_domains)) { > pr_warn("%s: No interrupt remapping support. Use the module > param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this > platform\n", > __func__); > ret = -EPERM;