Ah I am getting Page Not Found on a lot of the links on the 'latest' directory.
https://releases.linaro.org/debian/boards/snapdragon/16.01/ Seems okay though On 26 January 2016 at 11:40, Aaron Gray <aaronngray.li...@gmail.com> wrote: > Looking at https://releases.linaro.org/debian/boards/snapdragon/latest/ > > I can see I need > boot-qcom-apq8064-cm-qs600-qcom-snapdragon-20151210-20.img.gz > <https://releases.linaro.org/debian/boards/snapdragon/latest/boot-qcom-apq8064-cm-qs600-qcom-snapdragon-20151210-20.img.gz> > and qcom-apq8064-cm-qs600.dtb > <https://releases.linaro.org/debian/boards/snapdragon/latest/qcom-apq8064-cm-qs600.dtb> > for > the Utilite but not sure if it supports the Version 1 devices ? > > I am really not sure what to do with all the files to make a distro with > them and Jessie though I have an idea what they are and am used to x86 > Linux ISO's. > > Help ! > > > > > On 26 January 2016 at 01:37, Wookey <woo...@wookware.org> wrote: > >> +++ Aaron Gray [2016-01-25 23:14 +0000]: >> > Hi, >> > >> > I have a couple of ARM devices that I bought quite a while back and >> > want to put them into use. I am not sure if this is the best linaro >> > list but I could not see another that seemed appropriate. >> > >> > I have a Utilite Version 1 device and a IFC6410 device that I want to >> > get working with Linaro. >> > >> > I am a C/C++/x86 programmer. >> > >> > Also I am familiar with the Linux Kernel from 2.4/6 days, and have run >> > personal Fedora servers for over 7 years. Now I want to replace my HP >> > DL 140 G3's with the ARM based servers. >> > >> > I built a Kali release for the Utilite some time ago which was quite >> > straight forward and then tried unsuccessfully to backport it to >> > Debian. >> > >> > So what I want to know is two things basically >> > >> > a) can Linaro run on the Utilite Version 1, is the uBoot stuff >> > different from the version 2 and is there kernel support for the >> > version 1 >> >> Linaro is not a distro ;-) Although it does put out quite a lot of >> images. Did you have a particular one in mind? >> >> Here is a page on installing Debian which may be helpful (I know nothing >> of the Utilite) >> https://wiki.debian.org/InstallingDebianOn/CompuLab/PC-Utilite/wheezy >> >> It may well have got rather easier since that was written. Other imx6 >> boards are somewhat supported in jessie, although most seem to need a >> custom >> kernel: https://boundarydevices.com/debian-installer-on-i-mx6/ >> >> > b) It there an easy HOWTO to put the distro together onto an >> > uSDCard for the Utilite >> > >> > c) It there an easy HOWTO to put the distro together onto an >> > uSDCard for the IFC6410 >> > >> > Hope you can point me in the right direction. >> >> The above links may help. >> >> Wookey >> -- >> Principal hats: Linaro, Debian, Wookware, ARM >> http://wookware.org/ >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev@lists.linaro.org >> https://lists.linaro.org/mailman/listinfo/linaro-dev >> >> >
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-dev